Dear Sir,
I Successfully install Observium at my office but i can not add my Device on Observium for monitoring . Here all are Cisco Device and I checked that snmpwalk is working. I can ping my all cisco device by name when try to add by cli command and also from GUI but the given error message shown: Could not ping dhanmondi.
It may be mentioned here that, i checked everything as per this command: Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] But still same error message shown.
I also check it : vi config.php and add the following part. $config['fping'] = "/usr/sbin/fping";
but can not find fping file/folder to this location /usr/sbin .
Therefore you are requested to provide me instruction step by step for solving this problem. See the bellow message for your kind information.
root@Observium:/opt/observium# ping dhanmondi PING dhanmondi.mblbd.com (192.168.102.2) 56(84) bytes of data.
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=1 ttl=252 time=1.87 ms 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=2 ttl=252 time=2.03 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=3 ttl=252 time=1.96 ms ^C --- dhanmondi.mblbd.com ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 1.872/1.956/2.038/0.084 ms root@Observium:/opt/observium#
root@Observium:/opt/observium# ./addhost.php dhanmondi (my snmp communicty) v2c
Could not ping dhanmondi Could not ping dhanmondi
Observium v0.13.6.4140 Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
Auth, Priv : ./addhost.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|dsa] [port] [ud p|udp6|tcp|tcp6] Remember to run discovery for the host afterwards.
root@Observium:/opt/observium#
Waiting for your quick step by step instruction for solving my problem.