Cisco ASA Reporting -nan on interface graphs.
Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Cheers
Steve
Steve Nelson 10Yr CCIE#10055, OSCP#3725 Senior Network Engineer steve.nelson@calibre-secured.net
Telephone : 0845 5576355 Direct Line : 0191 6542060 Mobile : 07702247286
Does snmpwalk report any values for if-MIB?
On 11.08.2013, at 16:26, Steve Nelson steve.nelson@calibre-secured.net wrote:
Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Cheers
Steve
Steve Nelson 10Yr CCIE#10055, OSCP#3725 Senior Network Engineer steve.nelson@calibre-secured.net
Telephone : 0845 5576355 Direct Line : 0191 6542060 Mobile : 07702247286
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
On 2013-08-11 13:26, Steve Nelson wrote:
Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Run the poller manually and see if there are any issues, or if it exits early :
./poller.php -h <hostname or device_id>
It should always end with the : "MySQL: Cell[0/0s] Row[8/0s] Rows[33/0.02s] Column[0/0s] Update[72/0.05s] Insert[2/0.02s] Delete[0/0s]" line, else something broke.
It's next to impossible for the ports poller to not work on individual devices, as it's all just IF-MIB, probably the most standard MIB around.
adam.
Hi Adam
Yes it appears to complete OK, output :
Vlan | MAC | Port (dot1d|ifIndex) | Status ------------------------------------------------------------------------------------------ Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 17.6755 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.11s] Insert[6/0.18s] Delete[0/0s]
Still the graphs show no data, which is in direct contradiction of the device itself.
Cheers
Steve
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 15:27 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
On 2013-08-11 13:26, Steve Nelson wrote:
Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Run the poller manually and see if there are any issues, or if it exits early :
./poller.php -h <hostname or device_id>
It should always end with the : "MySQL: Cell[0/0s] Row[8/0s] Rows[33/0.02s] Column[0/0s] Update[72/0.05s] Insert[2/0.02s] Delete[0/0s]" line, else something broke.
It's next to impossible for the ports poller to not work on individual devices, as it's all just IF-MIB, probably the most standard MIB around.
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Is there output from the ports poller in there?
Something like :
Port virbr0(3) HC Octets, HC UcastPkts, VLAN == bps(10.0kbps/1.97kbps)bytes(204kB/40.1kB)pk
The fact that you get NaN instead of a graph error means that it has created the RRDs.
Does the web interface show the bps/pps rates for the port in the table displays?
adam.
On 2013-08-11 16:40, Steve Nelson wrote:
Hi Adam
Yes it appears to complete OK, output :
Vlan | MAC | Port (dot1d|ifIndex) | Status
Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 17.6755 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.11s] Insert[6/0.18s] Delete[0/0s]
Still the graphs show no data, which is in direct contradiction of the device itself.
Cheers
Steve
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 15:27 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
On 2013-08-11 13:26, Steve Nelson wrote: Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Run the poller manually and see if there are any issues, or if it exits early :
./poller.php -h <hostname or device_id>
It should always end with the : "MySQL: Cell[0/0s] Row[8/0s] Rows[33/0.02s] Column[0/0s] Update[72/0.05s] Insert[2/0.02s] Delete[0/0s]" line, else something broke.
It's next to impossible for the ports poller to not work on individual devices, as it's all just IF-MIB, probably the most standard MIB around.
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
Is there output from the ports poller in there?
Something like :
Port virbr0(3) HC Octets, HC UcastPkts, VLAN == bps(10.0kbps/1.97kbps)bytes(204kB/40.1kB)pk
The fact that you get NaN instead of a graph error means that it has created the RRDs.
And check the ownership of those RRDs. Sander
Adam,
Interfaces showing zero bytes, very odd as I spent an hour today streaming HD video to generate some traffic across the interface.
The odd thing is here, is that the upstream switch which is also in Observium records the traffic fine. I am wondering if it's because we have a port channel on the ASA rather than straight interfaces.
Output :
Observium v0.13.8.4238 Poller
Starting polling run:
Array ( ) Array ( ) sta-fwl-001.staidanscatholicacademy.co.uk 18 asa (cisco) Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (1831268 seconds) Uptime: 21 days, 4h 41m 8s Module time: 0.5652s Cisco Adaptive Security Appliance Version 9.1(1)
Hardware: ASA5525 Version: 9.1(1) Features: Serial: Module time: 0.0677sIPMI: Module time: 0.0067sSensors: Caching: entity-sensor .1.3.6.1.2.1.99.1.1.1.4 Checking (snmp) fanspeed Chassis Fan Sensor 1 5120 RPM
Checking alerts Checking (snmp) fanspeed Chassis Fan Sensor 2 5120 RPM
Checking alerts Checking (snmp) fanspeed Chassis Fan Sensor 3 5120 RPM
Checking alerts Checking (snmp) temperature CPU Temperature Sensor 0/0 48 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 1 34 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 2 28 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 3 33 C
Checking alerts Module time: 0.0631sProcessor Chassis 0%
Checking alerts Processor Processor 0/0 0%
Checking alerts Processor Chassis 0%
Checking alerts Module time: 0.1873sMempool Processor 0/0 - System memory: 28.19% Checking alerts
Module time: 0.2465sModule time: 0.0004sPolling Netstats: IP TCP UDP ICMP SNMP Module time: 0.6932sHR Stats: Module time: 0.108sModule time: 0.3714sPolling IP-MIB ipSystemStats Module time: 0.1897sCaching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port Adaptive Security Appliance 'asa_mgmt_plane' interface(2) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'outside' interface(3) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/1' interface(4) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/2' interface(5) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/3' interface(6) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/4' interface(7) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'BLOKSOUT' interface(8) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/6' interface(9) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/7' interface(10) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Internal-Data0/1' interface(11) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'cplane' interface(12) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'mgmt_plane_int_tap' interface(13) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'management' interface(14) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Port-channel9' interface(16) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Port-channel10' interface(17) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (18) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (19) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (20) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (21) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (22) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (23) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (24) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (25) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (26) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (27) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Module time: 14.2203sBGP Peers: Caching: (BGP4-MIB) bgpPeerState bgpPeerAdminStatus bgpPeerInUpdates bgpPeerOutUpdates bgpPeerInTotalMessages bgpPeerOutTotalMessages bgpPeerFsmEstablishedTime bgpPeerInUpdateElapsedTime bgpPeerLocalAddr bgpPeerIdentifier cbgpPeerAcceptedPrefixes cbgpPeerDeniedPrefixes cbgpPeerPrefixAdminLimit cbgpPeerPrefixThreshold cbgpPeerPrefixClearThreshold cbgpPeerAdvertisedPrefixes cbgpPeerSuppressedPrefixes cbgpPeerWithdrawnPrefixes Module time: 1.5509sModule time: 0.0004sModule time: 0.0004sModule time: 0.0002sWireless: Module time: 0.0003sOSPF: Processes: Areas: Ports: Neighbours: Module time: 0.2794s cipsec_flowModule time: 0.1572s CRAS SessionsModule time: 0.0358sCisco CEF Switching Path: Caching OIDs: entPhysicalDescr entPhysicalName entPhysicalModelName Module time: 0.5388sModule time: 0.1427sMac Accounting: Caching DB...0 entries. Cisco Entries: -0-000000000000 + () -> 000000000000 1 MAC accounting entries
Module time: 0.2007sModule time: 0.0002sTunnel 708 (2482176) Address 217.23.234.118 HC Tunnel 709 (2482176) Address 217.23.234.118 HC Tunnel 765 (2482176) Address 217.23.234.118 HC Tunnel 768 (2482176) Address 217.23.234.118 HC Module time: 0.9214s Module time: 0.1215sModule time: 0.0899sModule time: 0.0001sArray ( ) Module time: 0.076sModule time: 0.0007sModule time: 0.0004sEntity Physical: Module time: 0.0004sModule time: 0.0002sFDB Tables Vlan | MAC | Port (dot1d|ifIndex) | Status ------------------------------------------------------------------------------------------ Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 21.1007 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.2s] Insert[6/1.47s] Delete[0/0s] nelsons@ubuntu:/opt/observium$ nelsons@ubuntu:/opt/observium$ nelsons@ubuntu:/opt/observium$
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 16:51 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
Is there output from the ports poller in there?
Something like :
Port virbr0(3) HC Octets, HC UcastPkts, VLAN == bps(10.0kbps/1.97kbps)bytes(204kB/40.1kB)pk
The fact that you get NaN instead of a graph error means that it has created the RRDs.
Does the web interface show the bps/pps rates for the port in the table displays?
adam.
On 2013-08-11 16:40, Steve Nelson wrote:
Hi Adam
Yes it appears to complete OK, output :
Vlan | MAC | Port (dot1d|ifIndex) | Status
-------------------- Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 17.6755 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.11s] Insert[6/0.18s] Delete[0/0s]
Still the graphs show no data, which is in direct contradiction of the device itself.
Cheers
Steve
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 15:27 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
On 2013-08-11 13:26, Steve Nelson wrote: Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Run the poller manually and see if there are any issues, or if it exits early :
./poller.php -h <hostname or device_id>
It should always end with the : "MySQL: Cell[0/0s] Row[8/0s] Rows[33/0.02s] Column[0/0s] Update[72/0.05s] Insert[2/0.02s] Delete[0/0s]" line, else something broke.
It's next to impossible for the ports poller to not work on individual devices, as it's all just IF-MIB, probably the most standard MIB around.
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Do you have anything 'unusual' about your SNMP configuration?
Port channels should work just like any other interface, and it's strange you're not getting statistics for the other interfaces.
Try running:
./poller.php -h 18 -m ports -d -r
And send me the output directly to adama@memetic.org. You probably want to strip out the SNMP community too.
adam.
On 2013-08-12 19:05, Steve Nelson wrote:
Adam,
Interfaces showing zero bytes, very odd as I spent an hour today streaming HD video to generate some traffic across the interface.
The odd thing is here, is that the upstream switch which is also in Observium records the traffic fine. I am wondering if it's because we have a port channel on the ASA rather than straight interfaces.
Output :
Observium v0.13.8.4238 Poller
Starting polling run:
Array ( ) Array ( ) sta-fwl-001.staidanscatholicacademy.co.uk 18 asa (cisco) Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (1831268 seconds) Uptime: 21 days, 4h 41m 8s Module time: 0.5652s Cisco Adaptive Security Appliance Version 9.1(1)
Hardware: ASA5525 Version: 9.1(1) Features: Serial: Module time: 0.0677sIPMI: Module time: 0.0067sSensors: Caching: entity-sensor .1.3.6.1.2.1.99.1.1.1.4 Checking (snmp) fanspeed Chassis Fan Sensor 1 5120 RPM
Checking alerts Checking (snmp) fanspeed Chassis Fan Sensor 2 5120 RPM
Checking alerts Checking (snmp) fanspeed Chassis Fan Sensor 3 5120 RPM
Checking alerts Checking (snmp) temperature CPU Temperature Sensor 0/0 48 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 1 34 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 2 28 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 3 33 C
Checking alerts Module time: 0.0631sProcessor Chassis 0%
Checking alerts Processor Processor 0/0 0%
Checking alerts Processor Chassis 0%
Checking alerts Module time: 0.1873sMempool Processor 0/0 - System memory: 28.19% Checking alerts
Module time: 0.2465sModule time: 0.0004sPolling Netstats: IP TCP UDP ICMP SNMP Module time: 0.6932sHR Stats: Module time: 0.108sModule time: 0.3714sPolling IP-MIB ipSystemStats Module time: 0.1897sCaching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port Adaptive Security Appliance 'asa_mgmt_plane' interface(2) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'outside' interface(3) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/1' interface(4) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/2' interface(5) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/3' interface(6) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/4' interface(7) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'BLOKSOUT' interface(8) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/6' interface(9) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/7' interface(10) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Internal-Data0/1' interface(11) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'cplane' interface(12) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'mgmt_plane_int_tap' interface(13) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'management' interface(14) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Port-channel9' interface(16) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Port-channel10' interface(17) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (18) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (19) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (20) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (21) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (22) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (23) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (24) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (25) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (26) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (27) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Module time: 14.2203sBGP Peers: Caching: (BGP4-MIB) bgpPeerState bgpPeerAdminStatus bgpPeerInUpdates bgpPeerOutUpdates bgpPeerInTotalMessages bgpPeerOutTotalMessages bgpPeerFsmEstablishedTime bgpPeerInUpdateElapsedTime bgpPeerLocalAddr bgpPeerIdentifier cbgpPeerAcceptedPrefixes cbgpPeerDeniedPrefixes cbgpPeerPrefixAdminLimit cbgpPeerPrefixThreshold cbgpPeerPrefixClearThreshold cbgpPeerAdvertisedPrefixes cbgpPeerSuppressedPrefixes cbgpPeerWithdrawnPrefixes Module time: 1.5509sModule time: 0.0004sModule time: 0.0004sModule time: 0.0002sWireless: Module time: 0.0003sOSPF: Processes: Areas: Ports: Neighbours: Module time: 0.2794s cipsec_flowModule time: 0.1572s CRAS SessionsModule time: 0.0358sCisco CEF Switching Path: Caching OIDs: entPhysicalDescr entPhysicalName entPhysicalModelName Module time: 0.5388sModule time: 0.1427sMac Accounting: Caching DB...0 entries. Cisco Entries: -0-000000000000 + () -> 000000000000 1 MAC accounting entries
Module time: 0.2007sModule time: 0.0002sTunnel 708 (2482176) Address 217.23.234.118 HC Tunnel 709 (2482176) Address 217.23.234.118 HC Tunnel 765 (2482176) Address 217.23.234.118 HC Tunnel 768 (2482176) Address 217.23.234.118 HC Module time: 0.9214s Module time: 0.1215sModule time: 0.0899sModule time: 0.0001sArray ( ) Module time: 0.076sModule time: 0.0007sModule time: 0.0004sEntity Physical: Module time: 0.0004sModule time: 0.0002sFDB Tables Vlan | MAC | Port (dot1d|ifIndex) | Status
Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 21.1007 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.2s] Insert[6/1.47s] Delete[0/0s] nelsons@ubuntu:/opt/observium$ nelsons@ubuntu:/opt/observium$ nelsons@ubuntu:/opt/observium$
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 16:51 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
Is there output from the ports poller in there?
Something like :
Port virbr0(3) HC Octets, HC UcastPkts, VLAN == bps(10.0kbps/1.97kbps)bytes(204kB/40.1kB)pk
The fact that you get NaN instead of a graph error means that it has created the RRDs.
Does the web interface show the bps/pps rates for the port in the table displays?
adam.
On 2013-08-11 16:40, Steve Nelson wrote: Hi Adam
Yes it appears to complete OK, output :
Vlan | MAC | Port (dot1d|ifIndex) | Status
-------------------- Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 17.6755 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.11s] Insert[6/0.18s] Delete[0/0s]
Still the graphs show no data, which is in direct contradiction of the device itself.
Cheers
Steve
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 15:27 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
On 2013-08-11 13:26, Steve Nelson wrote: Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Run the poller manually and see if there are any issues, or if it exits early :
./poller.php -h <hostname or device_id>
It should always end with the : "MySQL: Cell[0/0s] Row[8/0s] Rows[33/0.02s] Column[0/0s] Update[72/0.05s] Insert[2/0.02s] Delete[0/0s]" line, else something broke.
It's next to impossible for the ports poller to not work on individual devices, as it's all just IF-MIB, probably the most standard MIB around.
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thanks Adam, Will do.
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 12 August 2013 19:31 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
Do you have anything 'unusual' about your SNMP configuration?
Port channels should work just like any other interface, and it's strange you're not getting statistics for the other interfaces.
Try running:
./poller.php -h 18 -m ports -d -r
And send me the output directly to adama@memetic.org. You probably want to strip out the SNMP community too.
adam.
On 2013-08-12 19:05, Steve Nelson wrote:
Adam,
Interfaces showing zero bytes, very odd as I spent an hour today streaming HD video to generate some traffic across the interface.
The odd thing is here, is that the upstream switch which is also in Observium records the traffic fine. I am wondering if it's because we have a port channel on the ASA rather than straight interfaces.
Output :
Observium v0.13.8.4238 Poller
Starting polling run:
Array ( ) Array ( ) sta-fwl-001.staidanscatholicacademy.co.uk 18 asa (cisco) Module [ unix-agent ] disabled globally. Using SNMP Agent sysUpTime (1831268 seconds) Uptime: 21 days, 4h 41m 8s Module time: 0.5652s Cisco Adaptive Security Appliance Version 9.1(1)
Hardware: ASA5525 Version: 9.1(1) Features: Serial: Module time: 0.0677sIPMI: Module time: 0.0067sSensors: Caching: entity-sensor .1.3.6.1.2.1.99.1.1.1.4 Checking (snmp) fanspeed Chassis Fan Sensor 1 5120 RPM
Checking alerts Checking (snmp) fanspeed Chassis Fan Sensor 2 5120 RPM
Checking alerts Checking (snmp) fanspeed Chassis Fan Sensor 3 5120 RPM
Checking alerts Checking (snmp) temperature CPU Temperature Sensor 0/0 48 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 1 34 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 2 28 C
Checking alerts Checking (snmp) temperature Chassis Ambient Temperature Sensor 3 33 C
Checking alerts Module time: 0.0631sProcessor Chassis 0%
Checking alerts Processor Processor 0/0 0%
Checking alerts Processor Chassis 0%
Checking alerts Module time: 0.1873sMempool Processor 0/0 - System memory: 28.19% Checking alerts
Module time: 0.2465sModule time: 0.0004sPolling Netstats: IP TCP UDP ICMP SNMP Module time: 0.6932sHR Stats: Module time: 0.108sModule time: 0.3714sPolling IP-MIB ipSystemStats Module time: 0.1897sCaching Oids: ifEntry ifXEntry dot3StatsDuplexStatus Port Adaptive Security Appliance 'asa_mgmt_plane' interface(2) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'outside' interface(3) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/1' interface(4) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/2' interface(5) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/3' interface(6) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/4' interface(7) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'BLOKSOUT' interface(8) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/6' interface(9) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'GigabitEthernet0/7' interface(10) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Internal-Data0/1' interface(11) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'cplane' interface(12) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'mgmt_plane_int_tap' interface(13) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'management' interface(14) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Port-channel9' interface(16) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port Adaptive Security Appliance 'Port-channel10' interface(17) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (18) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (19) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (20) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (21) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (22) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (23) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (24) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (25) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (26) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port (27) VLAN == ifMtu ifSpeed ifHighSpeed bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Module time: 14.2203sBGP Peers: Caching: (BGP4-MIB) bgpPeerState bgpPeerAdminStatus bgpPeerInUpdates bgpPeerOutUpdates bgpPeerInTotalMessages bgpPeerOutTotalMessages bgpPeerFsmEstablishedTime bgpPeerInUpdateElapsedTime bgpPeerLocalAddr bgpPeerIdentifier cbgpPeerAcceptedPrefixes cbgpPeerDeniedPrefixes cbgpPeerPrefixAdminLimit cbgpPeerPrefixThreshold cbgpPeerPrefixClearThreshold cbgpPeerAdvertisedPrefixes cbgpPeerSuppressedPrefixes cbgpPeerWithdrawnPrefixes Module time: 1.5509sModule time: 0.0004sModule time: 0.0004sModule time: 0.0002sWireless: Module time: 0.0003sOSPF: Processes: Areas: Ports: Neighbours: Module time: 0.2794s cipsec_flowModule time: 0.1572s CRAS SessionsModule time: 0.0358sCisco CEF Switching Path: Caching OIDs: entPhysicalDescr entPhysicalName entPhysicalModelName Module time: 0.5388sModule time: 0.1427sMac Accounting: Caching DB...0 entries. Cisco Entries: -0-000000000000 + () -> 000000000000 1 MAC accounting entries
Module time: 0.2007sModule time: 0.0002sTunnel 708 (2482176) Address 217.23.234.118 HC Tunnel 709 (2482176) Address 217.23.234.118 HC Tunnel 765 (2482176) Address 217.23.234.118 HC Tunnel 768 (2482176) Address 217.23.234.118 HC Module time: 0.9214s Module time: 0.1215sModule time: 0.0899sModule time: 0.0001sArray ( ) Module time: 0.076sModule time: 0.0007sModule time: 0.0004sEntity Physical: Module time: 0.0004sModule time: 0.0002sFDB Tables Vlan | MAC | Port (dot1d|ifIndex) | Status
-------------------- Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 21.1007 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.2s] Insert[6/1.47s] Delete[0/0s] nelsons@ubuntu:/opt/observium$ nelsons@ubuntu:/opt/observium$ nelsons@ubuntu:/opt/observium$
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 16:51 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
Is there output from the ports poller in there?
