PS. Cisco notes on SNMP monitoring the 9800 WLC can be found here: https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wir...

On Wed, 14 Dec 2022 at 16:43, Storer, Darren darren.storer@gmail.com wrote:

Hi Adam,

For the 9800 WLC, I see:

sysObjectID .1.3.6.1.4.1.9.1.2530 sysDescr Cisco IOS Software [Cupertino], C9800 Software (C9800_IOSXE-K9), Version 17.9.2, RELEASE SOFTWARE (fc2)

The recent Catalyst 9136 series access points also support air quality monitoring - please let me know what you need (walk data etc.) to display the environmental data - it would be very useful.

Thanks again

Darren

On Thu, 1 Dec 2022 at 23:43, Adam Armstrong via observium < observium@lists.observium.org> wrote:

...

I vaguely recall something about this recently, the 9800 is an IOS device that reports as IOS, rather than running the older WLC OS?

I can't remember the reason for the complexity, I think we just need to look at the ability to allow IOS devices to poll the old WLC MIBs, though obviously not globally as 99.9% of IOS doesn't do wifi.

What is the sysObjectID and sysDescr of this device?

adam.

andri--- via observium observium@lists.observium.org 30 November 2022 08:38 Hi

Our organization recently upgraded from Cisco 5520 WLC to Cisco 9800 WLC. In observium I get really good statistics about wireless client count and wireless ap count on the 5520 but not on the 9800. I am not sure if this is something on observium side or cisco side. But I wanted to ask if anyone has the same issue and if they found a solution. Or maybe this is just something that needs to be added.

Please let me know if there is any further information I can submit.

Best regards Andri _______________________________________________ observium mailing list -- observium@lists.observium.org To unsubscribe send an email to observium-leave@lists.observium.org

-- Sent from Postbox https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach _______________________________________________ observium mailing list -- observium@lists.observium.org To unsubscribe send an email to observium-leave@lists.observium.org

How do they think you should be collecting AP status now?

adam.

Storer, Darren via observium wrote on 02/03/2023 01:35:

Sadly, Cisco told me that the old-style SNMP status for all the WAPs connected to 9800 WLC is not supported... Has anyone else had any success?

Thanks

Darren

On Wed, 14 Dec 2022 at 17:44, Storer, Darren <darren.storer@gmail.com mailto:darren.storer@gmail.com> wrote:

PS. Cisco notes on SNMP monitoring the 9800 WLC can be found here:
https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/217460-monitor-catalyst-9800-wlc-via-snmp-with.html


On Wed, 14 Dec 2022 at 16:43, Storer, Darren
<darren.storer@gmail.com <mailto:darren.storer@gmail.com>> wrote:

    Hi Adam,

    For the 9800 WLC, I see:

    sysObjectID          .1.3.6.1.4.1.9.1.2530
    sysDescr             Cisco IOS Software [Cupertino], C9800
    Software (C9800_IOSXE-K9), Version 17.9.2, RELEASE SOFTWARE (fc2)

    The recent Catalyst 9136 series access points also support air
    quality monitoring - please let me know what you need (walk
    data etc.) to display the environmental data - it would be
    very useful.

    Thanks again

    Darren


    On Thu, 1 Dec 2022 at 23:43, Adam Armstrong via observium
    <observium@lists.observium.org
    <mailto:observium@lists.observium.org>> wrote:

        I vaguely recall something about this recently, the 9800
        is an IOS device that reports as IOS, rather than running
        the older WLC OS?

        I can't remember the reason for the complexity, I think we
        just need to look at the ability to allow IOS devices to
        poll the old WLC MIBs, though obviously not globally as
        99.9% of IOS doesn't do wifi.

        What is the sysObjectID and sysDescr of this device?

        adam.

...

        andri--- via observium <mailto:observium@lists.observium.org>
        30 November 2022 08:38
        Hi

        Our organization recently upgraded from Cisco 5520 WLC to
        Cisco 9800 WLC.
        In observium I get really good statistics about wireless
        client count and wireless ap count on the 5520 but not on
        the 9800.
        I am not sure if this is something on observium side or
        cisco side.
        But I wanted to ask if anyone has the same issue and if
        they found a solution. Or maybe this is just something
        that needs to be added.

        Please let me know if there is any further information I
        can submit.

        Best regards
        Andri
        _______________________________________________
        observium mailing list -- observium@lists.observium.org
        <mailto:observium@lists.observium.org>
        To unsubscribe send an email to
        observium-leave@lists.observium.org
        <mailto:observium-leave@lists.observium.org>

        -- 
        Sent from Postbox
        <https://www.postbox-inc.com/?utm_source=email&utm_medium=siglink&utm_campaign=reach>
        _______________________________________________
        observium mailing list -- observium@lists.observium.org
        <mailto:observium@lists.observium.org>
        To unsubscribe send an email to
        observium-leave@lists.observium.org
        <mailto:observium-leave@lists.observium.org>

---

observium mailing list -- observium@lists.observium.org To unsubscribe send an email to observium-leave@lists.observium.org