Hi Scott
No Problem on my side. Some with v5.4.7 and others with v5.2.9 actually. (FG 100E and 600D) Tried SNMPv3 in an old time and it was working. Actually I’m running v2 on management network. Community Strings with six mixed upper and lower case. Observium CE 17.9.0
Regards
Le 5 nov. 2018 à 23:50, Scott Kaiser via observium observium@observium.org a écrit :
Anyone have any insight into the config for getting Observium to talk to Fortigate firewalls. Tried many options of community strings with now results. I am very familiar with setting up Fortigates for snmp monitoring but can't get Observium to talk to them.
Scott L. Kaiser Senior Network & Security Architect WireSafe, LLC 6516 Monona Drive #161 Madison, WI 53716 p 608.513.9447 e skaiser@wiresafe.net http://www.wiresafe.net __________________________________________________________________________________________ LEGAL NOTICE - Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. If you are not an addressee, any disclosure or copying of the contents of this e-mail or any action taken (or not taken) in reliance on it is unauthorized. If you are not an addressee, please inform sender immediately. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Adrien Malgoyre - Service Informatique Pythéas (SIP) CNRS - OSU Institut Pythéas - UMS 3470
Hi Scott,
There shouldn't be anything special required. SNMP is SNMP is SNMP. We don't even speak SNMP directly, we just use the net-snmp commandline binaries.
Base requirements for this to work are :
a) correct community string b) access to UDP/161 via SNMP to the device to be monitored c) the device to be monitored being willing to respond (not having local admin address filters)
It'll be easier to test with the snmp binaries on the command line. If you can get sysDescr.0, Observium will be able to talk to the device:
snmpget -v2c -c <community> <hostname> sysDescr.0
adam. On 2018-11-06 06:56:48, Adrien Malgoyre via observium observium@observium.org wrote: Hi Scott
No Problem on my side. Some with v5.4.7 and others with v5.2.9 actually. (FG 100E and 600D) Tried SNMPv3 in an old time and it was working. Actually I’m running v2 on management network. Community Strings with six mixed upper and lower case. Observium CE 17.9.0
Regards
Le 5 nov. 2018 à 23:50, Scott Kaiser via observium <observium@observium.org [mailto:observium@observium.org]> a écrit :
Anyone have any insight into the config for getting Observium to talk to Fortigate firewalls. Tried many options of community strings with now results. I am very familiar with setting up Fortigates for snmp monitoring but can't get Observium to talk to them. -- Scott L. Kaiser Senior Network & Security Architect WireSafe, LLC 6516 Monona Drive #161 Madison, WI 53716 p 608.513.9447 e skaiser@wiresafe.net [mailto:skaiser@wiresafe.net] http://www.wiresafe.net __________________________________________________________________________________________ LEGAL NOTICE - Unless expressly stated otherwise, this message is confidential and may be privileged. It is intended for the addressee(s) only. If you are not an addressee, any disclosure or copying of the contents of this e-mail or any action taken (or not taken) in reliance on it is unauthorized. If you are not an addressee, please inform sender immediately. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Adrien Malgoyre - Service Informatique Pythéas (SIP) CNRS - OSU Institut Pythéas - UMS 3470
participants (3)
-
Adam Armstrong -
Adrien Malgoyre -
Scott Kaiser