Your hostname is dhanmondi.mblbd.com
Observium uses FQDN
GRTNX, RobJE
On Jun 9, 2013 6:20 PM, "Muhammad Alihyder Bhuiyan" < alihyder_cse@hotmail.com> wrote:
Dear Sir,
I Successfully install Observium at my office but i can not add my Device
on Observium for monitoring . Here all are Cisco Device and I checked that snmpwalk is working. I can ping my all cisco device by name when try to add by cli command and also from GUI but the given error message shown: Could not ping dhanmondi.
It may be mentioned here that, i checked everything as per this command:
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] But still same error message shown.
I also check it : vi config.php and add the following part. $config['fping'] = "/usr/sbin/fping";
but can not find fping file/folder to this location /usr/sbin .
Therefore you are requested to provide me instruction step by step for
solving this problem. See the bellow message for your kind information.
root@Observium:/opt/observium# ping dhanmondi PING dhanmondi.mblbd.com (192.168.102.2) 56(84) bytes of data. 64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=1 ttl=252
time=1.87 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=2 ttl=252
time=2.03 ms
64 bytes from dhanmondi.mblbd.com (192.168.102.2): icmp_req=3 ttl=252
time=1.96 ms
^C --- dhanmondi.mblbd.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2003ms rtt min/avg/max/mdev = 1.872/1.956/2.038/0.084 ms root@Observium:/opt/observium#
root@Observium:/opt/observium# ./addhost.php dhanmondi (my snmp
communicty) v2c
Could not ping dhanmondi Could not ping dhanmondi
Observium v0.13.6.4140 Add Host Tool
Usage (SNMPv1/2c): ./addhost.php <hostname> [community] [v1|v2c] [port]
[udp|udp6|tcp|tcp6]
Usage (SNMPv3) : Config Defaults : ./addhost.php <hostname> any v3
[user] [port] [udp|udp6|tcp|tcp6]
No Auth, No Priv : ./addhost.php <hostname> nanp v3
[user] [port] [udp|udp6|tcp|tcp6]
Auth, No Priv : ./addhost.php <hostname> anp v3
<user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6]
Auth, Priv : ./addhost.php <hostname> ap v3
<user> <password> <enckey> [md5|sha] [aes|dsa] [port] [ud p|udp6|tcp|tcp6]
Remember to run discovery for the host afterwards.
root@Observium:/opt/observium#
Waiting for your quick step by step instruction for solving my problem.
-- Thanks &
Warm Regards.
============================= Engr. Md. Alihyder Bhuiyan ( B.Sc. Engg. in CSE, CCNA, MCSA ) Executive Officer (Networking) IT Division, Head Office Mercantile Bank Limited. Level-7, Sun Moon Star Tower 37 Dilkusha C/A, Dhaka-1000 Tel : +88 02 7113714, 7113717, 7110020, Ext: 517 Mob : +88 01191 001 606 +88 01552 444 262 +88 01611 001 606
From: rob_vanhooren@mac.com Date: Sat, 8 Jun 2013 20:31:57 -0400 To: observium@observium.org Subject: [Observium] backend DB
curious whether anyone's farted around with using MariaDB or *gasp*
PostgreSQL for their install.
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium