6224 , 6224F , 6248 , 6248F

[]s!

-- Guilherme de Freitas Figueiredo

On Tue, Feb 18, 2014 at 4:53 PM, Josh Hopper joshhopper@protectplus.comwrote:

What PowerConnect Model?

--

Sincerely,

Joshua Hopper, A+ CE

*Network Administrator*

[image: http://www.protectplus.com/images/ppluslogo.jpg]

        420 3rd Ave NW Hickory NC 28601

Office: 828-449-1839x2160 | Cell: 828-855-7565

*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Guilherme de Freitas Figueiredo *Sent:* Tuesday, February 18, 2014 1:48 PM *To:* Observium Network Observation System *Subject:* [Observium] Alert Checker if SNMP oid | Dell Power

Hi!

there is some form to create some alert using a specifc SNMP oid? I say this because I'm trying to create an alert for a Dell switch in which it alarms if one of the sources of power is turned off, the SNMP oid is the SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 already in observium envMonSupplyState.11 is apparently the same has to be greater than 1, so I already tried the following:

envMonSupplyState.11 gt 1

and

SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 gt 1

[]s!

-- Guilherme de Freitas Figueiredo

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

The sensor is present on the device, i want to make a alert for this option:

[image: Inline image 1]

This is a sensor propriets of a dell powerconnect 6224 if this sensor is greater than 1 start the alert.

[]s!

-- Guilherme de Freitas Figueiredo

On Tue, Feb 18, 2014 at 5:47 PM, Adam Armstrong adama@memetic.org wrote:

Is that sensor present in the interface? You need to create an alert check which matches the states on the sensor, you can't reference an OID directly.

I'm not sure what the value returned for state sensors is.

adam.

On 2014-02-18 12:47, Guilherme de Freitas Figueiredo wrote:

...

Hi!

there is some form to create some alert using a specifc SNMP oid? I say this because I'm trying to create an alert for a Dell switch in which it alarms if one of the sources of power is turned off, the SNMP oid is the SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 already in observium envMonSupplyState.11 is apparently the same has to be greater than 1, so I already tried the following:

envMonSupplyState.11 gt 1

and

SNMPv2-SMI :: enterprises.674.10895.3000.1.2.110.7.2.1.3.11 gt 1

[]s!

-- Guilherme de Freitas Figueiredo _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium