Cisco 2900 Router VRF display Issue
Hi,
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers. I have removed and added the router back but that did not seem to change anything. All of other information appears to be displaying and rancid is pulling the configuration without any issues. Has anyone run into this? The 2900 is running IOS ver. 15.0(1)M3.
Tim
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
The configuration value can be an array of entries.
adam.
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
http://www.observium.org/wiki/Configuration_Options#Rancid
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I have tried setting up the array, as follows;
$config['rancid_configs'][] = array("/usr/local/rancid/var/corenetwork/configs/", "/usr/local/rancid/var/branchnetwork/configs/", "/usr/local/rancid/var/voicenetwork/configs/", "/usr/local/rancid/var/drnetwork/configs/");
However it still does not seem to be pulling the configs, I also tried using single quote as well with not affect. If I use just a single path like below it works for the devices in that directory.
$config['rancid_configs'][] = "/usr/local/rancid/var/corenetwork/configs/";
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:04 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
http://www.observium.org/wiki/Configuration_Options#Rancid
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
The [] on the end of the variable signifies an entry in the 'rancid_configs' array.
You need to replicate the entire line, each time with a different directory.
The difference between " and ' is that things within "" are prarsed by PHP to expand variables, in this instance it makes no difference and you should use ' as it's slightly quicker.
adam
On 02/08/2012 15:20, Moermond, Timothy wrote:
I have tried setting up the array, as follows;
$config['rancid_configs'][] = array("/usr/local/rancid/var/corenetwork/configs/", "/usr/local/rancid/var/branchnetwork/configs/", "/usr/local/rancid/var/voicenetwork/configs/", "/usr/local/rancid/var/drnetwork/configs/");
However it still does not seem to be pulling the configs, I also tried using single quote as well with not affect. If I use just a single path like below it works for the devices in that directory.
$config['rancid_configs'][] = "/usr/local/rancid/var/corenetwork/configs/";
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:04 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
http://www.observium.org/wiki/Configuration_Options#Rancid
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thank you Adam, that did it, I know it was off topic from the subject, do you have any ideas on the VRF?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:22 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
The [] on the end of the variable signifies an entry in the 'rancid_configs' array.
You need to replicate the entire line, each time with a different directory.
The difference between " and ' is that things within "" are prarsed by PHP to expand variables, in this instance it makes no difference and you should use ' as it's slightly quicker.
adam
On 02/08/2012 15:20, Moermond, Timothy wrote:
I have tried setting up the array, as follows;
$config['rancid_configs'][] = array("/usr/local/rancid/var/corenetwork/configs/", "/usr/local/rancid/var/branchnetwork/configs/", "/usr/local/rancid/var/voicenetwork/configs/", "/usr/local/rancid/var/drnetwork/configs/");
However it still does not seem to be pulling the configs, I also tried using single quote as well with not affect. If I use just a single path like below it works for the devices in that directory.
$config['rancid_configs'][] = "/usr/local/rancid/var/corenetwork/configs/";
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:04 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
http://www.observium.org/wiki/Configuration_Options#Rancid
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers
involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Probably related to cisco randomly removing snmp features based on the direction of the wind and how many vowel sounds are in the day.
adam.
On 02/08/2012 15:37, Moermond, Timothy wrote:
Thank you Adam, that did it, I know it was off topic from the subject, do you have any ideas on the VRF?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:22 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
The [] on the end of the variable signifies an entry in the 'rancid_configs' array.
You need to replicate the entire line, each time with a different directory.
The difference between " and ' is that things within "" are prarsed by PHP to expand variables, in this instance it makes no difference and you should use ' as it's slightly quicker.
adam
On 02/08/2012 15:20, Moermond, Timothy wrote:
I have tried setting up the array, as follows;
$config['rancid_configs'][] = array("/usr/local/rancid/var/corenetwork/configs/", "/usr/local/rancid/var/branchnetwork/configs/", "/usr/local/rancid/var/voicenetwork/configs/", "/usr/local/rancid/var/drnetwork/configs/");
However it still does not seem to be pulling the configs, I also tried using single quote as well with not affect. If I use just a single path like below it works for the devices in that directory.
$config['rancid_configs'][] = "/usr/local/rancid/var/corenetwork/configs/";
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 9:04 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
http://www.observium.org/wiki/Configuration_Options#Rancid
On 02/08/2012 14:40, Moermond, Timothy wrote:
I discovered the issue, I have multiple directory groups in rancid, can the location in the config.php file for the rancid directory contain multiple entries or can there be multiple rancid location entries?
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: Thursday, August 02, 2012 8:29 AM To: Observium Network Observation System Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
All we do is check if there is a file in the rancid directory with the hostname of the router, nothing complex is done.
Your filename DOES NOT MATCH. Check again.
adam.
On 02/08/2012 14:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers
involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Check if files are in same case, that's common mistake :)
On 02/08/12 17:14, Moermond, Timothy wrote:
Hi Tom,
I have double checked and the name is the same. It is the only device the config doesn't show up on the tabs.
Tim
-----Original Message----- From: observium-bounces@observium.org [mailto:observium-bounces@observium.org] On Behalf Of Tom Laermans Sent: Thursday, August 02, 2012 8:07 AM To: observium@observium.org Subject: Re: [Observium] Cisco 2900 Router VRF display Issue
Hi Timothy,
On Thu, 2012-08-02 at 08:05 -0500, Moermond, Timothy wrote:
I have situation where Observium shows VRF information for all of my 2800 series routers but not my 2900 series router. Also the config tab is not showing up either from the rancid integration, but it does for all of my 2800 series routers.
I cannot comment on the VRF issue (probably an IOS "feature"), but the rancid integration is a simple as comparing your rancid hostnames to observium hostnames. No device type or model numbers involved...
Tom
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (4)
-
Adam Armstrong -
Moermond, Timothy -
Nikolay Shopik -
Tom Laermans