Hi All, For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP. Please find the error messages and logs below. Would be great if anyone could help. [root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] Remember to run discovery for the device afterwards. This is my /etc/sysconfig/snmpd file # snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a" This is my /etc/snmp/snmpd.conf file com2sec readonly default 0bs3rv1um group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address #Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~ Whenever I do “service snmpd restart”, I can see the following error message in /var/log/messages Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5 Appreciate your time and assistance. Thanks, Gokul
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port]
[udp|udp6|tcp|tcp6]
add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des]
[port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Please re-read what Adam said.
Obs3rv1um != 0bs3rv1um
On 2013-10-21 10:01, Gokul Kannan wrote:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
As Adam said, look at the community string!
Cheers, Stefano Il 21/ott/2013 10:33 "Gokul Kannan" gokul_ps@yahoo.com ha scritto:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote: What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote: 0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
No. I double checked it. Using just "observium" as my community string now. Still same old error message.
Thanks, Gokul
On Monday, 21 October 2013 2:18 PM, Stefano Cordio stefano.cordio@gmail.com wrote:
As Adam said, look at the community string! Cheers, Stefano Il 21/ott/2013 10:33 "Gokul Kannan" gokul_ps@yahoo.com ha scritto:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the
problem
is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE:
add_device.php <hostname> [community] [v1|v2c] [port]
[udp|udp6|tcp|tcp6]
add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des]
[port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________
observium mailing list
observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Still wrong if you are using the config you pasted...
To what is localhost linked? 127.0.0.1 or the actual ip address? Is snmpd running on the 'localhost' ip address?
On 2013-10-21 11:24, Gokul Kannan wrote:
No. I double checked it. Using just "observium" as my community string now. Still same old error message.
Thanks, Gokul
On Monday, 21 October 2013 2:18 PM, Stefano Cordio stefano.cordio@gmail.com wrote:
As Adam said, look at the community string! Cheers, Stefano Il 21/ott/2013 10:33 "Gokul Kannan" gokul_ps@yahoo.com ha scritto:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Issue resolved after changing the .conf file as in the following discussion page-2.
Thanks everyone.
http://forums.knownhost.com/threads/installing-observium.2542/
Thanks, Gokul
On Monday, 21 October 2013 3:03 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
No. I double checked it. Using just "observium" as my community string now. Still same old error message.
Thanks, Gokul
On Monday, 21 October 2013 2:18 PM, Stefano Cordio stefano.cordio@gmail.com wrote:
As Adam said, look at the community string! Cheers, Stefano Il 21/ott/2013 10:33 "Gokul Kannan" gokul_ps@yahoo.com ha scritto:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the
problem
is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE:
add_device.php <hostname> [community] [v1|v2c] [port]
[udp|udp6|tcp|tcp6]
add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des]
[port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul _______________________________________________
observium mailing list
observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Why do you paste different things in email than what you are actually using? Is it intended to confuse people trying to help?
It sounds like you are better off looking for net-snmp support instead of Observium support.
Tom
On 10/21/2013 11:24 AM, Gokul Kannan wrote:
No. I double checked it. Using just "observium" as my community string now. Still same old error message.
Thanks, Gokul
On Monday, 21 October 2013 2:18 PM, Stefano Cordio stefano.cordio@gmail.com wrote: As Adam said, look at the community string! Cheers, Stefano Il 21/ott/2013 10:33 "Gokul Kannan" <gokul_ps@yahoo.com mailto:gokul_ps@yahoo.com> ha scritto:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials. Thanks, Gokul On Monday, 21 October 2013 12:33 PM, Gokul Kannan <gokul_ps@yahoo.com <mailto:gokul_ps@yahoo.com>> wrote: What does that mean? Am i doing something wrong? Thanks, Gokul On Sunday, 20 October 2013 10:00 PM, Adam Armstrong <adama@memetic.org <mailto:adama@memetic.org>> wrote: 0 != O adam. On 2013-10-20 17:06, Gokul Kannan wrote: > Hi All, > > For some reason, I couldn't add localhost itself. I guess the problem > is with SNMP. > > Please find the error messages and logs below. Would be great if > anyone could help. > > [root@server <mailto:root@server> observium]# ./add_device.php localhost Obs3rv1um v2c > Trying v2c community Obs3rv1um ... > No reply on community Obs3rv1um using v2c > Could not reach localhost with given SNMP community using v2c > Trying v2c community Obs3rv1um ... > No reply on community Obs3rv1um using v2c > Could not reach localhost with given SNMP community using v2c > Observium v0.13.10.4585 > Add Device > > USAGE: > add_device.php <hostname> [community] [v1|v2c] [port] > [udp|udp6|tcp|tcp6] > add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] > [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] > > EXAMPLE: > SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] > [udp|udp6|tcp|tcp6] > SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] > [udp|udp6|tcp|tcp6] > No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] > [udp|udp6|tcp|tcp6] > Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> > [md5|sha] [port] [udp|udp6|tcp|tcp6] > Auth, Priv : add_device.php <hostname> ap v3 <user> <password> > <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] > > Remember to run discovery for the device afterwards. > > This is my _/ETC/SYSCONFIG/SNMPD_ file > > # snmpd command line options > OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a" > > This is my _/ETC/SNMP/SNMPD.CONF_ file > > com2sec readonly default 0bs3rv1um > > group MyROGroup v2c readonly > view all included .1 80 > access MyROGroup "" any noauth exact all none none > > syslocation Rack, Room, Building, City, Country [GPSX,Y] > syscontact Your Name <your@email.address <mailto:your@email.address>> > > #Distro Detection > extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro > ~ > ~ > > Whenever I do "SERVICE SNMPD RESTART", I can see the following error > message in _/VAR/LOG/MESSAGES_ > > Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... > shutting down... > Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5 > > Appreciate your time and assistance. > > Thanks, > Gokul > _______________________________________________ > observium mailing list > observium@observium.org <mailto:observium@observium.org> > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Tom,
Apologies. Will be careful from next time. Thanks for all your comments.
Thanks, Gokul
On Monday, 21 October 2013 3:26 PM, Tom Laermans tom.laermans@powersource.cx wrote:
Why do you paste different things in email than what you are actually using? Is it intended to confuse people trying to help?
It sounds like you are better off looking for net-snmp support instead of Observium support.
Tom
On 10/21/2013 11:24 AM, Gokul Kannan wrote:
No. I double checked it. Using just "observium" as my community string now. Still same old error message.
Thanks, Gokul
On Monday, 21 October 2013 2:18 PM, Stefano Cordio stefano.cordio@gmail.com wrote:
As Adam said, look at the community string! Cheers, Stefano Il 21/ott/2013 10:33 "Gokul Kannan" gokul_ps@yahoo.com ha scritto:
I understand that the snmp log messages are pretty clear where it restarts (stops and starts). But still when i try to add it from Observium, it gives the error saying it couldn't reach device with given credentials.
Thanks, Gokul
On Monday, 21 October 2013 12:33 PM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote:
0 != O
adam.
On 2013-10-20
17:06, Gokul Kannan wrote:
Hi All,
For some
reason, I couldn’t add localhost itself. I guess the problem
is with SNMP.
Please find
the error messages and logs below. Would be great if
anyone could
help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c
community Obs3rv1um ...
No reply on
community Obs3rv1um using v2c
Could not
reach localhost with given SNMP community using v2c
Trying v2c
community Obs3rv1um ...
No reply on
community Obs3rv1um using v2c
Could not
reach localhost with given SNMP community using v2c
Observium
v0.13.10.4585
Add Device
USAGE:
add_device.php <hostname> [community] [v1|v2c] [port]
[udp|udp6|tcp|tcp6]
add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password]
[enckey]
[md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c:
add_device.php <hostname> [community] [v1|v2c] [port]
[udp|udp6|tcp|tcp6]
SNMPv3 :
Defaults : add_device.php <hostname> any v3 [user] [port]
[udp|udp6|tcp|tcp6]
No Auth, No
Priv : add_device.php <hostname> nanp v3 [user] [port]
[udp|udp6|tcp|tcp6]
Auth, No Priv
: add_device.php <hostname> anp v3 <user> <password>
[md5|sha]
[port] [udp|udp6|tcp|tcp6]
Auth, Priv :
add_device.php <hostname> ap v3 <user> <password>
<enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to
run discovery for the device afterwards.
This is my
_/ETC/SYSCONFIG/SNMPD_ file
# snmpd
command line options
OPTIONS="-Lsd
-Lf /dev/null -p /var/run/snmpd.pid -a"
This is my
_/ETC/SNMP/SNMPD.CONF_ file
com2sec
readonly default 0bs3rv1um
group
MyROGroup v2c readonly
view all
included .1 80
access
MyROGroup "" any noauth exact all none none
syslocation
Rack, Room, Building, City, Country [GPSX,Y]
syscontact
Your Name your@email.address
#Distro
Detection
extend
.1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro
~ ~
Whenever I do
“SERVICE SNMPD RESTART”, I can see the following error
message in
_/VAR/LOG/MESSAGES_
Oct 20
14:09:47 server snmpd[10038]: Received TERM or STOP signal...
shutting
down...
Oct 20
14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate
your time and assistance.
Thanks, Gokul
_______________________________________________
observium
mailing list
observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Looks like you're using a zero instead of a O in Obs3rv1um in your snmpd.conf file.
On 21 Oct 2013, at 8:59 AM, Gokul Kannan gokul_ps@yahoo.com wrote:
What does that mean? Am i doing something wrong?
Thanks, Gokul
On Sunday, 20 October 2013 10:00 PM, Adam Armstrong adama@memetic.org wrote: 0 != O
adam.
On 2013-10-20 17:06, Gokul Kannan wrote:
Hi All,
For some reason, I couldn’t add localhost itself. I guess the problem is with SNMP.
Please find the error messages and logs below. Would be great if anyone could help.
[root@server observium]# ./add_device.php localhost Obs3rv1um v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Trying v2c community Obs3rv1um ... No reply on community Obs3rv1um using v2c Could not reach localhost with given SNMP community using v2c Observium v0.13.10.4585 Add Device
USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6]
Remember to run discovery for the device afterwards.
This is my _/ETC/SYSCONFIG/SNMPD_ file
# snmpd command line options OPTIONS="-Lsd -Lf /dev/null -p /var/run/snmpd.pid -a"
This is my _/ETC/SNMP/SNMPD.CONF_ file
com2sec readonly default 0bs3rv1um
group MyROGroup v2c readonly view all included .1 80 access MyROGroup "" any noauth exact all none none
syslocation Rack, Room, Building, City, Country [GPSX,Y] syscontact Your Name your@email.address
#Distro Detection extend .1.3.6.1.4.1.2021.7890.1 distro /usr/bin/distro ~ ~
Whenever I do “SERVICE SNMPD RESTART”, I can see the following error message in _/VAR/LOG/MESSAGES_
Oct 20 14:09:47 server snmpd[10038]: Received TERM or STOP signal... shutting down... Oct 20 14:09:47 server snmpd[10055]: NET-SNMP version 5.5
Appreciate your time and assistance.
Thanks, Gokul
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (6)
-
Adam Armstrong -
Frank Ortmann -
Gokul Kannan -
Laurens Vets -
Stefano Cordio -
Tom Laermans