We have a page for each 'type' of sensor, which is part of the 'health' page.

I suppose we could link to health :)

adam.

On 2014-02-07 07:13, Adriaan Smuts wrote:

Damn, sorry Tom, didn't realize that there isn't a sensors page. Would it be possible to create one or is this something that still needs to be implemented?

Regards

ADRIAAN SMUTS

SYSTEMS ADMINISTRATOR

---

Direct Line

+27 21 464 9565

Reception

086 000 9500

Website

WWW.WEBAFRICA.CO.ZA [4]

FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: Friday, February 7, 2014 2:31 PM TO: Observium Network Observation System SUBJECT: Re: [Observium] Observium Home Page - Sensors

What page would you prefer to go to? There is no "sensors" page.

Tom

On 07/02/2014 12:49, Adriaan Smuts wrote:

Hi Guys,

Can someone please fix the links on the sensors section of the home page (please see below or attached).

If you click on ports/devices under Down it takes you to the down devices or ports, but on sensors it just takes you to the health page.

Example: http://observium.domain.com/devices/status=0/ [2] (Devices down link)

Example: http://observium.domain.com/health/ [3] (Sensors down link)

I hope the above makes sense… J

PS: Our sensors are on Dell/SuperMicro IPMI devices.

Regards

ADRIAAN SMUTS

SYSTEMS ADMINISTRATOR

---

Direct Line

+27 21 464 9565

Reception

086 000 9500

Website

WWW.WEBAFRICA.CO.ZA [4]

---

observium mailing list

observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]

Links:

[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] http://observium.domain.com/devices/status=0/ [3] http://observium.domain.com/health/ [4] http://www.webafrica.co.za/

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

It would be helpful if we could link to a filtered "Alerted Sensors" page similar to the way the Devices and Ports sections have their filtered state views. It would probably have to be a simplified view since the various sensors all have different data fields, but just having a quick glance view with the device name, sensor type, and sensor name would be enough. -- Cameron Moore Manager of Systems & Networks Hardin-Simmons University, Technology Services Ph: (325) 670-1506 Fx: (325) 670-1570

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Friday, February 07, 2014 6:31 AM To: Observium Network Observation System Subject: Re: [Observium] Observium Home Page - Sensors

What page would you prefer to go to? There is no "sensors" page.

Tom

On 07/02/2014 12:49, Adriaan Smuts wrote: Hi Guys,

Can someone please fix the links on the sensors section of the home page (please see below or attached).

[cid:image001.png@01CF2642.DA7E96E0]

If you click on ports/devices under Down it takes you to the down devices or ports, but on sensors it just takes you to the health page.

Example: http://observium.domain.com/devices/status=0/ (Devices down link) Example: http://observium.domain.com/health/ (Sensors down link)

I hope the above makes sense... :)

PS: Our sensors are on Dell/SuperMicro IPMI devices.

Regards

Adriaan Smuts

Systems Administrator

[Web Africa]

________________________________

Direct Line

+27 21 464 9565

Reception

086 000 9500

Website

www.webafrica.co.zahttp://www.webafrica.co.za/

_______________________________________________

observium mailing list

observium@observium.orgmailto:observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Alerting should just create events. Then we display open events. done/done :)

On 11/02/2014 05:42, Adam Armstrong wrote:

Hrm. This would involve some table reading in a way we don't currently do.

We'd have to go through the alerts table picking out sensor_ids for sensors which weren't up and then pull the sensor entries for those. I'm not sure how slow/fast it'd load.

I'll have a look.

adam.

On 2014-02-10 10:03, Moore, Cameron wrote:

...

It would be helpful if we could link to a filtered "Alerted Sensors" page similar to the way the Devices and Ports sections have their filtered state views. It would probably have to be a simplified view since the various sensors all have different data fields, but just having a quick glance view with the device name, sensor type, and sensor name would be enough.

--

Cameron Moore

Manager of Systems & Networks

Hardin-Simmons University, Technology Services

Ph: (325) 670-1506 Fx: (325) 670-1570

FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: Friday, February 07, 2014 6:31 AM TO: Observium Network Observation System SUBJECT: Re: [Observium] Observium Home Page - Sensors

What page would you prefer to go to? There is no "sensors" page.

Tom

On 07/02/2014 12:49, Adriaan Smuts wrote:

Hi Guys,

Can someone please fix the links on the sensors section of the home page (please see below or attached).

If you click on ports/devices under Down it takes you to the down devices or ports, but on sensors it just takes you to the health page.

Example: http://observium.domain.com/devices/status=0/ [2] (Devices down link)

Example: http://observium.domain.com/health/ [3] (Sensors down link)

I hope the above makes sense… J

PS: Our sensors are on Dell/SuperMicro IPMI devices.

Regards

ADRIAAN SMUTS

SYSTEMS ADMINISTRATOR

---

Direct Line

+27 21 464 9565

Reception

086 000 9500

Website

WWW.WEBAFRICA.CO.ZA [4]

---

observium mailing list

observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]

Links:

[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] http://observium.domain.com/devices/status=0/ [3] http://observium.domain.com/health/ [4] http://www.webafrica.co.za/

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Well, yea, that's kind of what i mean. I think. ;-)

On 02/11/2014 10:20 AM, Adam Armstrong wrote:

Well, that table would get very, very large, it would be identical (and quicker) to show the alert_entry contents :P

If you've not already looked, all alert test / entity pairs are individually given an alert_entry table row, and that's where you find the status of everything.

