Alerts not working

newer
(no subject)

older
howto control ports

Patrick Marquetecken

23 Mar 2015 23 Mar '15

2:35 p.m.

I'm trying to get my alerts working but until now without success.

I have put a server down, and i know some systems have a disk that is full about 80%

I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker

and created some alert according to the examples, and run the regenerate.

Test mails are successfully send from the command line.

but no luck, can anyone please advice on this matter?

Show replies by date

Joseph L. Brunner

23 Mar 23 Mar

2:40 p.m.

Have you enabled windows snmp services / linux snmp services?

How have you checked?

I followed those exact ones - and it worked for me

You can set a threshold like 20 so all disks will fire right away for testing

Have you confirmed on the regenerate page the alert was linked to your machine?

-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken Sent: Monday, March 23, 2015 9:35 AM To: Observium Network Observation System Subject: [Observium] Alerts not working

I'm trying to get my alerts working but until now without success.

I have put a server down, and i know some systems have a disk that is full about 80%

I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker

and created some alert according to the examples, and run the regenerate.

Test mails are successfully send from the command line.

but no luck, can anyone please advice on this matter? _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Patrick Marquetecken

2:57 p.m.

Hi Joseph,

Linux snmp service is enabled on all servers

I have change the threshold to 10% ->(harde schijf 70%)

The regenerate page shows:

Building alerts for device proxy-01:

Checkers matching this device:

Machine down High CPU Probleem Harde schijf 70% Algemene error Traffic exceeds 85% Memory usage is above 70%

Matching entities:

proxy-01 Machine down Common KVM processor High CPU Common KVM processor High CPU Average High CPU / Harde schijf 70% /dev/shm Harde schijf 70% /boot Harde schijf 70% eth0 Traffic exceeds 85% Physical memory Memory usage is above 70% Virtual memory Memory usage is above 70% Memory buffers Memory usage is above 70% Cached memory Memory usage is above 70% Swap space Memory usage is above 70%

Checking for stale entries:

The test

php ./alerter.php -h proxy-01 -sddm DEBUG! Observium 0.15.3.6343 Alerter

Starting alerter run:

SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[7] RUNTIME[0.00220299s] Cached 7 alert rules.

SQL[SELECT * FROM `alert_assoc`] ROWS[7] RUNTIME[0.00097108s]

SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'proxy-01' ORDER BY `device_id` ASC] ROWS[1] RUNTIME[0.00099182s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '8'] ROWS[1] RUNTIME[0.00130296s] Processing alerts for proxy-01

SQL[SELECT *,`alert_table`.`alert_table_id` AS `alert_table_id` FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8'] ROWS[0] RUNTIME[0.00115013s]

SQL[SELECT * FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8' AND `alert_status` IS NOT NULL;] ROWS[0] RUNTIME[0.00107503s]

Joseph L. Brunner schreef op 23/03/15 om 14:40:

...

Have you enabled windows snmp services / linux snmp services?

How have you checked?

I followed those exact ones - and it worked for me

You can set a threshold like 20 so all disks will fire right away for testing

Have you confirmed on the regenerate page the alert was linked to your machine?

-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken Sent: Monday, March 23, 2015 9:35 AM To: Observium Network Observation System Subject: [Observium] Alerts not working

I'm trying to get my alerts working but until now without success.

I have put a server down, and i know some systems have a disk that is full about 80%

I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker

and created some alert according to the examples, and run the regenerate.

Test mails are successfully send from the command line.

but no luck, can anyone please advice on this matter? _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Joseph L. Brunner

3:08 p.m.

Sure your smtp server sends otherwise in the config.php?

We had some issues with that being our problem in the early days last year of switching to observium

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken Sent: Monday, March 23, 2015 9:57 AM To: observium@observium.org Subject: Re: [Observium] Alerts not working

Hi Joseph,

Linux snmp service is enabled on all servers

I have change the threshold to 10% ->(harde schijf 70%)

The regenerate page shows:

Building alerts for device proxy-01: Checkers matching this device: Machine down High CPU Probleem Harde schijf 70% Algemene error Traffic exceeds 85% Memory usage is above 70% Matching entities: proxy-01 Machine down Common KVM processor High CPU Common KVM processor High CPU Average High CPU / Harde schijf 70% /dev/shm Harde schijf 70% /boot Harde schijf 70% eth0 Traffic exceeds 85% Physical memory Memory usage is above 70% Virtual memory Memory usage is above 70% Memory buffers Memory usage is above 70% Cached memory Memory usage is above 70% Swap space Memory usage is above 70%

Checking for stale entries:

The test

php ./alerter.php -h proxy-01 -sddm DEBUG! Observium 0.15.3.6343 Alerter

Starting alerter run:

SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[7] RUNTIME[0.00220299s] Cached 7 alert rules.

SQL[SELECT * FROM `alert_assoc`] ROWS[7] RUNTIME[0.00097108s]

SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'proxy-01' ORDER BY `device_id` ASC] ROWS[1] RUNTIME[0.00099182s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '8'] ROWS[1] RUNTIME[0.00130296s] Processing alerts for proxy-01

Joseph L. Brunner schreef op 23/03/15 om 14:40:

Have you enabled windows snmp services / linux snmp services?

How have you checked?

I followed those exact ones - and it worked for me

You can set a threshold like 20 so all disks will fire right away for testing

Have you confirmed on the regenerate page the alert was linked to your machine?

-----Original Message-----

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken

Sent: Monday, March 23, 2015 9:35 AM

To: Observium Network Observation System

Subject: [Observium] Alerts not working

I'm trying to get my alerts working but until now without success.

I have put a server down, and i know some systems have a disk that is full about 80%

I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker

and created some alert according to the examples, and run the regenerate.

Test mails are successfully send from the command line.

but no luck, can anyone please advice on this matter?

_______________________________________________

observium mailing list

observium@observium.orgmailto:observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

_______________________________________________

observium mailing list

observium@observium.orgmailto:observium@observium.org

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Patrick Marquetecken

3:23 p.m.

Joseph,

I have done a tcpdump on the observium server, and when sending out test mail I see traffic towards my mailserver . Running php ./alerter.php -h proxy-01 -sddm does nog generate anytraffic

So for some reason there are no alerts generated, or at least mails send out.

Joseph L. Brunner schreef op 23/03/15 om 15:08:

...

Sure your smtp server sends otherwise in the config.php?

We had some issues with that being our problem in the early days last year of switching to observium

*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Patrick Marquetecken *Sent:* Monday, March 23, 2015 9:57 AM *To:* observium@observium.org *Subject:* Re: [Observium] Alerts not working

Hi Joseph,

Linux snmp service is enabled on all servers

I have change the threshold to 10% ->(harde schijf 70%)

The regenerate page shows:
    Building alerts for device proxy-01:


      Checkers matching this device:
*Machine down* *High CPU* *Probleem* *Harde schijf 70%* *Algemene error* *Traffic exceeds 85%* *Memory usage is above 70%*
      Matching entities:
*proxy-01* *Machine down* *Common KVM processor* *High CPU* *Common KVM processor* *High CPU* *Average* *High CPU* */* *Harde schijf 70%* */dev/shm* *Harde schijf 70%* */boot* *Harde schijf 70%* *eth0* *Traffic exceeds 85%* *Physical memory* *Memory usage is above 70%* *Virtual memory* *Memory usage is above 70%* *Memory buffers* *Memory usage is above 70%* *Cached memory* *Memory usage is above 70%* *Swap space* *Memory usage is above 70%*
      Checking for stale entries:
The test

php ./alerter.php -h proxy-01 -sddm DEBUG! Observium 0.15.3.6343 Alerter

Starting alerter run:

SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[7] RUNTIME[0.00220299s] Cached 7 alert rules.

SQL[SELECT * FROM `alert_assoc`] ROWS[7] RUNTIME[0.00097108s]

SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'proxy-01' ORDER BY `device_id` ASC] ROWS[1] RUNTIME[0.00099182s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '8'] ROWS[1] RUNTIME[0.00130296s] Processing alerts for proxy-01

SQL[SELECT *,`alert_table`.`alert_table_id` AS `alert_table_id` FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8'] ROWS[0] RUNTIME[0.00115013s]

SQL[SELECT * FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8' AND `alert_status` IS NOT NULL;] ROWS[0] RUNTIME[0.00107503s]

Joseph L. Brunner schreef op 23/03/15 om 14:40:
Have you enabled windows snmp services / linux snmp services?



How have you checked?



I followed those exact ones  - and it worked for me



You can set a threshold like 20 so all disks will fire right away for testing



Have you confirmed on the regenerate page the alert was linked to your machine?



-----Original Message-----

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken

Sent: Monday, March 23, 2015 9:35 AM

To: Observium Network Observation System

Subject: [Observium] Alerts not working



I'm trying to get my alerts working but until now without success.



I have put a server down, and i know some systems have a disk that is full about 80%



I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker



and created some alert according to the examples, and run the regenerate.



Test mails are successfully send from the command line.





but no luck, can anyone please advice on this matter?

_______________________________________________

observium mailing list

observium@observium.org <mailto:observium@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium





_______________________________________________

observium mailing list

observium@observium.org <mailto:observium@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Patrick Marquetecken

24 Mar 24 Mar

7:53 a.m.

anyone over there with some ideas, a monitoring program without alert is not really usefull :-(

Patrick Marquetecken schreef op 23/03/15 om 15:23:

...

Joseph,

I have done a tcpdump on the observium server, and when sending out test mail I see traffic towards my mailserver . Running php ./alerter.php -h proxy-01 -sddm does nog generate anytraffic

So for some reason there are no alerts generated, or at least mails send out.

Joseph L. Brunner schreef op 23/03/15 om 15:08:

...
Sure your smtp server sends otherwise in the config.php?

We had some issues with that being our problem in the early days last year of switching to observium

*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Patrick Marquetecken *Sent:* Monday, March 23, 2015 9:57 AM *To:* observium@observium.org *Subject:* Re: [Observium] Alerts not working

Hi Joseph,

Linux snmp service is enabled on all servers

I have change the threshold to 10% ->(harde schijf 70%)

The regenerate page shows:
    Building alerts for device proxy-01:


      Checkers matching this device:
*Machine down* *High CPU* *Probleem* *Harde schijf 70%* *Algemene error* *Traffic exceeds 85%* *Memory usage is above 70%*
      Matching entities:
*proxy-01* *Machine down* *Common KVM processor* *High CPU* *Common KVM processor* *High CPU* *Average* *High CPU* */* *Harde schijf 70%* */dev/shm* *Harde schijf 70%* */boot* *Harde schijf 70%* *eth0* *Traffic exceeds 85%* *Physical memory* *Memory usage is above 70%* *Virtual memory* *Memory usage is above 70%* *Memory buffers* *Memory usage is above 70%* *Cached memory* *Memory usage is above 70%* *Swap space* *Memory usage is above 70%*
      Checking for stale entries:
The test

php ./alerter.php -h proxy-01 -sddm DEBUG! Observium 0.15.3.6343 Alerter

Starting alerter run:

SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[7] RUNTIME[0.00220299s] Cached 7 alert rules.

SQL[SELECT * FROM `alert_assoc`] ROWS[7] RUNTIME[0.00097108s]

SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'proxy-01' ORDER BY `device_id` ASC] ROWS[1] RUNTIME[0.00099182s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '8'] ROWS[1] RUNTIME[0.00130296s] Processing alerts for proxy-01

SQL[SELECT *,`alert_table`.`alert_table_id` AS `alert_table_id` FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8'] ROWS[0] RUNTIME[0.00115013s]

SQL[SELECT * FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8' AND `alert_status` IS NOT NULL;] ROWS[0] RUNTIME[0.00107503s]

Joseph L. Brunner schreef op 23/03/15 om 14:40:
Have you enabled windows snmp services / linux snmp services?



How have you checked?



I followed those exact ones  - and it worked for me



You can set a threshold like 20 so all disks will fire right away for testing



Have you confirmed on the regenerate page the alert was linked to your machine?



-----Original Message-----

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken

Sent: Monday, March 23, 2015 9:35 AM

To: Observium Network Observation System

Subject: [Observium] Alerts not working



I'm trying to get my alerts working but until now without success.



I have put a server down, and i know some systems have a disk that is full about 80%



I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker



and created some alert according to the examples, and run the regenerate.



