Is the snmp output from Aruba devices total rubbish or is something upfucked in my install.
Observium 8.6.9263 (10th June 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.1.25-MariaDB-1~xenial (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6)
I have a bunch of Aruba devices, WAP205H, IAP155, 303H and a single 7005. OS little varied but usually 6.4x or 6.5x. I am aware that the Aruba is not specifically supported but would expect basic snmp bandwidth info to be correct ( ish )
IAP155 and 7005 seem to report bandwidth traffic ok but the 205and 303 report nonsense. ( see the attached graph ) . Are there other Aruba users out there with similar issues or is it just me?
Hi
Observium: professional edition, 18.1.9001 (stable)
We have Aruba IAP-335 devices (firmware 6.5.4.2) and the bandwidth traffic sreporting seems ok. The fields "number of APs" and "wireless clients" are not populated, but i think this is a general issue (already asked on the mailing list quite some time ago).
Cheers
Thomy
Am 11.06.2018 um 14:47 schrieb Rowlands Mark:
Observium 8.6.9263 (10th June 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.1.25-MariaDB-1~xenial (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6)
I have a bunch of Aruba devices, WAP205H, IAP155, 303H and a single 7005. OS little varied but usually 6.4x or 6.5x. I am aware that the Aruba is not specifically supported but would expect basic snmp bandwidth info to be correct ( ish )
IAP155 and 7005 seem to report bandwidth traffic ok but the 205and 303 report nonsense. ( see the attached graph ) . Are there other Aruba users out there with similar issues or is it just me?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
This is an odd traffic profile. It's possible that snmpwalk is breaking on that device, so you could try to use the separate_walk ports module.
You can also do a few walks and see if the numbers bounce around a lot.
adam.
Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 2018-06-11 14:00:07, Rowlands Mark mark.rowlands@riksbyggen.se wrote: Observium 8.6.9263 (10th June 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.1.25-MariaDB-1~xenial (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6)
I have a bunch of Aruba devices, WAP205H, IAP155, 303H and a single 7005. OS little varied but usually 6.4x or 6.5x. I am aware that the Aruba is not specifically supported but would expect basic snmp bandwidth info to be correct ( ish )
IAP155 and 7005 seem to report bandwidth traffic ok but the 205and 303 report nonsense. ( see the attached graph ) . Are there other Aruba users out there with similar issues or is it just me? _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Couldn’t find much info/documentation on the separate_walk module. Perhaps because
//$setting = 'enable_ports_separate_walk'; //$config_variable[$setting]['section'] = $section; //$config_variable[$setting]['subsection'] = 'Ports Modules'; //$config_variable[$setting]['name'] = 'Enable walk separate IF-MIB tables'; //$config_variable[$setting]['type'] = 'bool'; //$config_variable[$setting]['shortdesc'] = 'NOT ENABLED, do not use this globally! Walk separate IF-MIB tables instead global ifEntry, ifXEntry.'; // FIXME when we have a toggle to not display it ever, make sure it's in the array for docs generation etc.
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 06 July 2018 18:09 To: observium@observium.org Subject: Re: [Observium] Is the snmp output from Aruba devices total rubbish or is something upfucked in my install.
This is an odd traffic profile. It's possible that snmpwalk is breaking on that device, so you could try to use the separate_walk ports module.
You can also do a few walks and see if the numbers bounce around a lot.
adam.
Sent from Mailbirdhttp://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm_campaign=sent-from-mailbird
On 2018-06-11 14:00:07, Rowlands Mark mark.rowlands@riksbyggen.se wrote: Observium 8.6.9263 (10th June 2018) OS Linux 4.4.0-116-generic [amd64] (Ubuntu 16.04) Apache 2.4.18 (Ubuntu) PHP 7.0.30-0ubuntu0.16.04.1 (OPcache: ENABLED) Python 2.7.12 MySQL 10.1.25-MariaDB-1~xenial (extension: mysqli 5.0.12-dev) SNMP NET-SNMP 5.7.3 RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock) Fping 3.13 (IPv4 and IPv6)
I have a bunch of Aruba devices, WAP205H, IAP155, 303H and a single 7005. OS little varied but usually 6.4x or 6.5x. I am aware that the Aruba is not specifically supported but would expect basic snmp bandwidth info to be correct ( ish )
IAP155 and 7005 seem to report bandwidth traffic ok but the 205and 303 report nonsense. ( see the attached graph ) . Are there other Aruba users out there with similar issues or is it just me? _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (3)
-
Adam Armstrong -
Rowlands Mark -
Thomas Stather