Error during polling: ERROR: unknown option 's'
![](https://secure.gravatar.com/avatar/677b7928275d49c203a3a7a80fb200fb.jpg?s=120&d=mm&r=g)
Have any of you run into this before? I'm running centos 6.4.
ERROR: unknown option 's' ERROR: unknown option 's' ERROR: unknown option 's' Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (4488767 seconds) ERROR: unknown option 's' Uptime: 51 days, 22h 52m 47s Module time: 5.0179s Hardware: cisco2811 Version: 15.1(4)M6 Features: ADVSECURITYK9 Serial: Asset: Module time: 1.0249sIPMI: Module time: 0.0087sSensors: Checking (snmp) temperature chassis ERROR: unknown option 's' 26 C
Checking alerts Module time: 1.0116sProcessor Processor 1 ERROR: unknown option 's' 1%
Checking alerts Module time: 1.025sMempool Processor: 25.95% ERROR: unknown option 's'
Checking alerts
Mempool I/O: 60.08% ERROR: unknown option 's'
Checking alerts
Mempool 2811 chassis - Processor: 25.95% ERROR: unknown option 's'
Checking alerts
Mempool 2811 chassis - I/O: 60.08% ERROR: unknown option 's'
Checking alerts
Module time: 8.8415sModule time: 0.0025sPolling Netstats: IPERROR: unknown option 's' TCPERROR: unknown option 's' UDPERROR: unknown option 's' ICMPERROR: unknown option 's' SNMPERROR: unknown option 's'
![](https://secure.gravatar.com/avatar/0fa97865a0e1ab36152b6b2299eedb49.jpg?s=120&d=mm&r=g)
I've seen it before, but I don't remember what it is.
It'll be pretty obvious if you run the poller in debug mode so you can see the commands being run, though.
adam.
On 2013-10-14 20:20, Jeremy Custenborder wrote:
Have any of you run into this before? I'm running centos 6.4.
ERROR: unknown option 's' ERROR: unknown option 's' ERROR: unknown option 's' Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (4488767 seconds) ERROR: unknown option 's' Uptime: 51 days, 22h 52m 47s Module time: 5.0179s Hardware: cisco2811 Version: 15.1(4)M6 Features: ADVSECURITYK9 Serial: Asset: Module time: 1.0249sIPMI: Module time: 0.0087sSensors: Checking (snmp) temperature chassis ERROR: unknown option 's' 26 C
Checking alerts Module time: 1.0116sProcessor Processor 1 ERROR: unknown option 's' 1%
Checking alerts Module time: 1.025sMempool Processor: 25.95% ERROR: unknown option 's'
Checking alerts
Mempool I/O: 60.08% ERROR: unknown option 's'
Checking alerts
Mempool 2811 chassis - Processor: 25.95% ERROR: unknown option 's'
Checking alerts
Mempool 2811 chassis - I/O: 60.08% ERROR: unknown option 's'
Checking alerts
Module time: 8.8415sModule time: 0.0025sPolling Netstats: IPERROR: unknown option 's' TCPERROR: unknown option 's' UDPERROR: unknown option 's' ICMPERROR: unknown option 's' SNMPERROR: unknown option 's' _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
![](https://secure.gravatar.com/avatar/677b7928275d49c203a3a7a80fb200fb.jpg?s=120&d=mm&r=g)
Yea I found it a minute ago. We pulled up to a version from last week. It was --step in the rrdtool call was not getting a value. I updated to the latest and it went away
On Mon, Oct 14, 2013 at 12:22 PM, Adam Armstrong adama@memetic.org wrote:
I've seen it before, but I don't remember what it is.
It'll be pretty obvious if you run the poller in debug mode so you can see the commands being run, though.
adam.
On 2013-10-14 20:20, Jeremy Custenborder wrote:
Have any of you run into this before? I'm running centos 6.4.
ERROR: unknown option 's' ERROR: unknown option 's' ERROR: unknown option 's' Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (4488767 seconds) ERROR: unknown option 's' Uptime: 51 days, 22h 52m 47s Module time: 5.0179s Hardware: cisco2811 Version: 15.1(4)M6 Features: ADVSECURITYK9 Serial: Asset: Module time: 1.0249sIPMI: Module time: 0.0087sSensors: Checking (snmp) temperature chassis ERROR: unknown option 's' 26 C
Checking alerts Module time: 1.0116sProcessor Processor 1 ERROR: unknown option 's' 1%
Checking alerts Module time: 1.025sMempool Processor: 25.95% ERROR: unknown option 's'
Checking alerts
Mempool I/O: 60.08% ERROR: unknown option 's'
Checking alerts
Mempool 2811 chassis - Processor: 25.95% ERROR: unknown option 's'
Checking alerts
Mempool 2811 chassis - I/O: 60.08% ERROR: unknown option 's'
Checking alerts
Module time: 8.8415sModule time: 0.0025sPolling Netstats: IPERROR: unknown option 's' TCPERROR: unknown option 's' UDPERROR: unknown option 's' ICMPERROR: unknown option 's' SNMPERROR: unknown option 's' _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (2)
-
Adam Armstrong
-
Jeremy Custenborder