Test mails are successfully send from the command line.





but no luck, can anyone please advice on this matter?

_______________________________________________

observium mailing list

observium@observium.org <mailto:observium@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium





_______________________________________________

observium mailing list

observium@observium.org <mailto:observium@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

Laurens Vets

25 Mar 25 Mar

1:45 a.m.

Patrick,

Also ask your question on IRC, there's usually a dev or 2 there as well.

On 2015-03-23 23:53, Patrick Marquetecken wrote:

...

anyone over there with some ideas, a monitoring program without alert is not really usefull :-(

Patrick Marquetecken schreef op 23/03/15 om 15:23:

...
Joseph,

I have done a tcpdump on the observium server, and when sending out test mail I see traffic towards my mailserver . Running php ./alerter.php -h proxy-01 -sddm does nog generate anytraffic

So for some reason there are no alerts generated, or at least mails send out.

Joseph L. Brunner schreef op 23/03/15 om 15:08:

...
Sure your smtp server sends otherwise in the config.php?

We had some issues with that being our problem in the early days last year of switching to observium

FROM: observium [mailto:observium-bounces@observium.org] ON BEHALF OF Patrick Marquetecken SENT: Monday, March 23, 2015 9:57 AM TO: observium@observium.org SUBJECT: Re: [Observium] Alerts not working

Hi Joseph,

Linux snmp service is enabled on all servers

I have change the threshold to 10% ->(harde schijf 70%)

The regenerate page shows:

BUILDING ALERTS FOR DEVICE PROXY-01:

CHECKERS MATCHING THIS DEVICE:

MACHINE DOWN HIGH CPU PROBLEEM HARDE SCHIJF 70% ALGEMENE ERROR TRAFFIC EXCEEDS 85% MEMORY USAGE IS ABOVE 70%

MATCHING ENTITIES:

PROXY-01 MACHINE DOWN COMMON KVM PROCESSOR HIGH CPU COMMON KVM PROCESSOR HIGH CPU AVERAGE HIGH CPU / HARDE SCHIJF 70% /DEV/SHM HARDE SCHIJF 70% /BOOT HARDE SCHIJF 70% ETH0 TRAFFIC EXCEEDS 85% PHYSICAL MEMORY MEMORY USAGE IS ABOVE 70% VIRTUAL MEMORY MEMORY USAGE IS ABOVE 70% MEMORY BUFFERS MEMORY USAGE IS ABOVE 70% CACHED MEMORY MEMORY USAGE IS ABOVE 70% SWAP SPACE MEMORY USAGE IS ABOVE 70%

CHECKING FOR STALE ENTRIES:

The test

php ./alerter.php -h proxy-01 -sddm DEBUG! Observium 0.15.3.6343 Alerter

Starting alerter run:

SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[7] RUNTIME[0.00220299s] Cached 7 alert rules.

SQL[SELECT * FROM `alert_assoc`] ROWS[7] RUNTIME[0.00097108s]

SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'proxy-01' ORDER BY `device_id` ASC] ROWS[1] RUNTIME[0.00099182s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '8'] ROWS[1] RUNTIME[0.00130296s] Processing alerts for proxy-01

SQL[SELECT *,`alert_table`.`alert_table_id` AS `alert_table_id` FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8'] ROWS[0] RUNTIME[0.00115013s]

SQL[SELECT * FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8' AND `alert_status` IS NOT NULL;] ROWS[0] RUNTIME[0.00107503s]

Joseph L. Brunner schreef op 23/03/15 om 14:40:

...
Have you enabled windows snmp services / linux snmp services?

How have you checked?

I followed those exact ones - and it worked for me

You can set a threshold like 20 so all disks will fire right away for testing

Have you confirmed on the regenerate page the alert was linked to your machine?

-----Original Message-----

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken

Sent: Monday, March 23, 2015 9:35 AM

To: Observium Network Observation System

Subject: [Observium] Alerts not working

I'm trying to get my alerts working but until now without success.

I have put a server down, and i know some systems have a disk that is full about 80%

I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker [1]

and created some alert according to the examples, and run the regenerate.

Test mails are successfully send from the command line.

but no luck, can anyone please advice on this matter?

Patrick Marquetecken

24 Mar 24 Mar

11:21 a.m.

All,

I have done some digging around and see in the database that the table alert_table-state stays empty, is this normal ?

With each run of a alert check would there be not an update of lasted_checked ?

Thanks

Patrick Marquetecken schreef op 23/03/15 om 15:23:

...

Joseph,

I have done a tcpdump on the observium server, and when sending out test mail I see traffic towards my mailserver . Running php ./alerter.php -h proxy-01 -sddm does nog generate anytraffic

So for some reason there are no alerts generated, or at least mails send out.

Joseph L. Brunner schreef op 23/03/15 om 15:08:

...
Sure your smtp server sends otherwise in the config.php?

We had some issues with that being our problem in the early days last year of switching to observium

*From:*observium [mailto:observium-bounces@observium.org] *On Behalf Of *Patrick Marquetecken *Sent:* Monday, March 23, 2015 9:57 AM *To:* observium@observium.org *Subject:* Re: [Observium] Alerts not working

Hi Joseph,

Linux snmp service is enabled on all servers

I have change the threshold to 10% ->(harde schijf 70%)

The regenerate page shows:
    Building alerts for device proxy-01:


      Checkers matching this device:
*Machine down* *High CPU* *Probleem* *Harde schijf 70%* *Algemene error* *Traffic exceeds 85%* *Memory usage is above 70%*
      Matching entities:
*proxy-01* *Machine down* *Common KVM processor* *High CPU* *Common KVM processor* *High CPU* *Average* *High CPU* */* *Harde schijf 70%* */dev/shm* *Harde schijf 70%* */boot* *Harde schijf 70%* *eth0* *Traffic exceeds 85%* *Physical memory* *Memory usage is above 70%* *Virtual memory* *Memory usage is above 70%* *Memory buffers* *Memory usage is above 70%* *Cached memory* *Memory usage is above 70%* *Swap space* *Memory usage is above 70%*
      Checking for stale entries:
The test

php ./alerter.php -h proxy-01 -sddm DEBUG! Observium 0.15.3.6343 Alerter

Starting alerter run:

SQL[SELECT * FROM `alert_tests` WHERE 1] ROWS[7] RUNTIME[0.00220299s] Cached 7 alert rules.

SQL[SELECT * FROM `alert_assoc`] ROWS[7] RUNTIME[0.00097108s]

SQL[SELECT `device_id` FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'proxy-01' ORDER BY `device_id` ASC] ROWS[1] RUNTIME[0.00099182s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '8'] ROWS[1] RUNTIME[0.00130296s] Processing alerts for proxy-01

SQL[SELECT *,`alert_table`.`alert_table_id` AS `alert_table_id` FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8'] ROWS[0] RUNTIME[0.00115013s]

SQL[SELECT * FROM `alert_table` LEFT JOIN `alert_table-state` ON `alert_table`.`alert_table_id` = `alert_table-state`.`alert_table_id` WHERE `device_id` = '8' AND `alert_status` IS NOT NULL;] ROWS[0] RUNTIME[0.00107503s]

Joseph L. Brunner schreef op 23/03/15 om 14:40:
Have you enabled windows snmp services / linux snmp services?



How have you checked?



I followed those exact ones  - and it worked for me



You can set a threshold like 20 so all disks will fire right away for testing



Have you confirmed on the regenerate page the alert was linked to your machine?



-----Original Message-----

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Patrick Marquetecken

Sent: Monday, March 23, 2015 9:35 AM

To: Observium Network Observation System

Subject: [Observium] Alerts not working



I'm trying to get my alerts working but until now without success.



I have put a server down, and i know some systems have a disk that is full about 80%



I have followed the http://www.observium.org/wiki/Creating_an_Alert_Checker



and created some alert according to the examples, and run the regenerate.



Test mails are successfully send from the command line.





but no luck, can anyone please advice on this matter?

_______________________________________________

observium mailing list

observium@observium.org <mailto:observium@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium





_______________________________________________

observium mailing list

observium@observium.org <mailto:observium@observium.org>

http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3728

Age (days ago)

3730

Last active (days ago)

List overview

Download

7 comments

3 participants

tags (0)

participants (3)

Joseph L. Brunner
Laurens Vets
Patrick Marquetecken