I've split OmniStack into a separate OS, and it should collect more data now.

Thanks, adam.

Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 17/03/2016 09:38:49, Ivan Biasi ivan.biasi@trentinonetwork.it wrote: Hi Tom

thanks for the fast reply.

The Observium database has not any sql-mode set in config files, the default mode is empty:

_______________________________ mysql> SELECT @@sql_mode; +------------+ | @@sql_mode | +------------+ |            | +------------+ 1 row in set (0.00 sec) _______________________________

About the switch sysObjectId,  here following the info: _______________________________

iso.3.6.1.2.1.1.1.0 = STRING: "OmniStack LS 6200" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.6486.800.1.1.2.2.4.1.1 iso.3.6.1.2.1.1.3.0 = Timeticks: (189007604) 21 days, 21:01:16.04 iso.3.6.1.2.1.1.4.0 = STRING: "Trentino ecc..." iso.3.6.1.2.1.1.5.0 = STRING: "S3 ecc.." iso.3.6.1.2.1.1.6.0 = STRING: "Datacenter ecc..." iso.3.6.1.2.1.1.7.0 = INTEGER: 2 iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.4.1.89.73 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "RS capabilities" _______________________________

The device was discovered some days ago, using the following command, with no particular alert messages ...I hope :-) : add_device.php <switch_name_fqdn> <snmp_community> v2c

Thanks again for your help I.

Da: "Tom Laermans" tom.laermans@powersource.cx A: "Observium Network Observation System" observium@observium.org Inviato: Giovedì, 17 marzo 2016 9:31:57 Oggetto: Re: [Observium] Alcatel OmniStack 6224 --> Aruba device - ArubaOS

Hi Ivan,

Can you tell us the sysObjectId for the device?

Some Alcatel wifi hardware is actually Aruba, something is likely set a bit too wide so it catches non-wifi stuff as Aruba too.

As to why it's not discovered, I'm not sure. It should discover just fine - however if discovery breaks before it's finished, it won't update the last_discovered field, and then you keep getting that message.

Try running discovery on the device by hand and see if something is failing. Make sure your MySQL is -not- set to strict mode.

Tom

On 17/03/2016 08:57, Ivan Biasi wrote:

Hi Adam and all I'm trying Observium in a test environment, using some different network devices, and I found the following issue. The Alcatel OmniStack 6224 switch is reported by Observium as an Aruba device running ArubaOS. Selecting it on the GUI, the following banner appears: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes." ...but devices was added some days ago. Here enclosed a picture to better understand the problem. Is the Alcatel 6224 switch unsupported/partially supported, or there are some configuration issues to identify and solve? Thanks a lot, regards Ivan.

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

--

ing. Biasi Ivan Area Ingegneria di Rete Direzione Servizi e Reti

TRENTINO NETWORK S.R.L. Via G.Pedrotti, 18 – 38121 - TRENTO Tel  : (+39) 0461.020222 Fax  : (+39) 0461.020201 Email: ivan.biasi@trentinonetwork.it

________________________________________________________________________________

Società soggetta a direzione e controllo da parte della Provincia Autonoma di Trento. REG. IMP. C.F. e P. IVA 01904880224 ________________________________________________________________________________

CONFIDENZIALE: Questo messaggio e gli eventuali allegati sono confidenziali e riservati. Se vi è stato recapitato per errore e non siete fra i destinatari elencati, siete pregati di darne immediatamente avviso al mittente. Le informazioni contenute non devono essere mostrate ad altri, nè utilizzate, memorizzate o copiate in qualsiasi forma. CONFIDENTIAL: This e-mail and any attachments to it may be confidential and may contain private and confidential information. If you are not the intended recipient of this email please notify the sender immediately. Moreover, you must not disclose or distribute its contents to anyone nor copy, store or use its contents in any way.

do :

./discovery.php -h <hostname> -d >> debug.txt

and send me debug.txt

adam.

Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 17/03/2016 13:37:26, Ivan Biasi ivan.biasi@trentinonetwork.it wrote: Hi Adam

thanks for your interest on the issue.

Likewise, another kind of device we're using on our evaluating platform present similar issue, without the vendor mismatch.

The HP J9726A 2920-24G Switch will be detected correctly as HP device on the main panel, but selectig it with the GUI present on top the banner: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes."

Here below the sysObjectId of that model:

iso.3.6.1.2.1.1.1.0 = STRING: "HP J9726A 2920-24G Switch, revision WB.15.13.0003, ROM WB.15.05 (/ws/swbuildm/rel_laredo_qaoff/code/build/anm(swbuildm_rel_laredo_qaoff_rel_laredo)) (Formerly ProCurve)" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.11.2.3.7.11.152 iso.3.6.1.2.1.1.3.0 = Timeticks: (1943314994) 224 days, 22:05:49.94 iso.3.6.1.2.1.1.4.0 = STRING: "Trentino ..." iso.3.6.1.2.1.1.5.0 = STRING: "s1..." iso.3.6.1.2.1.1.6.0 = STRING: "Datacenter..." iso.3.6.1.2.1.1.7.0 = INTEGER: 74 iso.3.6.1.2.1.2.1.0 = INTEGER: 38 iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1 iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2

Could you help me please? Thanks again Ivan.

Da: "Adam Armstrong" adama@memetic.org A: observium@observium.org Inviato: Giovedì, 17 marzo 2016 12:27:34 Oggetto: Re: [Observium] Alcatel OmniStack 6224 --> Aruba device - ArubaOS

I've split OmniStack into a separate OS, and it should collect more data now.

Thanks, adam.

Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 17/03/2016 09:38:49, Ivan Biasi ivan.biasi@trentinonetwork.it wrote: Hi Tom

thanks for the fast reply.

The Observium database has not any sql-mode set in config files, the default mode is empty:

_______________________________ mysql> SELECT @@sql_mode; +------------+ | @@sql_mode | +------------+ |            | +------------+ 1 row in set (0.00 sec) _______________________________

About the switch sysObjectId,  here following the info: _______________________________

iso.3.6.1.2.1.1.1.0 = STRING: "OmniStack LS 6200" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.6486.800.1.1.2.2.4.1.1 iso.3.6.1.2.1.1.3.0 = Timeticks: (189007604) 21 days, 21:01:16.04 iso.3.6.1.2.1.1.4.0 = STRING: "Trentino ecc..." iso.3.6.1.2.1.1.5.0 = STRING: "S3 ecc.." iso.3.6.1.2.1.1.6.0 = STRING: "Datacenter ecc..." iso.3.6.1.2.1.1.7.0 = INTEGER: 2 iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.4.1.89.73 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "RS capabilities" _______________________________

The device was discovered some days ago, using the following command, with no particular alert messages ...I hope :-) : add_device.php <switch_name_fqdn> <snmp_community> v2c

Thanks again for your help I.

Da: "Tom Laermans" tom.laermans@powersource.cx A: "Observium Network Observation System" observium@observium.org Inviato: Giovedì, 17 marzo 2016 9:31:57 Oggetto: Re: [Observium] Alcatel OmniStack 6224 --> Aruba device - ArubaOS

Hi Ivan,

Can you tell us the sysObjectId for the device?

Some Alcatel wifi hardware is actually Aruba, something is likely set a bit too wide so it catches non-wifi stuff as Aruba too.

As to why it's not discovered, I'm not sure. It should discover just fine - however if discovery breaks before it's finished, it won't update the last_discovered field, and then you keep getting that message.

Try running discovery on the device by hand and see if something is failing. Make sure your MySQL is -not- set to strict mode.

Tom

On 17/03/2016 08:57, Ivan Biasi wrote:

Hi Adam and all I'm trying Observium in a test environment, using some different network devices, and I found the following issue. The Alcatel OmniStack 6224 switch is reported by Observium as an Aruba device running ArubaOS. Selecting it on the GUI, the following banner appears: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes." ...but devices was added some days ago. Here enclosed a picture to better understand the problem. Is the Alcatel 6224 switch unsupported/partially supported, or there are some configuration issues to identify and solve? Thanks a lot, regards Ivan.

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]

In about 5 months :)

adam.

Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 17/03/2016 14:30:38, Ivan Biasi ivan.biasi@trentinonetwork.it wrote: Hi Adam

it was enough to run again the discovery against both the HP J9726A 2920-24G Switches I use, to solve their incomplete acquisition, thanks. That's a little bit strange, maybe it's related to the discovery mode I used for them the first time. I ran the discovery with a host-file, not individually host by host. Anyhow, now it's ok. (Tell me if you're still interested in the debug file)

About the Alcatel 6224 devices, when will be available the next community release, in order to upgrade and try a new discovery also for them ?

Thanks for your work, kind regards Ivan.

Da: "Adam Armstrong" adama@memetic.org A: observium@observium.org Inviato: Giovedì, 17 marzo 2016 14:44:59 Oggetto: Re: [Observium] Alcatel OmniStack 6224 --> Aruba device - ArubaOS

do :

./discovery.php -h <hostname> -d >> debug.txt

and send me debug.txt

adam.

Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 17/03/2016 13:37:26, Ivan Biasi ivan.biasi@trentinonetwork.it wrote: Hi Adam

thanks for your interest on the issue.

Likewise, another kind of device we're using on our evaluating platform present similar issue, without the vendor mismatch.

The HP J9726A 2920-24G Switch will be detected correctly as HP device on the main panel, but selectig it with the GUI present on top the banner: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes."

Here below the sysObjectId of that model:

iso.3.6.1.2.1.1.1.0 = STRING: "HP J9726A 2920-24G Switch, revision WB.15.13.0003, ROM WB.15.05 (/ws/swbuildm/rel_laredo_qaoff/code/build/anm(swbuildm_rel_laredo_qaoff_rel_laredo)) (Formerly ProCurve)" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.11.2.3.7.11.152 iso.3.6.1.2.1.1.3.0 = Timeticks: (1943314994) 224 days, 22:05:49.94 iso.3.6.1.2.1.1.4.0 = STRING: "Trentino ..." iso.3.6.1.2.1.1.5.0 = STRING: "s1..." iso.3.6.1.2.1.1.6.0 = STRING: "Datacenter..." iso.3.6.1.2.1.1.7.0 = INTEGER: 74 iso.3.6.1.2.1.2.1.0 = INTEGER: 38 iso.3.6.1.2.1.2.2.1.1.1 = INTEGER: 1 iso.3.6.1.2.1.2.2.1.1.2 = INTEGER: 2

Could you help me please? Thanks again Ivan.

Da: "Adam Armstrong" adama@memetic.org A: observium@observium.org Inviato: Giovedì, 17 marzo 2016 12:27:34 Oggetto: Re: [Observium] Alcatel OmniStack 6224 --> Aruba device - ArubaOS

I've split OmniStack into a separate OS, and it should collect more data now.

Thanks, adam.

Sent from Mailbird [http://www.getmailbird.com/?utm_source=Mailbird&utm_medium=email&utm...] On 17/03/2016 09:38:49, Ivan Biasi ivan.biasi@trentinonetwork.it wrote: Hi Tom

thanks for the fast reply.

The Observium database has not any sql-mode set in config files, the default mode is empty:

_______________________________ mysql> SELECT @@sql_mode; +------------+ | @@sql_mode | +------------+ |            | +------------+ 1 row in set (0.00 sec) _______________________________

About the switch sysObjectId,  here following the info: _______________________________

iso.3.6.1.2.1.1.1.0 = STRING: "OmniStack LS 6200" iso.3.6.1.2.1.1.2.0 = OID: iso.3.6.1.4.1.6486.800.1.1.2.2.4.1.1 iso.3.6.1.2.1.1.3.0 = Timeticks: (189007604) 21 days, 21:01:16.04 iso.3.6.1.2.1.1.4.0 = STRING: "Trentino ecc..." iso.3.6.1.2.1.1.5.0 = STRING: "S3 ecc.." iso.3.6.1.2.1.1.6.0 = STRING: "Datacenter ecc..." iso.3.6.1.2.1.1.7.0 = INTEGER: 2 iso.3.6.1.2.1.1.8.0 = Timeticks: (0) 0:00:00.00 iso.3.6.1.2.1.1.9.1.2.1 = OID: iso.3.6.1.4.1.89.73 iso.3.6.1.2.1.1.9.1.3.1 = STRING: "RS capabilities" _______________________________

The device was discovered some days ago, using the following command, with no particular alert messages ...I hope :-) : add_device.php <switch_name_fqdn> <snmp_community> v2c

Thanks again for your help I.

Da: "Tom Laermans" tom.laermans@powersource.cx A: "Observium Network Observation System" observium@observium.org Inviato: Giovedì, 17 marzo 2016 9:31:57 Oggetto: Re: [Observium] Alcatel OmniStack 6224 --> Aruba device - ArubaOS

Hi Ivan,

Can you tell us the sysObjectId for the device?

Some Alcatel wifi hardware is actually Aruba, something is likely set a bit too wide so it catches non-wifi stuff as Aruba too.

As to why it's not discovered, I'm not sure. It should discover just fine - however if discovery breaks before it's finished, it won't update the last_discovered field, and then you keep getting that message.

Try running discovery on the device by hand and see if something is failing. Make sure your MySQL is -not- set to strict mode.

Tom

On 17/03/2016 08:57, Ivan Biasi wrote:

Hi Adam and all I'm trying Observium in a test environment, using some different network devices, and I found the following issue. The Alcatel OmniStack 6224 switch is reported by Observium as an Aruba device running ArubaOS. Selecting it on the GUI, the following banner appears: "Device not yet discovered This device has not yet been successfully discovered. System information and statistics will not be populated and graphs will not draw. This device should be automatically discovered within 10 minutes." ...but devices was added some days ago. Here enclosed a picture to better understand the problem. Is the Alcatel 6224 switch unsupported/partially supported, or there are some configuration issues to identify and solve? Thanks a lot, regards Ivan.

_______________________________________________ observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]