Something like :
Port virbr0(3) HC Octets, HC UcastPkts, VLAN == bps(10.0kbps/1.97kbps)bytes(204kB/40.1kB)pk
The fact that you get NaN instead of a graph error means that it has created the RRDs.
Does the web interface show the bps/pps rates for the port in the table displays?
adam.
On 2013-08-11 16:40, Steve Nelson wrote: Hi Adam
Yes it appears to complete OK, output :
Vlan | MAC | Port (dot1d|ifIndex) | Status
-------------------- Module time: 0.0012sping ping_snmp uptime processor mempool netstat_snmp netstat_snmp_pkt cipsec_flow_tunnels cipsec_flow_pkts cipsec_flow_bits cipsec_flow_stats cras_sessions poller_perf Polled in 17.6755 seconds UPDATED! MySQL: Cell[1/0s] Row[7/0s] Rows[33/0.01s] Column[0/0s] Update[68/0.11s] Insert[6/0.18s] Delete[0/0s]
Still the graphs show no data, which is in direct contradiction of the device itself.
Cheers
Steve
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 11 August 2013 15:27 To: Observium Network Observation System Subject: Re: [Observium] Cisco ASA Reporting -nan on interface graphs.
On 2013-08-11 13:26, Steve Nelson wrote: Hi
I have a Cisco 5525-X being polled from Observium, everything is fine except all the traffic graphs for the interfaces are reporting -nan as a value and showing no data.
The environmental graphs such as temp, CPU etc are all OK.
Any help would be greatly appreciated.
Run the poller manually and see if there are any issues, or if it exits early :
./poller.php -h <hostname or device_id>
It should always end with the : "MySQL: Cell[0/0s] Row[8/0s] Rows[33/0.02s] Column[0/0s] Update[72/0.05s] Insert[2/0.02s] Delete[0/0s]" line, else something broke.
It's next to impossible for the ports poller to not work on individual devices, as it's all just IF-MIB, probably the most standard MIB around.
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi all, this same issue is affecting me too, with two Cisco switches. Was there a solution to this?
If I use a MIB Browser, I can see the data throughput on the ports, but Observium shows zero data. The rest of the auto-detections work with CPU usage, port info, changes etc displayed.
I know data is going through these ports but the poller says none.
sample poller.php output (all ethernet ports show 0B/0B and 0pps):
Port VLAN1(1) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port FastEthernet0/1(2) replacing with 64-bit...VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port FastEthernet0/2(3) replacing with 64-bit...VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Run the poller in debug mode and check that it's correctly putting data into the RRDs :
./poller.php -h <host> -m ports -d
For example, I ran the poller twice and checked the values for the same port :
bps(155kbps/170kbps)bytes(645kB/709kB)pkts(50.5pps/57.4pps)RRD[cmd[update /mnt/ramdisk/observium_dev/alpha.memetic.org/port-2.rrd N:2170514919861:3218207596062:0:0:2996618646:3146176678:0:0:1:0:0:0:0:0:0]
bps(132kbps/201kbps)bytes(499kB/762kB)pkts(69.7pps/75.0pps)RRD[cmd[update /mnt/ramdisk/observium_dev/alpha.memetic.org/port-2.rrd N:2170515431396:3218208376547:0:0:2996620807:3146179005:0:0:1:0:0:0:0:0:0]
You should see the RRD pipe's output under the command :
stdout[OK u:0.00 s:0.00 r:1.58] stderr[]]
Then I can verify that the numbers got to RRD by checking the file :
root@alpha:/home/observium/dev# rrdtool info /mnt/ramdisk/observium_dev/alpha.memetic.org/port-2.rrd filename = "/mnt/ramdisk/observium_dev/alpha.memetic.org/port-2.rrd" rrd_version = "0003" step = 300 last_update = 1394165067 header_size = 14248 ds[INOCTETS].index = 0 ds[INOCTETS].type = "DERIVE" ds[INOCTETS].minimal_heartbeat = 600 ds[INOCTETS].min = 0.0000000000e+00 ds[INOCTETS].max = 1.2500000000e+10 ds[INOCTETS].last_ds = "2170515431396"
You'll probably find we're not getting the correct numbers. I don't remember what the issue was in Steve's case, but I do remember it was nothing to do with us.
adam.
On 2014-03-06 21:16, Jeeves wrote:
Hi all, this same issue is affecting me too, with two Cisco switches. Was there a solution to this?
If I use a MIB Browser, I can see the data throughput on the ports, but Observium shows zero data. The rest of the auto-detections work with CPU usage, port info, changes etc displayed.
I know data is going through these ports but the poller says none.
sample poller.php output (all ethernet ports show 0B/0B and 0pps):
Port VLAN1(1) replacing with 64-bit...VLAN == bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port FastEthernet0/1(2) replacing with 64-bit...VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
Port FastEthernet0/2(3) replacing with 64-bit...VLAN == 1bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps) Checking alerts
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi, thanks for your reply. It doesnt seem to see any data on the port when I run that command (see output at end of post).
If I use iReasoning MIB browser and do an SNMP walk, ifInOctets.21 (port 20) shows 212492177, and a couple seconds later shows 212532659. So it appears as though the switch is showing data thrugh via SNMP. The other active ports also have data increasing on the ifInOctets SNMP entry.
Got any suggestions on what to try next?
Heres the output for Fa0/20. In fact all the ports show the same as this.
SQL[UPDATE `ports-state` set `poll_time` ='1394760997',`poll_period` ='632',`ifInOctets` ='0',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='0',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='0',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='0',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='0',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '297'] 1 updated Port FastEthernet0/20(21) replacing with 64-bit...VLAN == 1 ifInOctets (0 B) 0 Bps 632 secs
ifOutOctets (0 B) 0 Bps 632 secs
ifInErrors (0 B) 0 Bps 632 secs
ifOutErrors (0 B) 0 Bps 632 secs
ifInUcastPkts (0 B) 0 Bps 632 secs
ifOutUcastPkts (0 B) 0 Bps 632 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)RRD[cmd[update /opt/observium/rrd/pureip-office-switch2/port-21.rrd N:0:0:0:0:0:0:618:882734:2:0:0:U:U:U:U] stdout[OK u:0.01 s:0.01 r:54.03 OK u:0.01 s:0.01 r:54.04] stderr[]]
What is the output from the SNMP walk, earlier in the debugging output?
Thanks, adam.
On 2014-03-13 19:48, Jeeves wrote:
Hi, thanks for your reply. It doesnt seem to see any data on the port when I run that command (see output at end of post).
If I use iReasoning MIB browser and do an SNMP walk, ifInOctets.21 (port 20) shows 212492177, and a couple seconds later shows 212532659. So it appears as though the switch is showing data thrugh via SNMP. The other active ports also have data increasing on the ifInOctets SNMP entry.
Got any suggestions on what to try next?
Heres the output for Fa0/20. In fact all the ports show the same as this.
SQL[UPDATE `ports-state` set `poll_time` ='1394760997',`poll_period` ='632',`ifInOctets` ='0',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='0',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='0',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='0',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='0',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '297'] 1 updated Port FastEthernet0/20(21) replacing with 64-bit...VLAN == 1 ifInOctets (0 B) 0 Bps 632 secs
ifOutOctets (0 B) 0 Bps 632 secs
ifInErrors (0 B) 0 Bps 632 secs
ifOutErrors (0 B) 0 Bps 632 secs
ifInUcastPkts (0 B) 0 Bps 632 secs
ifOutUcastPkts (0 B) 0 Bps 632 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)RRD[cmd[update /opt/observium/rrd/pureip-office-switch2/port-21.rrd N:0:0:0:0:0:0:618:882734:2:0:0:U:U:U:U] stdout[OK u:0.01 s:0.01 r:54.03 OK u:0.01 s:0.01 r:54.04] stderr[]]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thanks for the response Adam. Not sure exactly which output you need, but heres two samples from the snmpbulkwalk command ouput:
(as you can see many ports are not connected, thus have 64 as data in)
ifInOctets.1 = 64076673 ifInOctets.2 = 2705641375 ifInOctets.3 = 64 ifInOctets.4 = 64 ifInOctets.5 = 64 ifInOctets.6 = 64 ifInOctets.7 = 64 ifInOctets.8 = 64 ifInOctets.9 = 64 ifInOctets.10 = 64 ifInOctets.11 = 64 ifInOctets.12 = 64 ifInOctets.13 = 64 ifInOctets.14 = 64 ifInOctets.15 = 64 ifInOctets.16 = 64 ifInOctets.17 = 64 ifInOctets.18 = 64 ifInOctets.19 = 64 ifInOctets.20 = 64 ifInOctets.21 = 249030693 ifInOctets.22 = 64 ifInOctets.23 = 4007443734 ifInOctets.24 = 1016722 ifInOctets.25 = 126545219 ifInOctets.26 = 0
<-SNIP->
[21] => Array ( [ifIndex] => 21 [ifDescr] => FastEthernet0/20 [ifType] => ethernetCsmacd [ifMtu] => 1500 [ifSpeed] => 100000000 [ifPhysAddress] => <-SNIP-> [ifAdminStatus] => up [ifOperStatus] => up [ifLastChange] => <-SNIP-> [ifInOctets] => 249039877 [ifInUcastPkts] => 757096 [ifInNUcastPkts] => 644 [ifInDiscards] => 2 [ifInErrors] => 0 [ifInUnknownProtos] => 0 [ifOutOctets] => 133402921 [ifOutUcastPkts] => 411551 [ifOutNUcastPkts] => 921159 [ifOutDiscards] => 0 [ifOutErrors] => 0 [ifOutQLen] => 0 [ifSpecific] => zeroDotZero [ifName] => Fa0/20 [ifHCInOctets] => 0 [ifHCInUcastPkts] => 0 [ifHCOutOctets] => 0 [ifHCOutUcastPkts] => 0 [ifLinkUpDownTrapEnable] => enabled [ifHighSpeed] => 100 [ifPromiscuousMode] => false [ifConnectorPresent] => true [ifAlias] => [vmVlan] => 1 )
<-SNIP->
What did Observium send to RRD for that poll?
I suspect you're having snmpwalks fail intermittently half way through.
adam.
On 2014-03-13 23:25, Jeeves wrote:
Thanks for the response Adam. Not sure exactly which output you need, but heres two samples from the snmpbulkwalk command ouput:
(as you can see many ports are not connected, thus have 64 as data in)
ifInOctets.1 = 64076673 ifInOctets.2 = 2705641375 ifInOctets.3 = 64 ifInOctets.4 = 64 ifInOctets.5 = 64 ifInOctets.6 = 64 ifInOctets.7 = 64 ifInOctets.8 = 64 ifInOctets.9 = 64 ifInOctets.10 = 64 ifInOctets.11 = 64 ifInOctets.12 = 64 ifInOctets.13 = 64 ifInOctets.14 = 64 ifInOctets.15 = 64 ifInOctets.16 = 64 ifInOctets.17 = 64 ifInOctets.18 = 64 ifInOctets.19 = 64 ifInOctets.20 = 64 ifInOctets.21 = 249030693 ifInOctets.22 = 64 ifInOctets.23 = 4007443734 ifInOctets.24 = 1016722 ifInOctets.25 = 126545219 ifInOctets.26 = 0
<-SNIP->
[21] => Array ( [ifIndex] => 21 [ifDescr] => FastEthernet0/20 [ifType] => ethernetCsmacd [ifMtu] => 1500 [ifSpeed] => 100000000 [ifPhysAddress] => <-SNIP-> [ifAdminStatus] => up [ifOperStatus] => up [ifLastChange] => <-SNIP-> [ifInOctets] => 249039877 [ifInUcastPkts] => 757096 [ifInNUcastPkts] => 644 [ifInDiscards] => 2 [ifInErrors] => 0 [ifInUnknownProtos] => 0 [ifOutOctets] => 133402921 [ifOutUcastPkts] => 411551 [ifOutNUcastPkts] => 921159 [ifOutDiscards] => 0 [ifOutErrors] => 0 [ifOutQLen] => 0 [ifSpecific] => zeroDotZero [ifName] => Fa0/20 [ifHCInOctets] => 0 [ifHCInUcastPkts] => 0 [ifHCOutOctets] => 0 [ifHCOutUcastPkts] => 0 [ifLinkUpDownTrapEnable] => enabled [ifHighSpeed] => 100 [ifPromiscuousMode] => false [ifConnectorPresent] => true [ifAlias] => [vmVlan] => 1 )
<-SNIP->
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Adam, here is some more output. I ran the poller in verbose and cut/paste from the first section, then from where it updates SQL and RRDs.
It's not writing data for any ports and is happening to two of our switches. The rest of them work fine.
<SNIP> ifInOctets.1 = 58160653 ifInOctets.2 = 2647934915 ifInOctets.3 = 64 ifInOctets.4 = 64 ifInOctets.5 = 64 ifInOctets.6 = 64 ifInOctets.7 = 64 ifInOctets.8 = 64 ifInOctets.9 = 64 ifInOctets.10 = 64 ifInOctets.11 = 64 ifInOctets.12 = 64 ifInOctets.13 = 64 ifInOctets.14 = 64 ifInOctets.15 = 64 ifInOctets.16 = 64 ifInOctets.17 = 64 ifInOctets.18 = 64 ifInOctets.19 = 64 ifInOctets.20 = 64 ifInOctets.21 = 264632472 ifInOctets.22 = 64 ifInOctets.23 = 2940611639 ifInOctets.24 = 2119555 ifInOctets.25 = 1442083505 ifInOctets.26 = 0
<SNIP>
[21] => Array ( [ifIndex] => 21 [ifDescr] => FastEthernet0/20 [ifType] => ethernetCsmacd [ifMtu] => 1500 [ifSpeed] => 100000000 [ifPhysAddress] => 0:2:4b:75:b:54 [ifAdminStatus] => up [ifOperStatus] => up [ifLastChange] => 0:0:00:26.18 [ifInOctets] => 264632472 [ifInUcastPkts] => 633512 [ifInNUcastPkts] => 595 [ifInDiscards] => 3 [ifInErrors] => 0 [ifInUnknownProtos] => 0 [ifOutOctets] => 100445793 [ifOutUcastPkts] => 315909 [ifOutNUcastPkts] => 756084 [ifOutDiscards] => 0 [ifOutErrors] => 0 [ifOutQLen] => 0 [ifSpecific] => zeroDotZero [ifName] => Fa0/20 [ifHCInOctets] => 0 [ifHCInUcastPkts] => 0 [ifHCOutOctets] => 0 [ifHCOutUcastPkts] => 0 [ifLinkUpDownTrapEnable] => enabled [ifHighSpeed] => 100 [ifPromiscuousMode] => false [ifConnectorPresent] => true [ifAlias] => [vmVlan] => 1 ) <SNIP>
Checking alerts Array ( [ifInOctets_rate] => 0 [ifOutOctets_rate] => 0 [ifInErrors_rate] => 0 [ifOutErrors_rate] => 0 [ifInUcastPkts_rate] => 0 [ifOutUcastPkts_rate] => 0 [ifOperStatus] => down [ifAdminStatus] => up [ifMtu] => 1500 [ifSpeed] => 0 [ifInOctets_perc] => 0 [ifOutOctets_perc] => 0 [rx_ave_pktsize] => [tx_ave_pktsize] => )
SQL[UPDATE `ports-state` set `poll_time` ='1395092724',`poll_period` ='266',`ifInOctets` ='0',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='0',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='0',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='0',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='0',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '296'] 1 updated Port FastEthernet0/19(20) replacing with 64-bit...VLAN == 1 ifInOctets (0 B) 0 Bps 266 secs
ifOutOctets (0 B) 0 Bps 266 secs
ifInErrors (0 B) 0 Bps 266 secs
ifOutErrors (0 B) 0 Bps 266 secs
ifInUcastPkts (0 B) 0 Bps 266 secs
ifOutUcastPkts (0 B) 0 Bps 266 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)RRD[cmd[update /opt/observium/rrd/switch2/port-20.rrd N:0:0:0:0:0:0:0:0:0:0:0:U:U:U:U] stdout[OK u:0.01 s:0.01 r:50.28] stderr[]]
Checking alerts Array ( [ifInOctets_rate] => 0 [ifOutOctets_rate] => 0 [ifInErrors_rate] => 0 [ifOutErrors_rate] => 0 [ifInUcastPkts_rate] => 0 [ifOutUcastPkts_rate] => 0 [ifOperStatus] => down [ifAdminStatus] => up [ifMtu] => 1500 [ifSpeed] => 0 [ifInOctets_perc] => 0 [ifOutOctets_perc] => 0 [rx_ave_pktsize] => [tx_ave_pktsize] => )
SQL[UPDATE `ports-state` set `poll_time` ='1395092724',`poll_period` ='266',`ifInOctets` ='0',`ifInOctets_rate` ='0',`ifInOctets_delta` ='0',`ifOutOctets` ='0',`ifOutOctets_rate` ='0',`ifOutOctets_delta` ='0',`ifInErrors` ='0',`ifInErrors_rate` ='0',`ifInErrors_delta` ='0',`ifOutErrors` ='0',`ifOutErrors_rate` ='0',`ifOutErrors_delta` ='0',`ifInUcastPkts` ='0',`ifInUcastPkts_rate` ='0',`ifInUcastPkts_delta` ='0',`ifOutUcastPkts` ='0',`ifOutUcastPkts_rate` ='0',`ifOutUcastPkts_delta` ='0',`ifInOctets_perc` ='0',`ifOutOctets_perc` ='0',`ifOctets_rate` ='0',`ifUcastPkts_rate` ='0',`ifErrors_rate` ='0' WHERE `port_id` = '297'] 1 updated Port FastEthernet0/20(21) replacing with 64-bit...VLAN == 1 ifInOctets (0 B) 0 Bps 266 secs
ifOutOctets (0 B) 0 Bps 266 secs
ifInErrors (0 B) 0 Bps 266 secs
ifOutErrors (0 B) 0 Bps 266 secs
ifInUcastPkts (0 B) 0 Bps 266 secs
ifOutUcastPkts (0 B) 0 Bps 266 secs bps(0bps/0bps)bytes(0B/0B)pkts(0pps/0pps)RRD[cmd[update /opt/observium/rrd/switch2/port-21.rrd N:0:0:0:0:0:0:595:756084:3:0:0:U:U:U:U] stdout[OK u:0.01 s:0.01 r:50.29] stderr[]]
participants (5)
-
Adam Armstrong -
Jeeves -
Nikolay Shopik -
Sander Steffann -
Steve Nelson