Gents, I’m trying to trigger an event based upon availability in the ”load balancer” section, trying to find a variable in the device data that I can trigger on.
Basically I want to trigger if a Virtual Server is down, or if the HA status change. All that is visible in the GUI but not sure if I can create a trigger for it in the Alarm section, possible?
//Anders
On Mon, Feb 01, 2016 at 06:25:43PM +0000, Anders Johansson wrote:
Gents, I’m trying to trigger an event based upon availability in the ”load balancer” section, trying to find a variable in the device data that I can trigger on.
Basically I want to trigger if a Virtual Server is down, or if the HA status change. All that is visible in the GUI but not sure if I can create a trigger for it in the Alarm section, possible?
//Anders
Here is how I monitor the global HA status on my active/passive F5 HA pairs, as well as config sync status, and fan/power supply monitoing:
<?xml version="1.0"?> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d3bc6f1d1e3d244750b0c1c45ece0fbc"> <entity_type>status</entity_type> <name>power status</name> <message>There is a bad power status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq power</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d748cc6e86c925e60ca3d5911a9dd8d5"> <entity_type>status</entity_type> <name>fan status</name> <message>There is a bad fan status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq fan</entity> </associations> </template> <templates> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="7154c04abc307124fa95e71e38498be9"> <entity_type>status</entity_type> <name>f5 config sync</name> <message>F5 needs config sync after 30 minutes.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>6</delay> <conditions_and>1</conditions_and> <conditions>status_event ne ok</conditions> <conditions_complex>status_event ne ok</conditions_complex> <associations> <device>os eq f5</device> <entity>status_type eq f5-config-sync-state</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="719947d9455ef2e78deae669019673c7"> <entity_type>status</entity_type> <name>f5 unit 1 not active ha.</name> <message>This F5 unit 1 in its HA pair is not active.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_name ne active</conditions> <conditions_complex>status_name ne active</conditions_complex> <associations> <device>os eq f5</device> <device>hostname match slb?-1.*</device> <entity>status_type eq f5-ha-state</entity> </associations> </template> </templates>
Holy shit, this us the first time I've ever seen the export thing used.
At some point we should write the import part...
Adam.
Sent from BlueMail
On Feb 1, 2016, 22:43, at 22:43, Nick Schmalenberger nick@schmalenberger.us wrote:
On Mon, Feb 01, 2016 at 06:25:43PM +0000, Anders Johansson wrote:
Gents, I’m trying to trigger an event based upon availability in the ”load
balancer” section, trying to find a variable in the device data that I can trigger on.
Basically I want to trigger if a Virtual Server is down, or if the HA
status change. All that is visible in the GUI but not sure if I can create a trigger for it in the Alarm section, possible?
//Anders
Here is how I monitor the global HA status on my active/passive F5 HA pairs, as well as config sync status, and fan/power supply monitoing:
<?xml version="1.0"?>
<template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d3bc6f1d1e3d244750b0c1c45ece0fbc"> <entity_type>status</entity_type> <name>power status</name> <message>There is a bad power status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex>
<associations> <device>*</device> <entity>entPhysicalClass eq power</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d748cc6e86c925e60ca3d5911a9dd8d5"> <entity_type>status</entity_type> <name>fan status</name> <message>There is a bad fan status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq fan</entity> </associations> </template> <templates> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="7154c04abc307124fa95e71e38498be9"> <entity_type>status</entity_type> <name>f5 config sync</name> <message>F5 needs config sync after 30 minutes.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>6</delay> <conditions_and>1</conditions_and> <conditions>status_event ne ok</conditions> <conditions_complex>status_event ne ok</conditions_complex> <associations> <device>os eq f5</device> <entity>status_type eq f5-config-sync-state</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="719947d9455ef2e78deae669019673c7"> <entity_type>status</entity_type> <name>f5 unit 1 not active ha.</name> <message>This F5 unit 1 in its HA pair is not active.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_name ne active</conditions> <conditions_complex>status_name ne active</conditions_complex> <associations> <device>os eq f5</device> <device>hostname match slb?-1.*</device> <entity>status_type eq f5-ha-state</entity> </associations> </template> </templates> _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
+1! Thanks for the alert config below.
I’d like to monitor not only the virtual servers, but the poolmembers for loadbalancing as well… Would be very useful for us.
Met vriendelijke groet, kind regards,
Erwin Heringa Netwerkbeheerder
[Signature-SIDN]https://www.sidn.nl/
SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM T +31 (0)26 352 55 00 | +31 (0)6 11608489 erwin.heringa@sidn.nlmailto:erwin.heringa@sidn.nl | www.sidn.nlhttp://www.sidn.nl/
[View Erwin Heringa's profile on LinkedIn]https://www.linkedin.com/in/netwerkmanager
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: dinsdag 2 februari 2016 0:23 To: Observium Network Observation System Subject: Re: [Observium] f5 BIG-IP Alarm
Holy shit, this us the first time I've ever seen the export thing used.
At some point we should write the import part...
Adam.
Sent from BlueMailhttp://www.bluemail.me/r On Feb 1, 2016, at 22:43, Nick Schmalenberger <nick@schmalenberger.usmailto:nick@schmalenberger.us> wrote:
On Mon, Feb 01, 2016 at 06:25:43PM +0000, Anders Johansson wrote:
Gents, I’m trying to trigger an event based upon availability in the ”load balancer” section, trying to find a variable in the device data that I can trigger on.
Basically I want to trigger if a Virtual Server is down, or if the HA status change. All that is visible in the GUI but not sure if I can create a trigger for it in the Alarm section, possible?
//Anders
Here is how I monitor the global HA status on my active/passive F5 HA pairs, as well as config sync status, and fan/power supply monitoing:
<?xml version="1.0"?> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535"
id="d3bc6f1d1e3d244750b0c1c45ece0fbc"> <entity_type>status</entity_type> <name>power status</name> <message>There is a bad power status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq power</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d748cc6e86c925e60ca3d5911a9dd8d5"> <entity_type>status</entity_type>
<name>fan status</name> <message>There is a bad fan status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq fan</entity> </associations> </template> <templates> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="7154c04abc307124fa95e71e38498be9"> <entity_type>status</entity_type> <name>f5 config sync</name> <message>F5 needs config sync after
30 minutes.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>6</delay> <conditions_and>1</conditions_and> <conditions>status_event ne ok</conditions> <conditions_complex>status_event ne ok</conditions_complex> <associations> <device>os eq f5</device> <entity>status_type eq f5-config-sync-state</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="719947d9455ef2e78deae669019673c7"> <entity_type>status</entity_type> <name>f5 unit 1 not active ha.</name> <message>This F5 unit 1 in its HA pair is not active.</message>
<severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_name ne active</conditions> <conditions_complex>status_name ne active</conditions_complex> <associations> <device>os eq f5</device> <device>hostname match slb?-1.*</device> <entity>status_type eq f5-ha-state</entity> </associations> </template> </templates>
________________________________
observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
This will be added in a future version :>
adam. On 02/02/2016 06:40:22, Erwin Heringa erwin.heringa@sidn.nl wrote: +1! Thanks for the alert config below. I’d like to monitor not only the virtual servers, but the poolmembers for loadbalancing as well… Would be very useful for us. Met vriendelijke groet, kind regards,
Erwin Heringa Netwerkbeheerder [Signature-SIDN] [https://www.sidn.nl/]
SIDN | Meander 501 | 6825 MD | Postbus 5022 | 6802 EA | ARNHEM T +31 (0)26 352 55 00 | +31 (0)6 11608489 erwin.heringa@sidn.nl [mailto:erwin.heringa@sidn.nl] | www.sidn.nl [http://www.sidn.nl/] [View Erwin Heringa's profile on LinkedIn] [https://www.linkedin.com/in/netwerkmanager] From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: dinsdag 2 februari 2016 0:23 To: Observium Network Observation System Subject: Re: [Observium] f5 BIG-IP Alarm Holy shit, this us the first time I've ever seen the export thing used. At some point we should write the import part... Adam. Sent from BlueMail [http://www.bluemail.me/r] On Feb 1, 2016, at 22:43, Nick Schmalenberger <nick@schmalenberger.us [mailto:nick@schmalenberger.us]> wrote: On Mon, Feb 01, 2016 at 06:25:43PM +0000, Anders Johansson wrote: Gents, I’m trying to trigger an event based upon availability in the ”load balancer” section, trying to find a variable in the device data that I can trigger on.
Basically I want to trigger if a Virtual Server is down, or if the HA status change. All that is visible in the GUI but not sure if I can create a trigger for it in the Alarm section, possible?
//Anders
Here is how I monitor the global HA status on my active/passive F5 HA pairs, as well as config sync status, and fan/power supply monitoing:
<?xml version="1.0"?> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d3bc6f1d1e3d244750b0c1c45ece0fbc"> <entity_type>status</entity_type> <name>power status</name> <message>There is a bad power status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq power</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="d748cc6e86c925e60ca3d5911a9dd8d5"> <entity_type>status</entity_type> <name>fan status</name> <message>There is a bad fan status.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_event eq alert</conditions> <conditions_complex>status_event eq alert</conditions_complex> <associations> <device>*</device> <entity>entPhysicalClass eq fan</entity> </associations> </template> <templates> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="7154c04abc307124fa95e71e38498be9"> <entity_type>status</entity_type> <name>f5 config sync</name> <message>F5 needs config sync after 30 minutes.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>6</delay> <conditions_and>1</conditions_and> <conditions>status_event ne ok</conditions> <conditions_complex>status_event ne ok</conditions_complex> <associations> <device>os eq f5</device> <entity>status_type eq f5-config-sync-state</entity> </associations> </template> <template type="alert" description="Autogenerated observium template" version="0.91" created="Mon, 01 Feb 2016 22:39:07 +0000" observium="0.16.1.7535" id="719947d9455ef2e78deae669019673c7"> <entity_type>status</entity_type> <name>f5 unit 1 not active ha.</name> <message>This F5 unit 1 in its HA pair is not active.</message> <severity>crit</severity> <suppress_recovery>0</suppress_recovery> <delay>0</delay> <conditions_and>1</conditions_and> <conditions>status_name ne active</conditions> <conditions_complex>status_name ne active</conditions_complex> <associations> <device>os eq f5</device> <device>hostname match slb?-1.*</device> <entity>status_type eq f5-ha-state</entity> </associations> </template> </templates>
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
participants (4)
-
Adam Armstrong -
Anders Johansson -
Erwin Heringa -
Nick Schmalenberger