Dunno, what was the actual graph command?
Adam.
Sent from BlueMail
On 13 Jul 2017, 15:13, at 15:13, John Klasa John.Klasa@itiviti.com wrote:
Hi, thanks for that. It says this.
Performance & Output RRDTool Output: ERROR: for a logarithmic yaxis you must specify a lower-limit > 0 RRDtool Runtime: 0.013s | Total time: 0.014s
Any suggestion?
John Klasa Managed Services • Itiviti Senior Network Administrator
From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: den 13 juli 2017 15:54 To: 'Observium' observium@observium.org Subject: Re: [Observium] Juniper SRX340
If you click on a graph to get to the graph browser there's an option on the right hand side to show the rrd command. This will also show you whatever error is causing that graph to not be generated. Adam. Sent from http://www.bluemail.me/r?b=10066 On 13 Jul 2017, at 14:40, John Klasa mailto:John.Klasa@itiviti.com wrote: Hi, I have an issue with a SRX340 device running 15.1X49-D90 and it seems to poll sessions from the device but Observium is unable to graph and draw the graphs? Looks like this.
Any debugging I can do to find out? I did a poller –dd and it looks like this: less /var/tmp/fw5.log | egrep -i session SQL[SELECT @@SESSION.sql_mode;] SQL[SELECT @@SESSION.sql_mode;] jnxJsSPUMonitoringCurrentFlowSession.0 = 184 jnxJsSPUMonitoringMaxFlowSession.0 = 262144 jnxJsSPUMonitoringCurrentCPSession.0 = 0 jnxJsSPUMonitoringMaxCPSession.0 = 0 [jnxJsSPUMonitoringCurrentFlowSession] => string(3) "184" [jnxJsSPUMonitoringMaxFlowSession] => string(6) "262144" [jnxJsSPUMonitoringCurrentCPSession] => string(1) "0" [jnxJsSPUMonitoringMaxCPSession] => string(1) "0" ds[CurrentFlowSession].index = 0 ds[CurrentFlowSession].type = "GAUGE" ds[CurrentFlowSession].minimal_heartbeat = 600 ds[CurrentFlowSession].min = 0.0000000000e+00 ds[CurrentFlowSession].max = 1.0000000000e+11 ds[CurrentFlowSession].last_ds = "195" ds[CurrentFlowSession].value = 1.1503313835e+04 ds[CurrentFlowSession].unknown_sec = 0 ds[MaxFlowSession].index = 1 ds[MaxFlowSession].type = "GAUGE" ds[MaxFlowSession].minimal_heartbeat = 600 ds[MaxFlowSession].min = 0.0000000000e+00 ds[MaxFlowSession].max = 1.0000000000e+11 ds[MaxFlowSession].last_ds = "262144" ds[MaxFlowSession].value = 1.5464229241e+07 ds[MaxFlowSession].unknown_sec = 0 ds[CurrentCPSession].index = 2 ds[CurrentCPSession].type = "GAUGE" ds[CurrentCPSession].minimal_heartbeat = 600 ds[CurrentCPSession].min = 0.0000000000e+00 ds[CurrentCPSession].max = 1.0000000000e+11 ds[CurrentCPSession].last_ds = "0" ds[CurrentCPSession].value = 0.0000000000e+00 ds[CurrentCPSession].unknown_sec = 0 ds[MaxCPSession].index = 3 ds[MaxCPSession].type = "GAUGE" ds[MaxCPSession].minimal_heartbeat = 600 ds[MaxCPSession].min = 0.0000000000e+00 ds[MaxCPSession].max = 1.0000000000e+11 ds[MaxCPSession].last_ds = "0" ds[MaxCPSession].value = 0.0000000000e+00 ds[MaxCPSession].unknown_sec = 0 'CurrentFlowSession' => array('label' => 'CurrentFlowSession'), 'MaxFlowSession' => array('label' => 'MaxFlowSession'), 'CurrentCPSession' => array('label' => 'CurrentCPSession'), 'MaxCPSession' => array('label' => 'MaxCPSession'), fdb_count,jnxJsSPUMonitoringFlowSessions, jnxJsSPUMonitoringCPSessions, poller_perf It seems Observium is getting the value from the device? Regards -John ________________________________________
observium mailing list mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium