Graphs not drawing after latest update
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
[cid:image001.png@01CF9518.FABC1E60]
[cid:image002.png@01CF9518.FABC1E60]
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
Hi Mahomed,
Try going back 1 revision until you find one that works:
svn up -r 5587 then svn up -r 5586 etc.
There was a fairly heavy change in r5585 but it should (!) not have broken anything for you.
Tom
On 07/01/2014 11:41 AM, Mahomed Hussein wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Tom
Thanks for the quick response. Running the following command has resulted in the graphs coming back.
svn up -r 5584 /opt/observium
Please let me know if you need any info from me to help troubleshoot. You can email me direct if you like.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 01 July 2014 10:49 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi Mahomed,
Try going back 1 revision until you find one that works:
svn up -r 5587 then svn up -r 5586 etc.
There was a fairly heavy change in r5585 but it should (!) not have broken anything for you.
Tom
On 07/01/2014 11:41 AM, Mahomed Hussein wrote: Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
[cid:image001.png@01CF951C.F8C9C770]
[cid:image002.png@01CF951C.F8C9C770]
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com mailto:Mahomed@custodiandc.com> wrote:
Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
I have truble with drawing graphs for Shoutcast app. Num of clients is not drawing, but bandwitch is OK.
is this also related? I updated to: 5589.
Franjo Posavec system administrator entitas d.o.o. M: +385 (0)98 8808 72 S: franjo.posavec
On 01.07.2014 12:12, Tom Laermans wrote:
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com mailto:Mahomed@custodiandc.com> wrote:
Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Franjo,
Try r5590.
Tom
On 07/01/2014 12:35 PM, Franjo Posavec wrote:
Hi,
I have truble with drawing graphs for Shoutcast app. Num of clients is not drawing, but bandwitch is OK.
is this also related? I updated to: 5589.
Franjo Posavec system administrator entitas d.o.o. M: +385 (0)98 8808 72 S: franjo.posavec On 01.07.2014 12:12, Tom Laermans wrote:
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com mailto:Mahomed@custodiandc.com> wrote:
Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Nop,
here is output:
root@observium:/opt/observium# rrdtool graph /tmp/7hdOVzGVyoO6xgsN.png --alt-autoscale --rigid -E --start 1404125562 --end 1404211962 --width 1159 --height 300 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal COMMENT:"ShoutCast Server Current Unique Average Peak\n" CDEF:totcur=cur0 CDEF:totunique=unique0 CDEF:totpeak=peak0 VDEF:totavg=totcur,AVERAGE LINE2:totcur#:"Total of " GPRINT:totcur:LAST:"%6.2lf" GPRINT:totunique:LAST:"%6.2lf%s" GPRINT:totavg:"%6.2lf" GPRINT:totpeak:LAST:"%6.2lf" COMMENT:"\n" ERROR: invalid rpn expression in: cur0
Franjo Posavec system administrator entitas d.o.o. M: +385 (0)98 8808 72 S: franjo.posavec
On 01.07.2014 12:39, Tom Laermans wrote:
Hi Franjo,
Try r5590.
Tom
On 07/01/2014 12:35 PM, Franjo Posavec wrote:
Hi,
I have truble with drawing graphs for Shoutcast app. Num of clients is not drawing, but bandwitch is OK.
is this also related? I updated to: 5589.
Franjo Posavec system administrator entitas d.o.o. M: +385 (0)98 8808 72 S: franjo.posavec On 01.07.2014 12:12, Tom Laermans wrote:
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com mailto:Mahomed@custodiandc.com> wrote:
Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can tell me I can check it.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 01 July 2014 11:12 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote: Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
[cid:image001.png@01CF9522.491567C0]
[cid:image002.png@01CF9522.491567C0]
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can tell me I can check it.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 11:12
*To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hm!
It's important to note that the graph is not broken, and it did not stop working.
Apparently polling is failing, this is a totally different (and more important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein <Mahomed@custodiandc.com mailto:Mahomed@custodiandc.com> wrote:
Hi Tom 5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584. I don't know how to check what type of graph it is, but if you can tell me I can check it. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 11:12 *To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update Hi, That is useful info! multiport_bits_duo_separate fixed in r5589. Tom On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com <mailto:Mahomed@custodiandc.com>> wrote: Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com <mailto:Mahomed@CustodianDC.com> http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not stop working.
Apparently polling is failing, this is a totally different (and more important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein <Mahomed@custodiandc.com mailto:Mahomed@custodiandc.com> wrote:
Hi Tom 5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584. I don't know how to check what type of graph it is, but if you can tell me I can check it. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 11:12 *To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update Hi, That is useful info! multiport_bits_duo_separate fixed in r5589. Tom On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com <mailto:Mahomed@custodiandc.com>> wrote: Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com <mailto:Mahomed@CustodianDC.com> http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Looks like that fixed it. Thanks!
-Chip
On Tue, Jul 1, 2014 at 8:38 AM, Tom Laermans tom.laermans@powersource.cx wrote:
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not stop working.
Apparently polling is failing, this is a totally different (and more important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can tell me I can check it.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
*From:* observium [mailto:observium-bounces@observium.org] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 11:12
*To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This Month” graph is working, but the custom graphs at the bottom (second screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches (TP-Link) are not drawing either. I’ve tried enabling debug on the page, but I’m not sure if anything from the output will be useful. Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 01 July 2014 13:38 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote: Hm!
It's important to note that the graph is not broken, and it did not stop working.
Apparently polling is failing, this is a totally different (and more important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote: I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein <Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote: Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can tell me I can check it.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 01 July 2014 11:12
To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote: Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
[cid:image001.png@01CF95DF.D8C24650]
[cid:image002.png@01CF95DF.D8C24650]
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
having the same problem here with the custom_traffic graphs on the frontpage since version 5585. Seems they are broken starting with version 5585 - I'm getting an "Error Drawing Graphs"
The graphs in version 5584 are working fine
regards, Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We've updated to 5605 and the "Overall Transit & Peering Traffic This Month" graph is working, but the custom graphs at the bottom (second screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches (TP-Link) are not drawing either. I've tried enabling debug on the page, but I'm not sure if anything from the output will be useful. Please let me know what info you need and I'll get it for you. Thanks.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 13:38 *To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm! It's important to note that the graph is not broken, and it did not stop working. Apparently polling is failing, this is a totally different (and more important) issue! Looking at it right now. Tom On 07/01/2014 12:58 PM, Chip Pleasants wrote: I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help. -Chip On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein <Mahomed@custodiandc.com <mailto:Mahomed@custodiandc.com>> wrote: Hi Tom 5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584. I don't know how to check what type of graph it is, but if you can tell me I can check it. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com <mailto:Mahomed@CustodianDC.com> http://www.CustodianDC.com *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 11:12 *To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update Hi, That is useful info! multiport_bits_duo_separate fixed in r5589. Tom On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com <mailto:Mahomed@custodiandc.com>> wrote: Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com <mailto:Mahomed@CustodianDC.com> http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote:
Hi,
having the same problem here with the custom_traffic graphs on the frontpage since version 5585. Seems they are broken starting with version 5585 - I'm getting an "Error Drawing Graphs"
The graphs in version 5584 are working fine
regards, Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We've updated to 5605 and the "Overall Transit & Peering Traffic This Month" graph is working, but the custom graphs at the bottom (second screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches (TP-Link) are not drawing either. I've tried enabling debug on the page, but I'm not sure if anything from the output will be useful. Please let me know what info you need and I'll get it for you. Thanks.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 13:38 *To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm! It's important to note that the graph is not broken, and it did not stop working. Apparently polling is failing, this is a totally different (and more important) issue! Looking at it right now. Tom On 07/01/2014 12:58 PM, Chip Pleasants wrote: I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help. -Chip On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein <Mahomed@custodiandc.com <mailto:Mahomed@custodiandc.com>> wrote: Hi Tom 5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584. I don't know how to check what type of graph it is, but if you can tell me I can check it. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com <mailto:Mahomed@CustodianDC.com> http://www.CustodianDC.com *From:*observium [mailto:observium-bounces@observium.org <mailto:observium-bounces@observium.org>] *On Behalf Of *Tom Laermans *Sent:* 01 July 2014 11:12 *To:* Observium Network Observation System *Subject:* Re: [Observium] Graphs not drawing after latest update Hi, That is useful info! multiport_bits_duo_separate fixed in r5589. Tom On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.com <mailto:Mahomed@custodiandc.com>> wrote: Hi I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I've noticed that some graphs are not drawing. We haven't had any issues with the server and it has been up for 49 days. I'm not sure where to start. So far I've tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else). Please let me know if you require any other info. Thanks in advance for any assistance. A couple of screenshots are below. Kind regards, Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com <mailto:Mahomed@CustodianDC.com> http://www.CustodianDC.com _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Tom
They are the custom graphs on the main page. My colleague even tried changing “$config['frontpage']['custom_traffic']['ids']” to only have one port and it didn’t draw, and also tried a completely different port with no change.
How do I check what type of graph it is so I can more accurately answer your question?
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 03 July 2014 18:38 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote: Hi,
having the same problem here with the custom_traffic graphs on the frontpage since version 5585. Seems they are broken starting with version 5585 - I'm getting an "Error Drawing Graphs"
The graphs in version 5584 are working fine
regards, Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein: Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This Month” graph is working, but the custom graphs at the bottom (second screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches (TP-Link) are not drawing either. I’ve tried enabling debug on the page, but I’m not sure if anything from the output will be useful. Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 01 July 2014 13:38 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote: Hm!
It's important to note that the graph is not broken, and it did not stop working.
Apparently polling is failing, this is a totally different (and more important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote: I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein <Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote: Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can tell me I can check it.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.orgmailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: 01 July 2014 11:12
To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote: I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein <Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote: Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
[cid:image001.png@01CF9768.AB7C8090]
[cid:image002.png@01CF9768.AB7C8090]
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com http://www.CustodianDC.com
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
What is the graph's URL?
On 2014-07-04 03:20, Mahomed Hussein wrote:
Hi Tom
They are the custom graphs on the main page. My colleague even tried changing “$config['frontpage']['custom_traffic']['ids']” to only have one port and it didn’t draw, and also tried a completely different port with no change.
How do I check what type of graph it is so I can more accurately answer your question?
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: 03 July 2014 18:38 TO: Observium Network Observation System SUBJECT: Re: [Observium] Graphs not drawing after latest update
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote:
Hi,
having the same problem here with the custom_traffic graphs on the frontpage since version 5585. Seems they are broken starting with version 5585 - I'm getting an "Error Drawing Graphs"
The graphs in version 5584 are working fine
regards, Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This Month” graph is working, but the custom graphs at the bottom (second screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches (TP-Link) are not drawing either. I’ve tried enabling debug on the page, but I’m not sure if anything from the output will be useful. Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: 01 July 2014 13:38 TO: Observium Network Observation System SUBJECT: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not stop working.
Apparently polling is failing, this is a totally different (and more important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped working today after updating to r5588. I'm now at r5590 and doesn't seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the first email) but not the graphs in the second screenshot. All the graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can tell me I can check it.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Tom Laermans SENT: 01 July 2014 11:12
TO: Observium Network Observation System SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein Mahomed@custodiandc.com wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com [2]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [2] http://www.CustodianDC.com
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi - I can answer this as he's not around today.
The graph is the 'Custom_Traffic' user buildable graph on the main page, which isn't clickable so I can't give a URL for it specifically, however it is configured with:
$config['frontpage']['custom_traffic']['ids'] = "95517,95694,95716,95532,95431,95459,95359";
I've tried swapping out those 7 IDs for a single ID of a port/graph on another random device but it always fails to draw the graph, as per image below. I also tried renaming the graph (and removing the graph’s name completely so it goes to its default name) but still no rendering of the data, although the title is updating just fine ;)
[cid:image003.jpg@01CF9858.8C5F3EF0]
SVN is now 5618 - and I believe this is the only broken graph so all the others are working fine now.
Since it isn’t clickable I can’t even get the diagnostics for you about how it is trying to build the graph I’m afraid.
I also tried <url>/debug but the debug entries for the homepage do not include how that particular graph is generated, so I’m still stuck.
Any pointers most welcome!
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.com http://www.CustodianDC.com
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 05 July 2014 00:50 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
What is the graph's URL?
On 2014-07-04 03:20, Mahomed Hussein wrote:
Hi Tom
They are the custom graphs on the main page. My colleague even tried
changing “$config['frontpage']['custom_traffic']['ids']” to only have
one port and it didn’t draw, and also tried a completely different
port with no change.
How do I check what type of graph it is so I can more accurately
answer your question?
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 03 July 2014 18:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote:
Hi,
having the same problem here with the custom_traffic graphs on the
frontpage since version 5585.
Seems they are broken starting with version 5585 - I'm getting an
"Error Drawing Graphs"
The graphs in version 5584 are working fine
regards,
Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This
Month” graph is working, but the custom graphs at the bottom (second
screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches
(TP-Link) are not drawing either. I’ve tried enabling debug on the
page, but I’m not sure if anything from the output will be useful.
Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 13:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not
stop working.
Apparently polling is failing, this is a totally different (and more
important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped
working today after updating to r5588. I'm now at r5590 and doesn't
seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein
<Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the
first email) but not the graphs in the second screenshot. All the
graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can
tell me I can check it.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 11:12
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening
only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein
<Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote:
Hi
I wonder if someone can help point me in the right direction as to how
I can fix an issue with graphs not drawing. We updated to 0.14.6.5588
this morning and I’ve noticed that some graphs are not drawing. We
haven’t had any issues with the server and it has been up for 49 days.
I’m not sure where to start. So far I’ve tried another SVN update (in
case there was a quick fix) and rebooted the server (out of
desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance
for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
Also here is the URL by the way, just realised I didn’t reply to the list with it earlier:
/graph.php?type=multiport_bits&id=95517,95694,95716,95532,95431,95459,95359&legend=no&from=1404479636&to=1404566036&width=480&height=100
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.com http://www.CustodianDC.com From: observium [mailto:observium-bounces@observium.org] On Behalf Of Robert Williams Sent: 05 July 2014 13:54 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi - I can answer this as he's not around today.
The graph is the 'Custom_Traffic' user buildable graph on the main page, which isn't clickable so I can't give a URL for it specifically, however it is configured with:
$config['frontpage']['custom_traffic']['ids'] = "95517,95694,95716,95532,95431,95459,95359";
I've tried swapping out those 7 IDs for a single ID of a port/graph on another random device but it always fails to draw the graph, as per image below. I also tried renaming the graph (and removing the graph’s name completely so it goes to its default name) but still no rendering of the data, although the title is updating just fine ;)
[cid:image001.jpg@01CF986A.200445E0]
SVN is now 5618 - and I believe this is the only broken graph so all the others are working fine now.
Since it isn’t clickable I can’t even get the diagnostics for you about how it is trying to build the graph I’m afraid.
I also tried <url>/debug but the debug entries for the homepage do not include how that particular graph is generated, so I’m still stuck.
Any pointers most welcome!
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.commailto:Robert@CustodianDC.com http://www.CustodianDC.com
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 05 July 2014 00:50 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
What is the graph's URL?
On 2014-07-04 03:20, Mahomed Hussein wrote:
Hi Tom
They are the custom graphs on the main page. My colleague even tried
changing “$config['frontpage']['custom_traffic']['ids']” to only have
one port and it didn’t draw, and also tried a completely different
port with no change.
How do I check what type of graph it is so I can more accurately
answer your question?
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 03 July 2014 18:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote:
Hi,
having the same problem here with the custom_traffic graphs on the
frontpage since version 5585.
Seems they are broken starting with version 5585 - I'm getting an
"Error Drawing Graphs"
The graphs in version 5584 are working fine
regards,
Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This
Month” graph is working, but the custom graphs at the bottom (second
screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches
(TP-Link) are not drawing either. I’ve tried enabling debug on the
page, but I’m not sure if anything from the output will be useful.
Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 13:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not
stop working.
Apparently polling is failing, this is a totally different (and more
important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped
working today after updating to r5588. I'm now at r5590 and doesn't
seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein
<Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the
first email) but not the graphs in the second screenshot. All the
graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can
tell me I can check it.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 11:12
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening
only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein
<Mahomed@custodiandc.commailto:Mahomed@custodiandc.com> wrote:
Hi
I wonder if someone can help point me in the right direction as to how
I can fix an issue with graphs not drawing. We updated to 0.14.6.5588
this morning and I’ve noticed that some graphs are not drawing. We
haven’t had any issues with the server and it has been up for 49 days.
I’m not sure where to start. So far I’ve tried another SVN update (in
case there was a quick fix) and rebooted the server (out of
desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance
for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.commailto:Mahomed@CustodianDC.com
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________
observium mailing list
observium@observium.orgmailto:observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Put &debug=1 on the end of the graph URL.
multiport_bits is working ok for me.
adam.
On 2014-07-05 09:59, Robert Williams wrote:
Hi,
Also here is the URL by the way, just realised I didn’t reply to the list with it earlier:
/graph.php?type=multiport_bits&id=95517,95694,95716,95532,95431,95459,95359&legend=no&from=1404479636&to=1404566036&width=480&height=100 [1]
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.com http://www.CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Robert Williams SENT: 05 July 2014 13:54 TO: Observium Network Observation System SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi - I can answer this as he's not around today.
The graph is the 'Custom_Traffic' user buildable graph on the main page, which isn't clickable so I can't give a URL for it specifically, however it is configured with:
$config['frontpage']['custom_traffic']['ids'] = "95517,95694,95716,95532,95431,95459,95359";
I've tried swapping out those 7 IDs for a single ID of a port/graph on another random device but it always fails to draw the graph, as per image below. I also tried renaming the graph (and removing the graph’s name completely so it goes to its default name) but still no rendering of the data, although the title is updating just fine ;)
SVN is now 5618 - and I believe this is the only broken graph so all the others are working fine now.
Since it isn’t clickable I can’t even get the diagnostics for you about how it is trying to build the graph I’m afraid.
I also tried <url>/debug but the debug entries for the homepage do not include how that particular graph is generated, so I’m still stuck.
Any pointers most welcome!
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.com http://www.CustodianDC.com [2]
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 05 July 2014 00:50 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
What is the graph's URL?
On 2014-07-04 03:20, Mahomed Hussein wrote:
Hi Tom
They are the custom graphs on the main page. My colleague even tried
changing “$config['frontpage']['custom_traffic']['ids']” to only have
one port and it didn’t draw, and also tried a completely different
port with no change.
How do I check what type of graph it is so I can more accurately
answer your question?
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 03 July 2014 18:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote:
Hi,
having the same problem here with the custom_traffic graphs on the
frontpage since version 5585.
Seems they are broken starting with version 5585 - I'm getting an
"Error Drawing Graphs"
The graphs in version 5584 are working fine
regards,
Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This
Month” graph is working, but the custom graphs at the bottom (second
screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches
(TP-Link) are not drawing either. I’ve tried enabling debug on the
page, but I’m not sure if anything from the output will be useful.
Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2] [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 13:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not
stop working.
Apparently polling is failing, this is a totally different (and more
important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped
working today after updating to r5588. I'm now at r5590 and doesn't
seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein
Mahomed@custodiandc.com wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the
first email) but not the graphs in the second screenshot. All the
graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can
tell me I can check it.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2] [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 11:12
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening
only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein
Mahomed@custodiandc.com wrote:
Hi
I wonder if someone can help point me in the right direction as to how
I can fix an issue with graphs not drawing. We updated to 0.14.6.5588
this morning and I’ve noticed that some graphs are not drawing. We
haven’t had any issues with the server and it has been up for 49 days.
I’m not sure where to start. So far I’ve tried another SVN update (in
case there was a quick fix) and rebooted the server (out of
desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance
for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2] [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3]
[2] http://www.CustodianDC.com [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3]
Links:
[1] http://postman.memetic.org/graph.php?type=multiport_bits&id=95517,95694,... [2] http://www.CustodianDC.com [3] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Adam
Below is the output of the debug.
-------------------------------------------------------
$varsSELECT * FROM `entity_permissions` WHERE `user_id` = '9'
string(56) SELECT `value` FROM `users_prefs` WHERE `user_id` = '9' AND `pref` = 'atom_key' string(79) array(50=>multiport_bitstype=>multiport1=>multiportsubtype=>bits2=>bits) Key: integer string(14) Key: string(4) string(9) Key: string(7) string(4) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95517' AND I.device_id = D.device_id string(116) SELECT * FROM `devices` WHERE `device_id` = '' string(46) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95694' AND I.device_id = D.device_id string(116) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95716' AND I.device_id = D.device_id string(116) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95532' AND I.device_id = D.device_id string(116) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95431' AND I.device_id = D.device_id string(116) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95459' AND I.device_id = D.device_id string(116) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95359' AND I.device_id = D.device_id string(116) graph /tmp/xaNE2g2xRf8gfNBD.png -g --alt-autoscale --rigid -E --start 1404479636 --end 1404566036 --width 480 --height 100 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal
command returned 0 (OK u:0.00 s:0.00 r:0.00 )
OK u:0.02 s:0.00 r:0.02 graph /tmp/xaNE2g2xRf8gfNBD.png -g --alt-autoscale --rigid -E --start 1404479636 --end 1404566036 --width 480 --height 100 -c BACK#EEEEEE00 -c SHADEA#EEEEEE00 -c SHADEB#EEEEEE00 -c FONT#000000 -c CANVAS#FFFFFF00 -c GRID#a5a5a5 -c MGRID#FF9999 -c FRAME#5e5e5e -c ARROW#5e5e5e -R normal -c CANVAS#FFBBBB --font LEGEND:8:'DejaVuSansMono' --font AXIS:7:'DejaVuSansMono' --font-render-mode normal HRULE:0#555555 --title='Error Drawing Graph'
command returned 0 (561x157 )
Runtime 0.09738302230835 secs
------------------------------------------
Let me know if you need any other info. Thanks.
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 05 July 2014 16:15 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Put &debug=1 on the end of the graph URL.
multiport_bits is working ok for me.
adam.
On 2014-07-05 09:59, Robert Williams wrote:
Hi,
Also here is the URL by the way, just realised I didn’t reply to the list with it earlier:
/graph.php?type=multiport_bits&id=95517,95694,95716,95532,95431,95459, 95359&legend=no&from=1404479636&to=1404566036&width=480&height=100 [1]
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.com http://www.CustodianDC.com
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Robert Williams SENT: 05 July 2014 13:54 TO: Observium Network Observation System SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi - I can answer this as he's not around today.
The graph is the 'Custom_Traffic' user buildable graph on the main page, which isn't clickable so I can't give a URL for it specifically, however it is configured with:
$config['frontpage']['custom_traffic']['ids'] = "95517,95694,95716,95532,95431,95459,95359";
I've tried swapping out those 7 IDs for a single ID of a port/graph on another random device but it always fails to draw the graph, as per image below. I also tried renaming the graph (and removing the graph’s name completely so it goes to its default name) but still no rendering of the data, although the title is updating just fine ;)
SVN is now 5618 - and I believe this is the only broken graph so all the others are working fine now.
Since it isn’t clickable I can’t even get the diagnostics for you about how it is trying to build the graph I’m afraid.
I also tried <url>/debug but the debug entries for the homepage do not include how that particular graph is generated, so I’m still stuck.
Any pointers most welcome!
Cheers,
Robert Williams Custodian Data Centre Email: Robert@CustodianDC.com http://www.CustodianDC.com [2]
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 05 July 2014 00:50 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
What is the graph's URL?
On 2014-07-04 03:20, Mahomed Hussein wrote:
Hi Tom
They are the custom graphs on the main page. My colleague even tried
changing “$config['frontpage']['custom_traffic']['ids']” to only have
one port and it didn’t draw, and also tried a completely different
port with no change.
How do I check what type of graph it is so I can more accurately
answer your question?
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 03 July 2014 18:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
What type of graphs are these?
Tom
On 02/07/2014 12:09, Thomas Klein wrote:
Hi,
having the same problem here with the custom_traffic graphs on the
frontpage since version 5585.
Seems they are broken starting with version 5585 - I'm getting an
"Error Drawing Graphs"
The graphs in version 5584 are working fine
regards,
Thomas
Am 02.07.2014 11:33, schrieb Mahomed Hussein:
Hi Tom
We’ve updated to 5605 and the “Overall Transit & Peering Traffic This
Month” graph is working, but the custom graphs at the bottom (second
screenshot on my original email) are not drawing.
On further investigation, the memory graphs on some of our switches
(TP-Link) are not drawing either. I’ve tried enabling debug on the
page, but I’m not sure if anything from the output will be useful.
Please let me know what info you need and I’ll get it for you. Thanks.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2] [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 13:38
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
5591 should fix this.
Tom
On 07/01/2014 02:22 PM, Tom Laermans wrote:
Hm!
It's important to note that the graph is not broken, and it did not
stop working.
Apparently polling is failing, this is a totally different (and more
important) issue!
Looking at it right now.
Tom
On 07/01/2014 12:58 PM, Chip Pleasants wrote:
I'm not sure if its related but all my server storage graphs stopped
working today after updating to r5588. I'm now at r5590 and doesn't
seem to help.
-Chip
On Tue, Jul 1, 2014 at 6:47 AM, Mahomed Hussein
Mahomed@custodiandc.com wrote:
Hi Tom
5590 fixes the top graph on the main page (my first screenshot in the
first email) but not the graphs in the second screenshot. All the
graphs work in 5584.
I don’t know how to check what type of graph it is, but if you can
tell me I can check it.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2] [2]
FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF
Tom Laermans
SENT: 01 July 2014 11:12
TO: Observium Network Observation System
SUBJECT: Re: [Observium] Graphs not drawing after latest update
Hi,
That is useful info!
multiport_bits_duo_separate fixed in r5589.
Tom
On 07/01/2014 11:51 AM, Senses0 wrote:
I noticed the same after upgrading to this version. This is happening
only to "multiport_bits_duo_separate" graph types
On Tue, Jul 1, 2014 at 2:41 PM, Mahomed Hussein
Mahomed@custodiandc.com wrote:
Hi
I wonder if someone can help point me in the right direction as to how
I can fix an issue with graphs not drawing. We updated to 0.14.6.5588
this morning and I’ve noticed that some graphs are not drawing. We
haven’t had any issues with the server and it has been up for 49 days.
I’m not sure where to start. So far I’ve tried another SVN update (in
case there was a quick fix) and rebooted the server (out of
desperation/hope more than anything else).
Please let me know if you require any other info. Thanks in advance
for any assistance.
A couple of screenshots are below.
Kind regards,
Mahomed Hussein
Custodian Data Centre
Email: Mahomed@CustodianDC.com
http://www.CustodianDC.com [2] [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3] [1]
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3]
[2] http://www.CustodianDC.com [2]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3]
observium mailing list
observium@observium.org
http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [3]
Links:
[1] http://postman.memetic.org/graph.php?type=multiport_bits&id=95517, 95694,95716,95532,95431,95459,95359&legend=no&from=1404479636& amp;to=1404566036&width=480&height=100 [2] http://www.CustodianDC.com [3] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I saw the same thing this morning. Patch submitted. http://jira.observium.org/browse/OBSERVIUM-902 -- Cameron Moore
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mahomed Hussein Sent: Sunday, July 06, 2014 2:17 AM To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi Adam
Below is the output of the debug.
-------------------------------------------------------
$varsSELECT * FROM `entity_permissions` WHERE `user_id` = '9'
string(56) SELECT `value` FROM `users_prefs` WHERE `user_id` = '9' AND `pref` = 'atom_key' string(79) array(50=>multiport_bitstype=>multiport1=>multiportsubtype=>bits2=>bits) Key: integer string(14) Key: string(4) string(9) Key: string(7) string(4) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95517' AND I.device_id = D.device_id string(116) SELECT * FROM `devices` WHERE `device_id` = ''
<snip>
working perfect in 5626.
thanks, Thomas
Am 07.07.2014 18:14, schrieb Moore, Cameron:
I saw the same thing this morning. Patch submitted. http://jira.observium.org/browse/OBSERVIUM-902
Cameron Moore
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mahomed Hussein Sent: Sunday, July 06, 2014 2:17 AM To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi Adam
Below is the output of the debug.
$varsSELECT * FROM `entity_permissions` WHERE `user_id` = '9'
string(56) SELECT `value` FROM `users_prefs` WHERE `user_id` = '9' AND `pref` = 'atom_key' string(79) array(50=>multiport_bitstype=>multiport1=>multiportsubtype=>bits2=>bits) Key: integer string(14) Key: string(4) string(9) Key: string(7) string(4) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95517' AND I.device_id = D.device_id string(116) SELECT * FROM `devices` WHERE `device_id` = ''
<snip> _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thank you! It's working now :)
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Moore, Cameron Sent: 07 July 2014 17:14 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
I saw the same thing this morning. Patch submitted. http://jira.observium.org/browse/OBSERVIUM-902 -- Cameron Moore
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mahomed Hussein Sent: Sunday, July 06, 2014 2:17 AM To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
Hi Adam
Below is the output of the debug.
-------------------------------------------------------
$varsSELECT * FROM `entity_permissions` WHERE `user_id` = '9'
string(56) SELECT `value` FROM `users_prefs` WHERE `user_id` = '9' AND `pref` = 'atom_key' string(79) array(50=>multiport_bitstype=>multiport1=>multiportsubtype=>bits2=>bits) Key: integer string(14) Key: string(4) string(9) Key: string(7) string(4) SELECT `ifIndex`, `hostname` FROM `ports` AS I, devices as D WHERE I.port_id = '95517' AND I.device_id = D.device_id string(116) SELECT * FROM `devices` WHERE `device_id` = ''
<snip> _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
On 2014-07-01 04:41, Mahomed Hussein wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
BTW, rebooting will never fix anything in these instances.
It will give you ugly gaps in your graphs, though :)
adam.
I knew rebooting wouldn't fix it, hence I said it was done out of desperation. The windows engineer in me made me do it!
Kind regards,
Mahomed Hussein Custodian Data Centre Email: Mahomed@CustodianDC.com http://www.CustodianDC.com
-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: 03 July 2014 18:56 To: Observium Network Observation System Subject: Re: [Observium] Graphs not drawing after latest update
On 2014-07-01 04:41, Mahomed Hussein wrote:
Hi
I wonder if someone can help point me in the right direction as to how I can fix an issue with graphs not drawing. We updated to 0.14.6.5588 this morning and I’ve noticed that some graphs are not drawing. We haven’t had any issues with the server and it has been up for 49 days. I’m not sure where to start. So far I’ve tried another SVN update (in case there was a quick fix) and rebooted the server (out of desperation/hope more than anything else).
BTW, rebooting will never fix anything in these instances.
It will give you ugly gaps in your graphs, though :)
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (9)
-
Adam Armstrong -
Chip Pleasants -
Franjo Posavec -
Mahomed Hussein -
Moore, Cameron -
Robert Williams -
Senses0 -
Thomas Klein -
Tom Laermans