Re: [Observium] Starline Busway Monitoring
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong adama@memetic.org wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross david.ross@salesforce.com wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium observium@observium.org wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium observium@observium.org wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium observium@observium.org wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium observium@observium.org wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html [2] http://www.bluemail.me/r?b=14063
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail
On 4 Jan 2019, 18:46, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong adama@memetic.org wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there,
but I
can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could
be
added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross
wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks.
Pleas
let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium observium@observium.org wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium observium@observium.org wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium observium@observium.org wrote:
Hi,
It's not actually possible to just add mibs to a directory. You
need
to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium observium@observium.org wrote:
Hello!
I sent this question yesterday but got no response. Please reply
as
soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise;
thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1]
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063 On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com>
wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1]
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
From: observium observium-bounces@observium.org On Behalf Of David Ross via observium Sent: 04 January 2019 21:42 To: Adam Armstrong adama@memetic.org Cc: David Ross david.ross@salesforce.com; Observium observium@observium.org Subject: Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com mailto:david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong <adama@memetic.org mailto:adama@memetic.org > wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross <david.ross@salesforce.com mailto:david.ross@salesforce.com > wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com mailto:david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org mailto:adama@memetic.org > wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com mailto:david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com mailto:david.ross@salesforce.com > wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com mailto:david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org mailto:observium@observium.org > wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org mailto:observium@observium.org > wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org mailto:observium@observium.org > wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org mailto:observium@observium.org > wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com mailto:david.ross@salesforce.com
[1]
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html [2] http://www.bluemail.me/r?b=14063
Yes, I do; I can send it to you Monday morning.
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium < observium@observium.org> wrote:
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
*From:* observium observium-bounces@observium.org *On Behalf Of *David Ross via observium *Sent:* 04 January 2019 21:42 *To:* Adam Armstrong adama@memetic.org *Cc:* David Ross david.ross@salesforce.com; Observium < observium@observium.org> *Subject:* Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com> wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:45 PM David Ross david.ross@salesforce.com wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium < observium@observium.org> wrote:
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
*From:* observium observium-bounces@observium.org *On Behalf Of *David Ross via observium *Sent:* 04 January 2019 21:42 *To:* Adam Armstrong adama@memetic.org *Cc:* David Ross david.ross@salesforce.com; Observium < observium@observium.org> *Subject:* Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com>
wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Mon, Jan 7, 2019 at 12:05 PM David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:45 PM David Ross david.ross@salesforce.com wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium < observium@observium.org> wrote:
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
*From:* observium observium-bounces@observium.org *On Behalf Of *David Ross via observium *Sent:* 04 January 2019 21:42 *To:* Adam Armstrong adama@memetic.org *Cc:* David Ross david.ross@salesforce.com; Observium < observium@observium.org> *Subject:* Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com>
wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1]
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello again, Adam!
Is there any update on this?
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Tue, Jan 22, 2019 at 9:54 AM David Ross david.ross@salesforce.com wrote:
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Mon, Jan 7, 2019 at 12:05 PM David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:45 PM David Ross david.ross@salesforce.com wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium < observium@observium.org> wrote:
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
*From:* observium observium-bounces@observium.org *On Behalf Of *David Ross via observium *Sent:* 04 January 2019 21:42 *To:* Adam Armstrong adama@memetic.org *Cc:* David Ross david.ross@salesforce.com; Observium < observium@observium.org> *Subject:* Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could
be
added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross <
david.ross@salesforce.com>
wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1]
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi David,
Support for inlets and outlets on this device should be present in r9697 now.
There was no usable data on the per-line metrics, temperature metrics or battery metrics, so I didn't add those.
Thanks, adam. On 2019-01-30 18:44:50, David Ross via observium observium@observium.org wrote: Hello again, Adam!
Is there any update on this?
Thanks!!!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Tue, Jan 22, 2019 at 9:54 AM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Mon, Jan 7, 2019 at 12:05 PM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Fri, Jan 4, 2019 at 4:45 PM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium <observium@observium.org [mailto:observium@observium.org]> wrote:
That worked! Do you have the MIB for these devices from the vendor? Thanks, Adam. From: observium <observium-bounces@observium.org [mailto:observium-bounces@observium.org]> On Behalf Of David Ross via observium Sent: 04 January 2019 21:42 To: Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> Cc: David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]>; Observium <observium@observium.org [mailto:observium@observium.org]> Subject: Re: [Observium] Starline Busway Monitoring No worries; here's the text file version. Thanks!
David W. Ross, Sr. Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> wrote: It should be a plain text file and not an rtf. I'm not sure if the rtf will break things. Adam. Sent from BlueMail [http://www.bluemail.me/r?b=14063] On 4 Jan 2019, at 18:46, David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote: Hello again, Adam! The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format. Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org [mailto:adama@memetic.org]> wrote: Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html [http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] [2] http://www.bluemail.me/r?b=14063 [http://www.bluemail.me/r?b=14063]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello, Adam!
Thanks for the heads up! Is r9697 now available? Also, is there info/data that I could get from the vendor that would allow you to add those metrics?
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Thu, Jan 31, 2019 at 9:03 AM Adam Armstrong via observium < observium@observium.org> wrote:
Hi David,
Support for inlets and outlets on this device should be present in r9697 now.
There was no usable data on the per-line metrics, temperature metrics or battery metrics, so I didn't add those.
Thanks, adam.
On 2019-01-30 18:44:50, David Ross via observium observium@observium.org wrote: Hello again, Adam!
Is there any update on this?
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Tue, Jan 22, 2019 at 9:54 AM David Ross david.ross@salesforce.com wrote:
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Mon, Jan 7, 2019 at 12:05 PM David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:45 PM David Ross david.ross@salesforce.com wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium < observium@observium.org> wrote:
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
*From:* observium observium-bounces@observium.org *On Behalf Of *David Ross via observium *Sent:* 04 January 2019 21:42 *To:* Adam Armstrong adama@memetic.org *Cc:* David Ross david.ross@salesforce.com; Observium < observium@observium.org> *Subject:* Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could
be
added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross <
david.ross@salesforce.com>
wrote:
> Hello, Adam! > > Within the attached text file are the two Starline snmpwalks.
Pleas
> let me know if there is additional information needed. > > Regards, > > David W. Ross, Sr. > Sr. Lab Ops Engineer > > 50 Fremont St, 42nd Floor > > San Francisco, California 94105 > > 415.589.4930 - O > > 415.926.3483 - C > david.ross@salesforce.com > > [1] > > On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium > < observium@observium.org> wrote: > > See the walk commands in the previous mail :> > > adam. > > On 2018-12-02 20:19:49, Darrell Budic via observium > < observium@observium.org> wrote: > > I’m monitoring mine with some custom OIDs, works for what I need. > Would be nice to have them fully supported, I can provide sample > data if it helps someone set that up. > > -Darrell > > On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium > < observium@observium.org> wrote: > > Hi, > > It's not actually possible to just add mibs to a directory. You
need
> to write definition arrays and/or code to support that mib. > > Adam. > > Sent from BlueMail [2] > On 30 Nov 2018, at 19:43, David Ross via observium > < observium@observium.org> wrote: > > Hello! > > I sent this question yesterday but got no response. Please reply
as
> soon as possible. > > I've added monitoring to our Starline Busway CPMs (Critical Power > Meters) and have added latest MIB to the Observium SNMP MIBs > directory. However, I get very little to no monitoring data. Is > the Starline MIB not supported by Observium? Please advise;
thanks!
> > Regards, > > David W. Ross, Sr. > Sr. Lab Ops Engineer > > 50 Fremont St, 42nd Floor > > San Francisco, California 94105 > > 415.589.4930 - O > > 415.926.3483 - C > david.ross@salesforce.com > > [1] > > ------------------------- > > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Links:
[1]
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list
observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello again, Adam!
We're running CE, not PE. Is r9697 available, or must I wait until the next major release?
Thanks!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Thu, Jan 31, 2019 at 9:32 AM David Ross david.ross@salesforce.com wrote:
Hello, Adam!
Thanks for the heads up! Is r9697 now available? Also, is there info/data that I could get from the vendor that would allow you to add those metrics?
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Thu, Jan 31, 2019 at 9:03 AM Adam Armstrong via observium < observium@observium.org> wrote:
Hi David,
Support for inlets and outlets on this device should be present in r9697 now.
There was no usable data on the per-line metrics, temperature metrics or battery metrics, so I didn't add those.
Thanks, adam.
On 2019-01-30 18:44:50, David Ross via observium observium@observium.org wrote: Hello again, Adam!
Is there any update on this?
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Tue, Jan 22, 2019 at 9:54 AM David Ross david.ross@salesforce.com wrote:
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Mon, Jan 7, 2019 at 12:05 PM David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:45 PM David Ross david.ross@salesforce.com wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
*David W. Ross, Sr.* Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium < observium@observium.org> wrote:
That worked!
Do you have the MIB for these devices from the vendor?
Thanks,
Adam.
*From:* observium observium-bounces@observium.org *On Behalf Of *David Ross via observium *Sent:* 04 January 2019 21:42 *To:* Adam Armstrong adama@memetic.org *Cc:* David Ross david.ross@salesforce.com; Observium < observium@observium.org> *Subject:* Re: [Observium] Starline Busway Monitoring
No worries; here's the text file version.
Thanks!
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong adama@memetic.org wrote:
It should be a plain text file and not an rtf.
I'm not sure if the rtf will break things.
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=14063
On 4 Jan 2019, at 18:46, David Ross david.ross@salesforce.com wrote:
Hello again, Adam!
The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format.
Regards,
*David W. Ross, Sr.*
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com
http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html
On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org> wrote:
Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote: > Hello, Adam! > > About a month ago, I sent you snmpwalks for the Starline Critical > Power Meter (CPM), hoping that Observium support for Starline could be > added. Has any progress been made with developing code base? Any > update would be appreciated. > > Regards, > > David W. Ross, Sr. > Sr. Lab Ops Engineer > > 50 Fremont St, 42nd Floor > > San Francisco, California 94105 > > 415.589.4930 - O > > 415.926.3483 - C > david.ross@salesforce.com > > [1] > > On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com> > wrote: > >> Hello, Adam! >> >> Within the attached text file are the two Starline snmpwalks. Pleas >> let me know if there is additional information needed. >> >> Regards, >> >> David W. Ross, Sr. >> Sr. Lab Ops Engineer >> >> 50 Fremont St, 42nd Floor >> >> San Francisco, California 94105 >> >> 415.589.4930 - O >> >> 415.926.3483 - C >> david.ross@salesforce.com >> >> [1] >> >> On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium >> < observium@observium.org> wrote: >> >> See the walk commands in the previous mail :> >> >> adam. >> >> On 2018-12-02 20:19:49, Darrell Budic via observium >> < observium@observium.org> wrote: >> >> I’m monitoring mine with some custom OIDs, works for what I need. >> Would be nice to have them fully supported, I can provide sample >> data if it helps someone set that up. >> >> -Darrell >> >> On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium >> < observium@observium.org> wrote: >> >> Hi, >> >> It's not actually possible to just add mibs to a directory. You need >> to write definition arrays and/or code to support that mib. >> >> Adam. >> >> Sent from BlueMail [2] >> On 30 Nov 2018, at 19:43, David Ross via observium >> < observium@observium.org> wrote: >> >> Hello! >> >> I sent this question yesterday but got no response. Please reply as >> soon as possible. >> >> I've added monitoring to our Starline Busway CPMs (Critical Power >> Meters) and have added latest MIB to the Observium SNMP MIBs >> directory. However, I get very little to no monitoring data. Is >> the Starline MIB not supported by Observium? Please advise; thanks! >> >> Regards, >> >> David W. Ross, Sr. >> Sr. Lab Ops Engineer >> >> 50 Fremont St, 42nd Floor >> >> San Francisco, California 94105 >> >> 415.589.4930 - O >> >> 415.926.3483 - C >> david.ross@salesforce.com >> >> [1] >> >> ------------------------- >> >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > Links: > ------ > [1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html > [2] http://www.bluemail.me/r?b=14063
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list
observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Dude, you were sending me mails every week and you don't even pay us?
... On 2019-01-31 17:49:17, David Ross via observium observium@observium.org wrote: Hello again, Adam!
We're running CE, not PE. Is r9697 available, or must I wait until the next major release?
Thanks!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Thu, Jan 31, 2019 at 9:32 AM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Thanks for the heads up! Is r9697 now available? Also, is there info/data that I could get from the vendor that would allow you to add those metrics?
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Thu, Jan 31, 2019 at 9:03 AM Adam Armstrong via observium <observium@observium.org [mailto:observium@observium.org]> wrote:
Hi David,
Support for inlets and outlets on this device should be present in r9697 now.
There was no usable data on the per-line metrics, temperature metrics or battery metrics, so I didn't add those.
Thanks, adam. On 2019-01-30 18:44:50, David Ross via observium <observium@observium.org [mailto:observium@observium.org]> wrote: Hello again, Adam!
Is there any update on this?
Thanks!!!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Tue, Jan 22, 2019 at 9:54 AM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Mon, Jan 7, 2019 at 12:05 PM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Fri, Jan 4, 2019 at 4:45 PM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium <observium@observium.org [mailto:observium@observium.org]> wrote:
That worked! Do you have the MIB for these devices from the vendor? Thanks, Adam. From: observium <observium-bounces@observium.org [mailto:observium-bounces@observium.org]> On Behalf Of David Ross via observium Sent: 04 January 2019 21:42 To: Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> Cc: David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]>; Observium <observium@observium.org [mailto:observium@observium.org]> Subject: Re: [Observium] Starline Busway Monitoring No worries; here's the text file version. Thanks!
David W. Ross, Sr. Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> wrote: It should be a plain text file and not an rtf. I'm not sure if the rtf will break things. Adam. Sent from BlueMail [http://www.bluemail.me/r?b=14063] On 4 Jan 2019, at 18:46, David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote: Hello again, Adam! The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format. Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org [mailto:adama@memetic.org]> wrote: Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html [http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] [2] http://www.bluemail.me/r?b=14063 [http://www.bluemail.me/r?b=14063]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium] _______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi David,
That data wasn't present in the walk you sent, so I assumed it wasn't present on the model of device you have:
enterprises.uecStarline.cpm.cpmAcMeter.cpmAcOutletLine.cpmAcOutletLineEntry.cpmAcOtlLineCurrent.outlet1.line1 = 9999.99 enterprises.uecStarline.cpm.cpmAcMeter.cpmAcOutletLine.cpmAcOutletLineEntry.cpmAcOtlLineCurrent.outlet1.line2 = 9999.99 enterprises.uecStarline.cpm.cpmAcMeter.cpmAcOutletLine.cpmAcOutletLineEntry.cpmAcOtlLineCurrent.outlet1.line3 = 9999.99 enterprises.uecStarline.cpm.cpmAcMeter.cpmAcOutletLine.cpmAcOutletLineEntry.cpmAcOtlLineCurrent.outlet1.neutral = 9999.99
That revision is the current "rolling" or "trunk" revision. It'll perhaps not be in stable for a while.
adam.
On 2019-01-31 17:33:19, David Ross via observium observium@observium.org wrote: Hello, Adam!
Thanks for the heads up! Is r9697 now available? Also, is there info/data that I could get from the vendor that would allow you to add those metrics?
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Thu, Jan 31, 2019 at 9:03 AM Adam Armstrong via observium <observium@observium.org [mailto:observium@observium.org]> wrote:
Hi David,
Support for inlets and outlets on this device should be present in r9697 now.
There was no usable data on the per-line metrics, temperature metrics or battery metrics, so I didn't add those.
Thanks, adam. On 2019-01-30 18:44:50, David Ross via observium <observium@observium.org [mailto:observium@observium.org]> wrote: Hello again, Adam!
Is there any update on this?
Thanks!!!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Tue, Jan 22, 2019 at 9:54 AM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Is there any update on this? Please let me know if you need more information.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Mon, Jan 7, 2019 at 12:05 PM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello again, Adam!
Attached the vendor MIB for the Starline Busway CPM. Please let me know if you have any questions.
Regards,
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Fri, Jan 4, 2019 at 4:45 PM David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Yes, I do; I can send it to you Monday morning.
Thanks!!!
David W. Ross, Sr.
Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C
david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html]
On Fri, Jan 4, 2019 at 4:41 PM Adam Armstrong via observium <observium@observium.org [mailto:observium@observium.org]> wrote:
That worked! Do you have the MIB for these devices from the vendor? Thanks, Adam. From: observium <observium-bounces@observium.org [mailto:observium-bounces@observium.org]> On Behalf Of David Ross via observium Sent: 04 January 2019 21:42 To: Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> Cc: David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]>; Observium <observium@observium.org [mailto:observium@observium.org]> Subject: Re: [Observium] Starline Busway Monitoring No worries; here's the text file version. Thanks!
David W. Ross, Sr. Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] On Fri, Jan 4, 2019 at 12:16 PM Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> wrote: It should be a plain text file and not an rtf. I'm not sure if the rtf will break things. Adam. Sent from BlueMail [http://www.bluemail.me/r?b=14063] On 4 Jan 2019, at 18:46, David Ross <david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote: Hello again, Adam! The attached file contains two -Obentu format snmpwalks for the Skyline Busway CPM. Please let me know if this walk isn't the correct format. Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer 50 Fremont St, 42nd Floor San Francisco, California 94105 415.589.4930 - O 415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] On Thu, Jan 3, 2019 at 3:06 AM Adam Armstrong < adama@memetic.org [mailto:adama@memetic.org]> wrote: Hi,
These walks are not quite in the correct format, they need to be made with -ObentU
It does look like there are a bunch of sensors and stuff in there, but I can't tell what they are easily in that format. :)
adam.
On 2019-01-02 21:11, David Ross wrote:
Hello, Adam!
About a month ago, I sent you snmpwalks for the Starline Critical Power Meter (CPM), hoping that Observium support for Starline could be added. Has any progress been made with developing code base? Any update would be appreciated.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
On Mon, Dec 3, 2018 at 10:17 AM David Ross < david.ross@salesforce.com [mailto:david.ross@salesforce.com]> wrote:
Hello, Adam!
Within the attached text file are the two Starline snmpwalks. Pleas let me know if there is additional information needed.
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
On Sun, Dec 2, 2018 at 4:51 PM Adam Armstrong via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
See the walk commands in the previous mail :>
adam.
On 2018-12-02 20:19:49, Darrell Budic via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
I’m monitoring mine with some custom OIDs, works for what I need. Would be nice to have them fully supported, I can provide sample data if it helps someone set that up.
-Darrell
On Nov 30, 2018, at 4:22 PM, Adam Armstrong via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
Hi,
It's not actually possible to just add mibs to a directory. You need to write definition arrays and/or code to support that mib.
Adam.
Sent from BlueMail [2] On 30 Nov 2018, at 19:43, David Ross via observium < observium@observium.org [mailto:observium@observium.org]> wrote:
Hello!
I sent this question yesterday but got no response. Please reply as soon as possible.
I've added monitoring to our Starline Busway CPMs (Critical Power Meters) and have added latest MIB to the Observium SNMP MIBs directory. However, I get very little to no monitoring data. Is the Starline MIB not supported by Observium? Please advise; thanks!
Regards,
David W. Ross, Sr. Sr. Lab Ops Engineer
50 Fremont St, 42nd Floor
San Francisco, California 94105
415.589.4930 - O
415.926.3483 - C david.ross@salesforce.com [mailto:david.ross@salesforce.com]
[1]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
Links:
[1] http://smart.salesforce.com/sig/david.ross//us_mb/default/link.html [http://smart.salesforce.com/sig/david.ross/us_mb/default/link.html] [2] http://www.bluemail.me/r?b=14063 [http://www.bluemail.me/r?b=14063]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium] _______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (2)
-
Adam Armstrong
-
David Ross