New subject: RRD Files - Error Drawing Graph - Before you groan, its limited to OpenBSD and I have an RRDCommand.. ; )

19 May 2016

This is likely because openbsd doesn't return the same number of
values in that table.

Either we need to switch back to the old graph for openbsd, or
work out how to display one for openbsd.

I'll add it to the list to investigate!

Adam.

Sent from BlueMail <http://www.bluemail.me/r>

On 20 May 2016, at 10:01, Andy Lemin <andy@brandwatch.com
<mailto:andy@brandwatch.com>> wrote:

    Hi Mike,

    Thanks for your reply. 

    Should PHP OPcache be enabled?
    Should the Python version be at least 3 or higher?
    Should I be trying to import the OpenBSD SNMP MIBs? How do you
    compile extra MIBs into Observium, or is that not supported /
    desired?

    From looking at the debug output I cannot see any obvious
    problems that might be causing this, however the Processors
    graph still fails to draw (only on the Overview page) for all
    the OpenBSD firewalls.

    root@intermap:/opt/observium# ./poller.php -d -m processors -h
    fw4.domain.com <http://fw4.domain.com>
    DEBUG!

    SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE
    `attrib_type` = 'dbSchema';]
    SQL RUNTIME[0.00007486s]

    SQL[SELECT @@SESSION.sql_mode;]
    SQL RUNTIME[0.00012112s]

    SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE
    `attrib_type` = 'current_rev';]
    SQL RUNTIME[0.00006700s]

    SQL[SELECT * FROM `config`]
    SQL RUNTIME[0.00006890s]

    CMD[/bin/hostname -f]

    CMD EXITCODE[0]
    CMD RUNTIME[0.003s]
    STDOUT[
    intermap.domain.com <http://intermap.domain.com>
    ]

      ___   _                              _
     / _ \ | |__   ___   ___  _ __ __   __(_) _   _  _ __ ___
    | | | || '_ \ / __| / _ \| '__|\ \ / /| || | | || '_ ` _ \
    | |_| || |_) |\__ \|  __/| |    \ V / | || |_| || | | | | |
     \___/ |_.__/ |___/ \___||_|     \_/  |_| \__,_||_| |_| |_|
                             Observium Professional 0.16.5.7872
                                       http://www.observium.org

    SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE
    `attrib_type` = 'latest_ver';]
    SQL RUNTIME[0.00008011s]

    SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE
    `attrib_type` = 'latest_rev';]
    SQL RUNTIME[0.00006199s]

    SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE
    `attrib_type` = 'latest_rev_date';]
    SQL RUNTIME[0.00006008s]

    CMD[/opt/observium/scripts/distro]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0354s]
    STDOUT[
    Linux|3.16.0-4-amd64|amd64|Debian|8.4
    ]

    CMD[/usr/bin/env python --version 2>&1]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0028s]
    STDOUT[
    Python 2.7.9
    ]

    SQL[SELECT version();]
    SQL RUNTIME[0.00012994s]

    CMD[/usr/bin/snmpget --version 2>&1]

    CMD EXITCODE[0]
    CMD RUNTIME[0.004s]
    STDOUT[
    NET-SNMP version: 5.7.2.1
    ]

    CMD[/usr/bin/rrdtool --version |head -n1]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0052s]
    STDOUT[
    RRDtool 1.4.8  Copyright 1997-2013 by Tobias Oetiker
    <tobi@oetiker.ch <mailto:tobi@oetiker.ch>>
    ]

    CMD[date "+%:z"]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0024s]
    STDOUT[
    +01:00
    ]

    SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);]
    SQL RUNTIME[0.00016093s]

    CMD[/usr/bin/env apache2 -v | awk '/Server version:/ {print $3}']

    CMD EXITCODE[0]
    CMD RUNTIME[0.0266s]
    STDOUT[
    Apache/2.4.10
    ]

    SQL[SELECT @@SESSION.sql_mode;]
    SQL RUNTIME[0.00012207s]

    SQL[SHOW VARIABLES LIKE 'character_set_connection']
    SQL RUNTIME[0.00038409s]

    #####  Software versions  #####

     o OS                   Linux 3.16.0-4-amd64 [amd64] (Debian 8.4)
     o Apache               2.4.10
     o PHP                  5.6.20-0+deb8u1 (OPcache: DISABLED)
     o Python               2.7.9
     o MySQL                5.5.49-0+deb8u1 (extension: mysqli
    5.5.49)
     o SNMP                 NET-SNMP 5.7.2.1
     o RRDtool              1.4.8

    #####  MySQL mode  #####

     o MySQL                

    #####  Charset info  #####

     o PHP                  UTF-8
     o MySQL                utf8

    #####  Timezones info  #####

     o Date                 Friday, 20-May-16 09:51:20 BST
     o PHP                  +01:00
     o MySQL                +01:00

    SQL[SELECT * FROM `alerts_maint` WHERE `maint_start` <
    '1463734280' AND `maint_end` > '1463734280']
    SQL RUNTIME[0.00032377s]
    #####  Starting polling run at 2016-05-20 09:51:20  #####

    SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND
    `hostname` LIKE 'fw4.domain.com <http://fw4.domain.com>' ORDER
    BY `device_id` ASC]
    SQL RUNTIME[0.00028682s]

    SQL[SELECT * FROM `devices` WHERE `device_id` = '5']
    SQL RUNTIME[0.00025702s]

    SQL[SELECT * FROM `entity_attribs` WHERE `entity_type` =
    'device' AND `entity_id` = '5']
    SQL RUNTIME[0.00006819s]

    SQL[SELECT * FROM `observium_processes` WHERE `process_name` =
    'poller.php' AND `device_id` = '5']
    SQL RUNTIME[0.00017905s]

    CMD[/bin/ps -ww -o pid,ppid,uid,gid,tty,stat,time,lstart,args
    -p 5307]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0082s]
    STDOUT[
      PID  PPID   UID   GID TT       STAT     TIME                
     STARTED COMMAND
     5307  5081     0     0 pts/1    S+   00:00:00 Fri May 20
    09:51:20 2016 php ./poller.php -d -m processors -h
    fw4.domain.com <http://fw4.domain.com>
    ]

    CMD[/bin/ps -ww -o pid,ppid,uid,gid,tty,stat,time,lstart,args
    -p 5081]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0075s]
    STDOUT[
      PID  PPID   UID   GID TT       STAT     TIME                
     STARTED COMMAND
     5081  5076     0     0 pts/1    Ss   00:00:00 Fri May 20
    09:50:43 2016 -bash
    ]

    SQL[INSERT INTO `observium_processes`
    (`process_pid`,`process_name`,`process_ppid`,`process_uid`,`process_command`,`process_start`,`device_id`)
     VALUES ('5307','poller.php','5081','0','php ./poller.php -d
    -m processors -h fw4.domain.com
    <http://fw4.domain.com>','1463734280','5')]
    SQL RUNTIME[0.16541505s]

    SQL[SELECT * FROM `alert_tests` WHERE 1]
    SQL RUNTIME[0.00015402s]
    Cached 2 alert rules.

    SQL[SELECT * FROM  `alert_table` WHERE `device_id` = '5']
    SQL RUNTIME[0.00052285s]
    #####  fw4.domain.com <http://fw4.domain.com> [5]  #####

     o OS                   openbsd
     o OS Group             unix
     o Last poll duration   2.40 seconds
     o Last Polled          2016-05-20 09:50:11
     o SNMP Version         v2c

    CMD[/usr/bin/fping -t 2000 -c 1 -q 10.0.255.252 2>&1]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0038s]
    STDOUT[
    10.0.255.252 : xmt/rcv/%loss = 1/1/0%, min/avg/max =
    0.31/0.31/0.31
    ]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OQUst -m
    SNMPv2-MIB -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    sysObjectID.0 sysUpTime.0]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0101s]
    STDOUT[
    sysObjectID.0 = enterprises.30155.23.1
    sysUpTime.0 = 6919686
    ]
    SNMP STATUS[TRUE]
     o Device status        Device is reachable by PING (0.31ms)
    and SNMP (10.10ms)
    RRD /opt/observium/rrd/fw4.domain.com/status.rrd
    <http://fw4.domain.com/status.rrd> already exists - no need to
    create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/status.rrd
    <http://fw4.domain.com/status.rrd> N:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.22]
    RRD_STATUS[TRUE]

    RRD /opt/observium/rrd/fw4.domain.com/ping.rrd
    <http://fw4.domain.com/ping.rrd> already exists - no need to
    create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/ping.rrd
    <http://fw4.domain.com/ping.rrd> N:0.31]
    RRD RUNTIME[0.0011s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.22]
    RRD_STATUS[TRUE]

    RRD /opt/observium/rrd/fw4.domain.com/ping_snmp.rrd
    <http://fw4.domain.com/ping_snmp.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/ping_snmp.rrd
    <http://fw4.domain.com/ping_snmp.rrd> N:10.10]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.22]
    RRD_STATUS[TRUE]

    SQL[SELECT * FROM `device_graphs` WHERE `device_id` = '5']
    SQL RUNTIME[0.00013709s]
     o Modules Enabled      system, os, processors

    including: includes/polling/system.inc.php
    #####  Module Start: system  #####

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OQUs -m
    SNMPv2-MIB -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    sysUpTime.0 sysLocation.0 sysContact.0 sysName.0]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0099s]
    STDOUT[
    sysUpTime.0 = 0:19:13:16.88
    sysLocation.0 = 4d4
    sysContact.0 = Network Group
    sysName.0 = fw4
    ]
    SNMP STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -Oqv -m
    SNMPv2-MIB -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161' sysDescr.0]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0099s]
    STDOUT[
    Firewall
    ]
    SNMP STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -Oqvn -m
    SNMPv2-MIB -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    sysObjectID.0]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0094s]
    STDOUT[
    .1.3.6.1.4.1.30155.23.1
    ]
    SNMP STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -Ovqn -m
    SNMP-FRAMEWORK-MIB -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    snmpEngineID.0]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0082s]
    STDOUT[
    "80 00 75 CB 80 31 30 E3 AD 57 3D C1 B7 "
    ]
    SNMP STATUS[TRUE]

    SQL[SELECT * FROM `observium_attribs`]
    SQL RUNTIME[0.00011206s]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -Oqv -m
    HOST-RESOURCES-MIB -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    hrSystemUptime.0]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0114s]
    STDOUT[
    0:19:13:31.00
    ]
    SNMP STATUS[TRUE]
    Using SNMP Agent hrSystemUptime (69211 sec. => 19h 13m 31s)
    RRD /opt/observium/rrd/fw4.domain.com/uptime.rrd
    <http://fw4.domain.com/uptime.rrd> already exists - no need to
    create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/uptime.rrd
    <http://fw4.domain.com/uptime.rrd> N:69211]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.28]
    RRD_STATUS[TRUE]

     o Uptime               19h 13m 31s

    > $uptimes - /opt/observium/poller.php:163
    /opt/observium/includes/polling/system.inc.php:188
    ===============================================
    array(
      [sysUpTime]      => int(69196)
      [hrSystemUptime] => int(69211)
      [use]            => string(14) "hrSystemUptime"
      [uptime]         => int(69211)
      [formatted]      => string(11) "19h 13m 31s"
      [message]        => string(31) "Using SNMP Agent
    hrSystemUptime"
      [previous]       => string(5) "69139"
      [diff]           => int(-72)
      [rebooted]       => int(0)
    )
    sysLocation rewritten from '4d4' to '122 Oyster Ln, Byfleet,
    Surrey KT14 7JU' by DB override.
     o sysObjectID          .1.3.6.1.4.1.30155.23.1
     o snmpEngineID         800075CB803130E3AD573DC1B7
     o sysDescr             Firewall
     o sysName              fw4
     o Location             122 Oyster Ln, Byfleet, Surrey KT14 7JU

    SQL[SELECT * FROM `devices_locations` WHERE `device_id` = '5']
    SQL RUNTIME[0.00032592s]
     o Module time          0.0695s

    including: includes/polling/os.inc.php
    #####  Module Start: os  #####

    SQL[SELECT * FROM `entPhysical` WHERE `device_id` = '5' AND
    `entPhysicalContainedIn` = '0']
    SQL RUNTIME[0.00008488s]
     o OS Poller            Group

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -Oqv -m
    UCD-SNMP-MIB -M /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161'
    .1.3.6.1.4.1.2021.7890.1.3.1.1.6.100.105.115.116.114.111]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0073s]
    STDOUT[
    No Such Object available on this agent at this OID
    ]
    SNMP STATUS[FALSE]
    SNMP ERROR[#1000 - Failed response]

    SQL[SELECT * FROM `snmp_errors` WHERE `device_id` = '5' AND
    `error_code` = '1000' AND `snmp_cmd` = 'snmpget' AND
    `snmp_options` = '-Oqv' AND `mib` = 'UCD-SNMP-MIB' AND `oid` =
    '.1.3.6.1.4.1.2021.7890.1.3.1.1.6.100.105.115.116.114.111';]
    SQL RUNTIME[0.00028896s]

    SQL[UPDATE `snmp_errors` set `error_count` ='40162',`updated`
    ='1463734281' WHERE `error_id` = '1']
    SQL RUNTIME[0.05195189s]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -Oqv -m
    UCD-SNMP-MIB -M /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.4.1.2021.7890.1.101.1]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0079s]
    STDOUT[
    No Such Object available on this agent at this OID
    ]
    SNMP STATUS[FALSE]
    SNMP ERROR[#1000 - Failed response]

    SQL[SELECT * FROM `snmp_errors` WHERE `device_id` = '5' AND
    `error_code` = '1000' AND `snmp_cmd` = 'snmpget' AND
    `snmp_options` = '-Oqv' AND `mib` = 'UCD-SNMP-MIB' AND `oid` =
    '.1.3.6.1.4.1.2021.7890.1.101.1';]
    SQL RUNTIME[0.00034595s]

    SQL[UPDATE `snmp_errors` set `error_count` ='40161',`updated`
    ='1463734281' WHERE `error_id` = '3']
    SQL RUNTIME[0.04289103s]
     o Hardware             Generic
     o Version              <empty>
     o Features             <empty>
     o Serial               <empty>
     o Asset                <empty>

     o Module time          0.1239s

    including: includes/polling/processors.inc.php
    #####  Module Start: processors  #####

    SQL[SELECT `processors`.*,
    `processors-state`.`processor_usage`,
    `processors-state`.`processor_polled` FROM `processors` LEFT
    JOIN `processors-state` USING(`processor_id`) WHERE
    `device_id` = '5']
    SQL RUNTIME[0.00037503s]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.1]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0287s]
    STDOUT[
    1
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-1.rrd
    <http://fw4.domain.com/processor-hr-1.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-1.rrd
    <http://fw4.domain.com/processor-hr-1.rrd> N:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.45]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='1',`processor_polled` ='1463734281' WHERE `processor_id` = '1']
    SQL RUNTIME[0.00019002s]

    > $data - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    =====================================================
    array(
      [processor_usage] => double(1)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":1}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '28']
    SQL RUNTIME[0.04260612s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-28.rrd
    <http://fw4.domain.com/alert-28.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-28.rrd
    <http://fw4.domain.com/alert-28.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.50]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.2]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0285s]
    STDOUT[
    1
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-2.rrd
    <http://fw4.domain.com/processor-hr-2.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-2.rrd
    <http://fw4.domain.com/processor-hr-2.rrd> N:1]
    RRD RUNTIME[0.0011s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.53]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='1',`processor_polled` ='1463734281' WHERE `processor_id` = '2']
    SQL RUNTIME[0.00018096s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(1)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":1}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '29']
    SQL RUNTIME[0.04028201s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-29.rrd
    <http://fw4.domain.com/alert-29.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-29.rrd
    <http://fw4.domain.com/alert-29.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.58]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpbulkwalk -t '20' -r '3' -v2c -c *** -Pu -OQUs
    -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    hrDeviceType]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0132s]
    STDOUT[
    hrDeviceType.1 = hrDeviceProcessor
    hrDeviceType.2 = hrDeviceProcessor
    hrDeviceType.3 = hrDeviceProcessor
    hrDeviceType.4 = hrDeviceProcessor
    hrDeviceType.5 = hrDeviceProcessor
    hrDeviceType.6 = hrDeviceProcessor
    hrDeviceType.7 = hrDeviceProcessor
    hrDeviceType.8 = hrDeviceProcessor
    ]
    SNMP STATUS[TRUE]

    CMD[/usr/bin/snmpbulkwalk -t '20' -r '3' -v2c -c *** -Pu -OQUs
    -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    hrDeviceDescr]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0134s]
    STDOUT[
    hrDeviceDescr.1 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.2 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.3 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.4 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.5 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.6 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.7 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    hrDeviceDescr.8 = Intel(R) Xeon(R) CPU E5-2637 v2 @ 3.50GHz
    ]
    SNMP STATUS[TRUE]

    CMD[/usr/bin/snmpbulkwalk -t '20' -r '3' -v2c -c *** -Pu -OQUs
    -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M
    /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp
    'udp':'fw4.domain.com <http://fw4.domain.com>':'161'
    hrProcessorLoad]

    CMD EXITCODE[0]
    CMD RUNTIME[0.012s]
    STDOUT[
    hrProcessorLoad.1 = 1
    hrProcessorLoad.2 = 1
    hrProcessorLoad.3 = 1
    hrProcessorLoad.4 = 0
    hrProcessorLoad.5 = 0
    hrProcessorLoad.6 = 0
    hrProcessorLoad.7 = 0
    hrProcessorLoad.8 = 0
    ]
    SNMP STATUS[TRUE]
    RRD
    /opt/observium/rrd/fw4.domain.com/processor-hr-average-1.rrd
    <http://fw4.domain.com/processor-hr-average-1.rrd> already
    exists - no need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-average-1.rrd
    <http://fw4.domain.com/processor-hr-average-1.rrd> N:0.38]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.62]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='0.38',`processor_polled` ='1463734281' WHERE `processor_id`
    = '3']
    SQL RUNTIME[0.00019979s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(0.38)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":0.38}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '30']
    SQL RUNTIME[0.05410504s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-30.rrd
    <http://fw4.domain.com/alert-30.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-30.rrd
    <http://fw4.domain.com/alert-30.rrd> N:1:1]
    RRD RUNTIME[0.0011s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.68]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.3]

    CMD EXITCODE[0]
    CMD RUNTIME[0.031s]
    STDOUT[
    1
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-3.rrd
    <http://fw4.domain.com/processor-hr-3.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-3.rrd
    <http://fw4.domain.com/processor-hr-3.rrd> N:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.72]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='1',`processor_polled` ='1463734281' WHERE `processor_id` =
    '110']
    SQL RUNTIME[0.00022006s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(1)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":1}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '114']
    SQL RUNTIME[0.04427004s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-114.rrd
    <http://fw4.domain.com/alert-114.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-114.rrd
    <http://fw4.domain.com/alert-114.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.76]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.4]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0326s]
    STDOUT[
    0
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-4.rrd
    <http://fw4.domain.com/processor-hr-4.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-4.rrd
    <http://fw4.domain.com/processor-hr-4.rrd> N:0]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.80]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='0',`processor_polled` ='1463734281' WHERE `processor_id` =
    '111']
    SQL RUNTIME[0.00023580s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(0)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":0}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '115']
    SQL RUNTIME[0.04477906s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-115.rrd
    <http://fw4.domain.com/alert-115.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-115.rrd
    <http://fw4.domain.com/alert-115.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.85]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.5]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0325s]
    STDOUT[
    0
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-5.rrd
    <http://fw4.domain.com/processor-hr-5.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-5.rrd
    <http://fw4.domain.com/processor-hr-5.rrd> N:0]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.89]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='0',`processor_polled` ='1463734281' WHERE `processor_id` =
    '112']
    SQL RUNTIME[0.00026202s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(0)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":0}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '116']
    SQL RUNTIME[0.04211521s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-116.rrd
    <http://fw4.domain.com/alert-116.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-116.rrd
    <http://fw4.domain.com/alert-116.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.93]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.6]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0325s]
    STDOUT[
    0
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-6.rrd
    <http://fw4.domain.com/processor-hr-6.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-6.rrd
    <http://fw4.domain.com/processor-hr-6.rrd> N:0]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:0.97]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='0',`processor_polled` ='1463734281' WHERE `processor_id` =
    '113']
    SQL RUNTIME[0.00021315s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(0)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":0}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '117']
    SQL RUNTIME[0.04165602s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-117.rrd
    <http://fw4.domain.com/alert-117.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-117.rrd
    <http://fw4.domain.com/alert-117.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:1.02]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.7]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0326s]
    STDOUT[
    0
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-7.rrd
    <http://fw4.domain.com/processor-hr-7.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-7.rrd
    <http://fw4.domain.com/processor-hr-7.rrd> N:0]
    RRD RUNTIME[0.0011s]
    RRD STDOUT[OK u:0.00 s:0.00 r:1.05]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='0',`processor_polled` ='1463734281' WHERE `processor_id` =
    '114']
    SQL RUNTIME[0.00021195s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(0)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":0}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734281',`last_ok` ='1463734281' WHERE
    `alert_table_id` = '118']
    SQL RUNTIME[0.04165697s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-118.rrd
    <http://fw4.domain.com/alert-118.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-118.rrd
    <http://fw4.domain.com/alert-118.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:1.10]
    RRD_STATUS[TRUE]

    CMD[/usr/bin/snmpget -t '20' -r '3' -v2c -c *** -Pu -OUQnv -M
    /opt/observium/mibs 'udp':'fw4.domain.com
    <http://fw4.domain.com>':'161' .1.3.6.1.2.1.25.3.3.1.2.8]

    CMD EXITCODE[0]
    CMD RUNTIME[0.0322s]
    STDOUT[
    0
    ]
    SNMP STATUS[TRUE]
    RRD /opt/observium/rrd/fw4.domain.com/processor-hr-8.rrd
    <http://fw4.domain.com/processor-hr-8.rrd> already exists - no
    need to create.

    RRD CMD[update
    /opt/observium/rrd/fw4.domain.com/processor-hr-8.rrd
    <http://fw4.domain.com/processor-hr-8.rrd> N:0]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:1.14]
    RRD_STATUS[TRUE]

    SQL[UPDATE `processors-state` set `processor_usage`
    ='0',`processor_polled` ='1463734282' WHERE `processor_id` =
    '115']
    SQL RUNTIME[0.00019383s]

     - /opt/observium/includes/polling/functions.inc.php:681
    /opt/observium/includes/alerts.inc.php:61
    ==================================================
    array(
      [processor_usage] => double(0)
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"processor_usage\":0}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734282',`last_ok` ='1463734282' WHERE
    `alert_table_id` = '119']
    SQL RUNTIME[0.04213905s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-119.rrd
    <http://fw4.domain.com/alert-119.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-119.rrd
    <http://fw4.domain.com/alert-119.rrd> N:1:1]
    RRD RUNTIME[0.0012s]
    RRD STDOUT[OK u:0.00 s:0.00 r:1.18]
    RRD_STATUS[TRUE]

    +---------------------------------+------------+-------+-------+
    | Label                           | Type       | Index | Usage |
    +---------------------------------+------------+-------+-------+
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 1     | 1%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 2     | 1%    |
    | Average                         | hr-average | 1     | 0%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 3     | 1%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 4     | 0%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 5     | 0%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 6     | 0%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 7     | 0%    |
    | Intel Xeon E5-2637 v2 @ 3.50GHz | hr         | 8     | 0%    |
    +---------------------------------+------------+-------+-------+

     o Module time          0.8206s

    #####  fw4.domain.com <http://fw4.domain.com> [5] completed
    poller modules at 2016-05-20 09:51:22  #####

     o Graphs [checked]     ping, ping_snmp, uptime, processor
     o Poller time          1.0543 seconds
    Updating fw4.domain.com <http://fw4.domain.com> - 

    > $update_array
    ========
    array(
      [uptime]                => int(69211)
      [last_polled]           => array(
                                   [0] => string(5) "NOW()"
                                 )
      [last_polled_timetaken] => double(1.0543)
      [device_state]          => string(116)
    "a:1:{s:15:"poller_mod_perf";a:3:{s:6:"system";d:0.069500000000000006;s:2:"os";d:0.1239;s:10:"processors";d:0.8206;}}"

                                 ┗ serialized ~ array(
                                   [poller_mod_perf] => array(
                                                          [system]
        => double(0.0695)
                                                          [os]    
        => double(0.1239)

    [processors] => double(0.8206)
                                                        )
                                 )
    )

    SQL[UPDATE `devices` set `uptime` ='69211',`last_polled`
    =NOW(),`last_polled_timetaken` ='1.0543',`device_state`
    ='a:1:{s:15:\"poller_mod_perf\";a:3:{s:6:\"system\";d:0.069500000000000006;s:2:\"os\";d:0.1239;s:10:\"processors\";d:0.8206;}}'
    WHERE `device_id` = '5']
    SQL RUNTIME[0.04171419s]
     o Updated Data         uptime, last_polled,
    last_polled_timetaken, device_state

     - /opt/observium/poller.php:163
    /opt/observium/includes/alerts.inc.php:61
    ======================================
    array(
      [device_status]        => string(1) "1"
      [device_status_type]   => string(0) ""
      [device_ping]          => string(4) "0.31"
      [device_snmp]          => string(5) "10.10"
      [device_uptime]        => string(5) "69139"
      [device_rebooted]      => int(0)
      [device_duration_poll] => string(4) "2.40"
    )

    SQL[UPDATE `alert_table` set `state`
    ='{\"metrics\":{\"device_status\":\"1\"}}',`count`
    ='0',`alert_status` ='1',`last_message` ='Checks
    OK',`last_checked` ='1463734282',`last_ok` ='1463734282' WHERE
    `alert_table_id` = '5']
    SQL RUNTIME[0.03916693s]
    RRD /opt/observium/rrd/fw4.domain.com/alert-5.rrd
    <http://fw4.domain.com/alert-5.rrd> already exists - no need
    to create.

    RRD CMD[update /opt/observium/rrd/fw4.domain.com/alert-5.rrd
    <http://fw4.domain.com/alert-5.rrd> N:1:1]
    RRD RUNTIME[0.0013s]
    RRD STDOUT[OK u:0.00 s:0.00 r:1.33]
    RRD_STATUS[TRUE]

    SQL[DELETE FROM `observium_processes` WHERE `process_pid` =
    '5307' AND `process_name` = 'poller.php' AND `device_id` = '5']
    SQL RUNTIME[0.04381084s]

    SQL[INSERT INTO `perf_times`
    (`type`,`doing`,`start`,`duration`,`devices`)  VALUES
    ('poll','fw4.domain.com
    <http://fw4.domain.com>','1463734280.7866','1.476','1')]
    SQL RUNTIME[0.04466701s]
    ./poller.php: fw4.domain.com <http://fw4.domain.com> - 1
    devices polled in 1.476 secs
    #####  Completed polling run at 2016-05-20 09:51:22  #####

    NOTE, $config['snmp']['hide_auth'] is set to TRUE, snmp
    community and snmp v3 auth hidden from debug output.
     o Devices Polled       1
     o Poller Time          1.476 secs
     o Memory usage         8.75MB (peak: 9MB)
     o MySQL Usage          Cell[4/0.002s] Row[10/0.008s]
    Rows[11/0.008s] Column[0/0s] Update[22/0.585s]
    Insert[2/0.211s] Delete[1/0.044s] 
     o RRDTool Usage        update[23/0.027s]

    Thanks for your time and help.
    Kind regards, Andy.

    On Fri, May 20, 2016 at 7:20 AM, Mike Stupalov
    <mike@observium.org <mailto:mike@observium.org>> wrote:

        Hi,

         please attach debug output:

        ./poller.php -d -m processors -h <device>

        On Thu, May 19, 2016 at 7:35 PM, Andy Lemin
        <andy@brandwatch.com <mailto:andy@brandwatch.com>> wrote:

            Hi,

            On Observium commercial, all of our OpenBSD firewalls
            fail to draw the "Processors" graph on the device
            Overview page :(

            However if you go to the "Graphs" tab on the Device
            page, the "Processors" graphs do draw..

            It seems to only be limited to the "Overview" tab on
            the device page.

            Our Linux servers, Cisco, HP gear etc are all fine.

            For both the OpenBSD firewalls and the Linux servers,
            the Processors graph on the Overview page seems to be
            based on "Device (ucd_ss_cpu)". But the Processors
            graph which does work looks to be based on "Device
            (processor)".

            So it seems that "Device (ucd_ss_cpu)" is not
            populated for OpenBSD, where Observium thinks it
            should be.

            Here is the RRD Command for a failing one;

            root@intermap:/opt/observium/rrd/ar1406.live.brandwatch.net#
            <http://ar1406.live.brandwatch.net#> /usr/bin/rrdtool
            graph /tmp/11MUfpl7O7LSQtoX.png -g -Y --lower-limit 0
            --alt-autoscale-max --start 1463587788 --end
            1463674188 --width 1152 --height 300 -c BACK#EEEEEE00
            -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000
            -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c
            FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font
            LEGEND:8:'DroidSansMono,DejaVuSansMono' --font
            AXIS:7:'DroidSansMono,DejaVuSansMono'
            --font-render-mode normal -E COMMENT:' Now Min Max
            Avg' COMMENT:'\l' CDEF:total= HRULE:0#555555

            ERROR: String ends after the = sign on 'CDEF:total='

            Here is the RRD Command for a Linux device which works;