SELECT * FROM `alert_entries` WHERE status != '1';

adam.

On 2014-02-11 02:21, Tom Laermans wrote:

...

Alerting should just create events. Then we display open events. done/done :)

On 11/02/2014 05:42, Adam Armstrong wrote:

Hrm. This would involve some table reading in a way we don't currently do.

We'd have to go through the alerts table picking out sensor_ids for sensors which weren't up and then pull the sensor entries for those. I'm not sure how slow/fast it'd load.

I'll have a look.

adam.

On 2014-02-10 10:03, Moore, Cameron wrote: It would be helpful if we could link to a filtered "Alerted Sensors" page similar to the way the Devices and Ports sections have their filtered state views. It would probably have to be a simplified view since the various sensors all have different data fields, but just having a quick glance view with the device name, sensor type, and sensor name would be enough.

-- Cameron Moore

Manager of Systems & Networks

Hardin-Simmons University, Technology Services

Ph: (325) 670-1506 Fx: (325) 670-1570

FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: Friday, February 07, 2014 6:31 AM TO: Observium Network Observation System SUBJECT: Re: [Observium] Observium Home Page - Sensors

What page would you prefer to go to? There is no "sensors" page.

Tom

On 07/02/2014 12:49, Adriaan Smuts wrote:

Hi Guys,

Can someone please fix the links on the sensors section of the home page (please see below or attached).

If you click on ports/devices under Down it takes you to the down devices or ports, but on sensors it just takes you to the health page.

Example: http://observium.domain.com/devices/status=0/ [2] (Devices down link)

Example: http://observium.domain.com/health/ [3] (Sensors down link)

I hope the above makes sense… J

PS: Our sensors are on Dell/SuperMicro IPMI devices.

Regards

ADRIAAN SMUTS

SYSTEMS ADMINISTRATOR

---

Direct Line

+27 21 464 9565

Reception

086 000 9500

Website

WWW.WEBAFRICA.CO.ZA [4]

---

observium mailing list

observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]

Links:

[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] http://observium.domain.com/devices/status=0/ [3] http://observium.domain.com/health/ [4] http://www.webafrica.co.za/

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Sure, but that "alerted sensors" style will probably go away as soon as it fits nicely into the new alerting system.... hopefully.

On 02/12/2014 05:19 PM, Moore, Cameron wrote:

Are we talking about two different things here? I'm not referring the Alerts capabilities but to the state of Sensors (up, alert, ignored, disabled). I only said "Alerted Sensors" because that's how the first summary table displays them[1] (which may get confusing in the future). I poked around in the database the other day and thought everything was already there in the sensors and sensors-state tables.

[1] http://fisheye.observium.org/browse/Observium/html/includes/status-summary.i...

Cameron Moore

-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Tuesday, February 11, 2014 4:09 AM To: Observium Network Observation System Subject: Re: [Observium] Observium Home Page - Sensors

Well, yea, that's kind of what i mean. I think. ;-)

On 02/11/2014 10:20 AM, Adam Armstrong wrote:

...

Well, that table would get very, very large, it would be identical (and quicker) to show the alert_entry contents :P

If you've not already looked, all alert test / entity pairs are individually given an alert_entry table row, and that's where you find the status of everything.

SELECT * FROM `alert_entries` WHERE status != '1';

adam.

On 2014-02-11 02:21, Tom Laermans wrote:

...

Alerting should just create events. Then we display open events. done/done :)

On 11/02/2014 05:42, Adam Armstrong wrote:

Hrm. This would involve some table reading in a way we don't currently do.

We'd have to go through the alerts table picking out sensor_ids for sensors which weren't up and then pull the sensor entries for those. I'm not sure how slow/fast it'd load.

I'll have a look.

adam.

On 2014-02-10 10:03, Moore, Cameron wrote: It would be helpful if we could link to a filtered "Alerted Sensors" page similar to the way the Devices and Ports sections have their filtered state views. It would probably have to be a simplified view since the various sensors all have different data fields, but just having a quick glance view with the device name, sensor type, and sensor name would be enough.

-- Cameron Moore

Manager of Systems & Networks

Hardin-Simmons University, Technology Services

Ph: (325) 670-1506 Fx: (325) 670-1570

FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: Friday, February 07, 2014 6:31 AM TO: Observium Network Observation System SUBJECT: Re: [Observium] Observium Home Page - Sensors

What page would you prefer to go to? There is no "sensors" page.

Tom

On 07/02/2014 12:49, Adriaan Smuts wrote:

Hi Guys,

Can someone please fix the links on the sensors section of the home page (please see below or attached).

If you click on ports/devices under Down it takes you to the down devices or ports, but on sensors it just takes you to the health page.

Example: http://observium.domain.com/devices/status=0/ [2] (Devices down link)

Example: http://observium.domain.com/health/ [3] (Sensors down link)

I hope the above makes sense… J

PS: Our sensors are on Dell/SuperMicro IPMI devices.

Regards

ADRIAAN SMUTS

SYSTEMS ADMINISTRATOR

---

Direct Line

+27 21 464 9565

Reception

086 000 9500

Website

WWW.WEBAFRICA.CO.ZA [4]

---

observium mailing list

observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]

Links:

[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] http://observium.domain.com/devices/status=0/ [3] http://observium.domain.com/health/ [4] http://www.webafrica.co.za/

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium