More Observium integrations with rancid
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright robbie@siuslawbroadband.com wrote:
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 10:20 AM, Derek dandenoth@gmail.com wrote:
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Anyone else have any insight into how the Observium script generates router.db for devices other than Mikrotik?
Also trying to setup a cron job to regenerate the router.db file. Does this look about right to kick the script off every morning at 3am?
* 3 * * * php /opt/observium/scripts/generate-rancid.php > /var/lib/rancid/observium/router.db
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 4:20 PM, Robbie Wright robbie@siuslawbroadband.com wrote:
Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 10:20 AM, Derek dandenoth@gmail.com wrote:
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
That will run the script every minute from 3:00 until 3:59. You may want to specify a minute in the first field.
Other than that, it looks fine :)
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 29 September 2015 03:21:51 Robbie Wright robbie@siuslawbroadband.com wrote:
Anyone else have any insight into how the Observium script generates router.db for devices other than Mikrotik?
Also trying to setup a cron job to regenerate the router.db file. Does this look about right to kick the script off every morning at 3am?
- 3 * * * php /opt/observium/scripts/generate-rancid.php >
/var/lib/rancid/observium/router.db
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 4:20 PM, Robbie Wright robbie@siuslawbroadband.com wrote:
Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 10:20 AM, Derek dandenoth@gmail.com wrote:
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thanks Adam, I caught that right after I sent the email too.
Any insight into how the Observium script generates the router.db file? Right now, it is only populated with our Mikrotik gear. How do we get the Observium script to add in some of our Cisco equipment and others?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Mon, Sep 28, 2015 at 5:37 PM, Adam Armstrong adama@observium.org wrote:
That will run the script every minute from 3:00 until 3:59. You may want to specify a minute in the first field.
Other than that, it looks fine :)
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 29 September 2015 03:21:51 Robbie Wright robbie@siuslawbroadband.com wrote:
Anyone else have any insight into how the Observium script generates router.db for devices other than Mikrotik?
Also trying to setup a cron job to regenerate the router.db file. Does this look about right to kick the script off every morning at 3am?
- 3 * * * php /opt/observium/scripts/generate-rancid.php >
/var/lib/rancid/observium/router.db
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 4:20 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 10:20 AM, Derek dandenoth@gmail.com wrote:
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit.
Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Err, if it doesn't add cisco, something is very wrong here? :-)
What kind of OS type are your ciscos?
Observium uses a mapping array from observium-os to rancid-os, if it is set, it will write it to the configuration. But for Cisco this is there by default.
For non-standard devices such as Vyatta you need to add a mapping to the config like this:
$config['rancid']['os_map']['dnos6'] = 'dell';
Where 'dnos6' is the OS as known in Observium, and 'dell' the OS as known to RANCID.
Tom
On 29/09/2015 21:11, Robbie Wright wrote:
Thanks Adam, I caught that right after I sent the email too.
Any insight into how the Observium script generates the router.db file? Right now, it is only populated with our Mikrotik gear. How do we get the Observium script to add in some of our Cisco equipment and others?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Mon, Sep 28, 2015 at 5:37 PM, Adam Armstrong <adama@observium.org mailto:adama@observium.org> wrote:
That will run the script every minute from 3:00 until 3:59. You may want to specify a minute in the first field. Other than that, it looks fine :) Adam. Sent with AquaMail for Android http://www.aqua-mail.com On 29 September 2015 03:21:51 Robbie Wright <robbie@siuslawbroadband.com <mailto:robbie@siuslawbroadband.com>> wrote:Anyone else have any insight into how the Observium script generates router.db for devices other than Mikrotik? Also trying to setup a cron job to regenerate the router.db file. Does this look about right to kick the script off every morning at 3am? * 3 * * * php /opt/observium/scripts/generate-rancid.php > /var/lib/rancid/observium/router.db Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101 <tel:541-902-5101> On Fri, Sep 25, 2015 at 4:20 PM, Robbie Wright <robbie@siuslawbroadband.com <mailto:robbie@siuslawbroadband.com>> wrote: Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it. Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101 <tel:541-902-5101> On Fri, Sep 25, 2015 at 10:20 AM, Derek <dandenoth@gmail.com <mailto:dandenoth@gmail.com>> wrote: Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files. On Fri, Sep 25, 2015 at 12:14 PM, Derek <dandenoth@gmail.com <mailto:dandenoth@gmail.com>> wrote: This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file. Derek On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright <robbie@siuslawbroadband.com <mailto:robbie@siuslawbroadband.com>> wrote: So we've got rancid integration working (thanks Adam and others) in Observium for all of our Mikrotik devices and it is working great. We've got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get hooked up with rancid as well, but the Observium integration confuses me a bit. Do we edit the cloginrc file with the info for how to log into EdgeRouters? I would have assumed we would normally use a different group to tell rancid how to pull config's but everything is just in the Observium group. How does everyone setup rancid to pull down more than one equipment manufacturer's gear? Has anyone pulled config's through rancid into Observium from EdgeRouters? Robbie Wright Siuslaw Broadband <https://siuslawbroadband.com> 541-902-5101 <tel:541-902-5101> _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org <mailto:observium%40observium.org> http://postman.memetic. org/cgi-bin/mailman/listinfo/ observium <http://postman.memetic.org/cgi-bin/mailman/listinfo/observium>_______________________________________________ observium mailing list observium@observium.org <mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
There is a config variable which maps Observium os field values to rancid's os string.
You just need to add new values to that.
It should be easy to find grepping rancid out of the defaults.inc.php :)
You can add extra values to the array in your config.php.
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 29 September 2015 20:11:45 Robbie Wright robbie@siuslawbroadband.com wrote:
Thanks Adam, I caught that right after I sent the email too.
Any insight into how the Observium script generates the router.db file? Right now, it is only populated with our Mikrotik gear. How do we get the Observium script to add in some of our Cisco equipment and others?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Mon, Sep 28, 2015 at 5:37 PM, Adam Armstrong adama@observium.org wrote:
That will run the script every minute from 3:00 until 3:59. You may want to specify a minute in the first field.
Other than that, it looks fine :)
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 29 September 2015 03:21:51 Robbie Wright robbie@siuslawbroadband.com wrote:
Anyone else have any insight into how the Observium script generates router.db for devices other than Mikrotik?
Also trying to setup a cron job to regenerate the router.db file. Does this look about right to kick the script off every morning at 3am?
- 3 * * * php /opt/observium/scripts/generate-rancid.php >
/var/lib/rancid/observium/router.db
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 4:20 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 10:20 AM, Derek dandenoth@gmail.com wrote:
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
This is probably more of a RANCID question than an Observium one. Once you get your configs back from Rancid, Observium just looks for the host name and matches that. In rancid, you'll add the device to your router.db file, like "routeros.domain.com:vyatta:up". You'll have a "vlogin" file which will do the work of connecting and pulling the config, and if they have different credentials then other vendor gear, specify it in your .cloginrc file.
Derek
On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
> So we've got rancid integration working (thanks Adam and others) in > Observium for all of our Mikrotik devices and it is working great. We've > got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get > hooked up with rancid as well, but the Observium integration confuses me a > bit. > > Do we edit the cloginrc file with the info for how to log into > EdgeRouters? I would have assumed we would normally use a different group > to tell rancid how to pull config's but everything is just in the Observium > group. How does everyone setup rancid to pull down more than one equipment > manufacturer's gear? Has anyone pulled config's through rancid into > Observium from EdgeRouters? > > Robbie Wright > Siuslaw Broadband https://siuslawbroadband.com > 541-902-5101 > > _______________________________________________ > observium mailing list > observium@observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > >
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thanks Adam and Tom. I'll hack around with both of those things later this week.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Wed, Sep 30, 2015 at 2:02 AM, Adam Armstrong adama@observium.org wrote:
Hi,
There is a config variable which maps Observium os field values to rancid's os string.
You just need to add new values to that.
It should be easy to find grepping rancid out of the defaults.inc.php :)
You can add extra values to the array in your config.php.
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 29 September 2015 20:11:45 Robbie Wright robbie@siuslawbroadband.com wrote:
Thanks Adam, I caught that right after I sent the email too.
Any insight into how the Observium script generates the router.db file? Right now, it is only populated with our Mikrotik gear. How do we get the Observium script to add in some of our Cisco equipment and others?
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Mon, Sep 28, 2015 at 5:37 PM, Adam Armstrong adama@observium.org wrote:
That will run the script every minute from 3:00 until 3:59. You may want to specify a minute in the first field.
Other than that, it looks fine :)
Adam.
Sent with AquaMail for Android http://www.aqua-mail.com
On 29 September 2015 03:21:51 Robbie Wright robbie@siuslawbroadband.com wrote:
Anyone else have any insight into how the Observium script generates router.db for devices other than Mikrotik?
Also trying to setup a cron job to regenerate the router.db file. Does this look about right to kick the script off every morning at 3am?
- 3 * * * php /opt/observium/scripts/generate-rancid.php >
/var/lib/rancid/observium/router.db
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 4:20 PM, Robbie Wright < robbie@siuslawbroadband.com> wrote:
Correct, I would lean towards this being more of a rancid issue that Observium, but I'm struggling with the routerdb file since it is created by the Observium script and it only includes our Mikrotik devices. Not sure out to get the Observium script to add more devices than just the MT's to it.
Robbie Wright Siuslaw Broadband https://siuslawbroadband.com 541-902-5101
On Fri, Sep 25, 2015 at 10:20 AM, Derek dandenoth@gmail.com wrote:
Oh yeah, Vyatta support isn't there out of the box with rancid, so you should pay a visit to https://bitbucket.org/aquerubin/rancid-vyatta to get the needed files.
On Fri, Sep 25, 2015 at 12:14 PM, Derek dandenoth@gmail.com wrote:
> This is probably more of a RANCID question than an Observium one. > Once you get your configs back from Rancid, Observium just looks for the > host name and matches that. In rancid, you'll add the device to your > router.db file, like "routeros.domain.com:vyatta:up". You'll have a > "vlogin" file which will do the work of connecting and pulling the config, > and if they have different credentials then other vendor gear, specify it > in your .cloginrc file. > > Derek > > On Thu, Sep 24, 2015 at 4:35 PM, Robbie Wright < > robbie@siuslawbroadband.com> wrote: > >> So we've got rancid integration working (thanks Adam and others) in >> Observium for all of our Mikrotik devices and it is working great. We've >> got a few Ubiquiti EdgeRouters (based on Vyatta) that we'd like to get >> hooked up with rancid as well, but the Observium integration confuses me a >> bit. >> >> Do we edit the cloginrc file with the info for how to log into >> EdgeRouters? I would have assumed we would normally use a different group >> to tell rancid how to pull config's but everything is just in the Observium >> group. How does everyone setup rancid to pull down more than one equipment >> manufacturer's gear? Has anyone pulled config's through rancid into >> Observium from EdgeRouters? >> >> Robbie Wright >> Siuslaw Broadband https://siuslawbroadband.com >> 541-902-5101 >> >> _______________________________________________ >> observium mailing list >> observium@observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (4)
-
Adam Armstrong -
Derek -
Robbie Wright -
Tom Laermans