            root@intermap:/opt/observium/rrd/ar1406.live.brandwatch.net#
            <http://ar1406.live.brandwatch.net#> /usr/bin/rrdtool
            graph /tmp/vskuqlACvSuyBGUW.png -g -Y --lower-limit 0
            --alt-autoscale-max --start 1463587973 --end
            1463674373 --width 1152 --height 300 -c BACK#EEEEEE00
            -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000
            -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c
            FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font
            LEGEND:8:'DroidSansMono,DejaVuSansMono' --font
            AXIS:7:'DroidSansMono,DejaVuSansMono'
            --font-render-mode normal -E COMMENT:' Now Min Max
            Avg' COMMENT:'\l'
            DEF:ssCpuRawUser=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawUser.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawUser.rrd:value:AVERAGE>
            DEF:ssCpuRawNice=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawNice.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawNice.rrd:value:AVERAGE>
            DEF:ssCpuRawSystem=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawSystem.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawSystem.rrd:value:AVERAGE>
            DEF:ssCpuRawWait=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawWait.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawWait.rrd:value:AVERAGE>
            DEF:ssCpuRawInterrupt=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawInterrupt.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawInterrupt.rrd:value:AVERAGE>
            DEF:ssCpuRawSoftIRQ=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawSoftIRQ.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawSoftIRQ.rrd:value:AVERAGE>
            DEF:ssCpuRawKernel=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawKernel.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawKernel.rrd:value:AVERAGE>
            DEF:ssCpuRawIdle=/opt/observium/rrd/ar1406.live.brandwatch.net/ucd_ssCpuRawIdle.rrd:value:AVERAGE
            <http://ar1406.live.brandwatch.net/ucd_ssCpuRawIdle.rrd:value:AVERAGE>
            CDEF:total=ssCpuRawUser,UN,0,ssCpuRawUser,IF,ssCpuRawNice,UN,0,ssCpuRawNice,IF,ssCpuRawSystem,UN,0,ssCpuRawSystem,IF,ssCpuRawWait,UN,0,ssCpuRawWait,IF,ssCpuRawInterrupt,UN,0,ssCpuRawInterrupt,IF,ssCpuRawSoftIRQ,UN,0,ssCpuRawSoftIRQ,IF,ssCpuRawKernel,UN,0,ssCpuRawKernel,IF,ssCpuRawIdle,UN,0,ssCpuRawIdle,IF,+,+,+,+,+,+,+
            CDEF:ssCpuRawUser_perc=ssCpuRawUser,total,/,100,*
            CDEF:ssCpuRawNice_perc=ssCpuRawNice,total,/,100,*
            CDEF:ssCpuRawSystem_perc=ssCpuRawSystem,total,/,100,*
            CDEF:ssCpuRawWait_perc=ssCpuRawWait,total,/,100,*
            CDEF:ssCpuRawInterrupt_perc=ssCpuRawInterrupt,total,/,100,*
            CDEF:ssCpuRawSoftIRQ_perc=ssCpuRawSoftIRQ,total,/,100,*
            CDEF:ssCpuRawKernel_perc=ssCpuRawKernel,total,/,100,*
            CDEF:ssCpuRawIdle_perc=ssCpuRawIdle,total,/,100,*
            HRULE:0#555555 AREA:ssCpuRawUser_perc#c02020:'User '
            GPRINT:ssCpuRawUser_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawUser_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawUser_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawUser_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawNice_perc#008f00:'Nice ':STACK
            GPRINT:ssCpuRawNice_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawNice_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawNice_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawNice_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawSystem_perc#ea8f00:'System ':STACK
            GPRINT:ssCpuRawSystem_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawSystem_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawSystem_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawSystem_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawWait_perc#1f78b4:'Wait ':STACK
            GPRINT:ssCpuRawWait_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawWait_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawWait_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawWait_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawInterrupt_perc#a6cee3:'Interrupt ':STACK
            GPRINT:ssCpuRawInterrupt_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawInterrupt_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawInterrupt_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawInterrupt_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawSoftIRQ_perc#b2df8a:'SoftIRQ ':STACK
            GPRINT:ssCpuRawSoftIRQ_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawSoftIRQ_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawSoftIRQ_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawSoftIRQ_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawKernel_perc#fb9a99:'Kernel ':STACK
            GPRINT:ssCpuRawKernel_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawKernel_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawKernel_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawKernel_perc:AVERAGE:%5.1lf%%\n
            AREA:ssCpuRawIdle_perc#f5f5e5:'Idle ':STACK
            GPRINT:ssCpuRawIdle_perc:LAST:%5.1lf%%
            GPRINT:ssCpuRawIdle_perc:MIN:%5.1lf%%
            GPRINT:ssCpuRawIdle_perc:MAX:%5.1lf%%
            GPRINT:ssCpuRawIdle_perc:AVERAGE:%5.1lf%%\n

            1233x339

            Failing OpenBSD Example;

            Working Linux Example;

            Thank you very much for your time, and a great system.
            The more I use Observium, the more I love it.

            Cheers, Andy.

            _______________________________________________
            observium mailing list
            observium@observium.org <mailto:observium@observium.org>
            http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

        -- 
        Mike Stupalov
        http://observium.org/

        _______________________________________________
        observium mailing list
        observium@observium.org <mailto:observium@observium.org>
        http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

    ------------------------------------------------------------------------

    observium mailing list
    observium@observium.org <mailto:observium@observium.org>
    http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________ observium mailing
list observium@observium.org <mailto:observium@observium.org>
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium 

RRD Files - Error Drawing Graph - Before you groan, its limited to OpenBSD and I have an RRDCommand.. ; )

Andy Lemin

Mike Stupalov

Andy Lemin

Adam Armstrong

/opt/observium/includes/polling/system.inc.php:188

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

Andy Lemin

/opt/observium/includes/polling/system.inc.php:188

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

Mike Stupalov

Andy Lemin

/opt/observium/includes/polling/system.inc.php:188

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

/opt/observium/includes/alerts.inc.php:61

tags (0)

participants (3)