Hi Everyone,
I have just added a Juniper EX4200 to my kit then added it into Observium, however for some reason it does not list the ports. The JunOS is the same version as my other switches which are fine and if I discover the switch manually on CLI by device ID it appears to retrieve them fine.
I have checked the SNMP config of the device against my other ones and they are the same so assume it is maybe something else.
Any tips on how to resolve this would be appreciated.
Stephen
Discovery Output is as follows...
Module [ os ] time: 0.0334s Ports : X dsc(5)[] lo0(6)[] tap(7)[] gre(8)[] ipip(9)[] pime(10)[] pimd(11)[] mtun(12)[] lo0.0(16)[] lo0.16384(21)[] me0(33)[] me0.0(34)[] vme(35)[] vme.0(36)[] bme0(37)[] bme0.32768(38)[] bme0.32770(40)[] vcp-0(49)[] vcp-0.32768(50)[] vcp-1(51)[] vcp-1.32768(52)[] vlan(501)[] ge-0/0/0(502)[] ge-0/0/0.0(503)[] ge-0/0/1(504)[] ge-0/0/1.0(505)[] ge-0/0/2(506)[] ge-0/0/2.0(507)[] ge-0/0/3(508)[] ge-0/0/3.0(509)[] ge-0/0/4(510)[] ge-0/0/4.0(511)[] ge-0/0/5(512)[] ge-0/0/5.0(513)[] ge-0/0/6(514)[] ge-0/0/7(515)[] ge-0/0/6.0(516)[] ge-0/0/7.0(517)[] ge-0/0/8(518)[] ge-0/0/8.0(519)[] ge-0/0/9(520)[] ge-0/0/9.0(521)[] ge-0/0/10(522)[] ge-0/0/11(523)[] ge-0/0/10.0(524)[] ge-0/0/11.0(525)[] ge-0/0/12(526)[] ge-0/0/12.0(527)[] ge-0/0/13(528)[] ge-0/0/14(529)[] ge-0/0/13.0(530)[] ge-0/0/14.0(531)[] ge-0/0/15(532)[] ge-0/0/15.0(533)[] ge-0/0/16(534)[] ge-0/0/16.0(535)[] ge-0/0/17(536)[] ge-0/0/17.0(537)[] ge-0/0/18(538)[] ge-0/0/18.0(539)[] ge-0/0/19(540)[] ge-0/0/20(541)[] ge-0/0/19.0(542)[] ge-0/0/20.0(543)[] ge-0/0/21(544)[] ge-0/0/21.0(545)[] ge-0/0/22(546)[] ge-0/0/23(547)[] ge-0/0/22.0(548)[] ge-0/0/23.0(549)[] ge-0/0/24(550)[] ge-0/0/24.0(551)[] ge-0/0/25(552)[] ge-0/0/25.0(553)[] ge-0/0/26(554)[] ge-0/0/26.0(555)[] ge-0/0/27(556)[] ge-0/0/27.0(557)[] ge-0/0/28(558)[] ge-0/0/28.0(559)[] ge-0/0/29(560)[] ge-0/0/30(561)[] ge-0/0/31(562)[] ge-0/0/29.0(563)[] ge-0/0/30.0(564)[] ge-0/0/31.0(565)[] ge-0/0/32(566)[] ge-0/0/32.0(567)[] ge-0/0/33(568)[] ge-0/0/34(569)[] ge-0/0/33.0(570)[] ge-0/0/34.0(571)[] ge-0/0/35(572)[] ge-0/0/35.0(573)[] ge-0/0/36(574)[] ge-0/0/37(575)[] ge-0/0/36.0(576)[] ge-0/0/37.0(577)[] ge-0/0/38(578)[] ge-0/0/38.0(579)[] ge-0/0/39(580)[] ge-0/0/40(581)[] ge-0/0/39.0(582)[] ge-0/0/40.0(583)[] ge-0/0/41(584)[] ge-0/0/41.0(585)[] ge-0/0/42(586)[] ge-0/0/43(587)[] ge-0/0/44(588)[] ge-0/0/42.0(589)[] ge-0/0/43.0(590)[] ge-0/0/44.0(591)[] ge-0/0/45(592)[] ge-0/0/45.0(593)[] ge-0/0/46(594)[] ge-0/0/46.0(595)[] xe-0/1/0(598)[] xe-0/1/0.0(599)[] vlan.0(600)[] gr-0/0/47(603)[] gr-0/0/47.0(604)[] vlan.100(605)[] vlan.199(606)[] vlan.302(607)[] vlan.304(608)[]
Module [ ports ] time: 1.5604s Port Stacks: ....................................................................................................................................................................................................
Module [ ports-stack ] time: 0.6286s Processors : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB hrDevice:
Module [ processors ] time: 0.9984s Memory : JUNIPER-MIB .. JUNIPER-SRX5000-SPU-MONITORING-MIB HOST-RESOURCES-MIB
Module [ mempools ] time: 1.4283s IPv4 Addresses :
Module [ ipv4-addresses ] time: 0.1158s IPv6 Addresses :
Module [ ipv6-addresses ] time: 0.2653s Sensors & Status: JUNIPER-MIB .. JUNIPER-ALARM-MIB .. JUNIPER-DOM-MIB
Module [ sensors ] time: 2.644s Storage : HOST-RESOURCES-MIB ......
Module [ storage ] time: 0.052s Inventory : JUNIPER-MIB HOST-RESOURCES-MIB Module [ inventory ] stats: 11 added Module [ inventory ] time: 2.9178s Discovery protocols: LLDP-MIB CISCO-CDP-MIB
Module [ discovery-protocols ] time: 0.2521s OSPF Neighbours:
Module [ ospf-autodiscovery ] time: 0.0655s ARP/NDP Tables :
Module [ arp-table ] time: 0.3335s
Module [ junose-atm-vp ] time: 0.0003s BGP Sessions: BGP4-V2-MIB-JUNIPER No BGP on host
Module [ bgp-peers ] time: 0.0221s VLANs: Q-BRIDGE-MIB 0 100 199 302 304 Module [ vlans ] stats: 0[V+] 100[V+] 199[V+] 302[V+] 304[V+]
Module [ vlans ] time: 0.4547s
Module [ mac-accounting ] time: 0.0003s Pseudowires : PW-STD-MIB Module [ pseudowires ] time: 0.0388s VRFs :
Module [ cisco-vrf ] time: 0.1992s
Module [ cisco-sla ] time: 0.0006s
Module [ vmware-vminfo ] time: 0.0005s Cisco Class-based QoS: QoS not configured.
Module [ cisco-cbqos ] time: 0.1115s
Module [ libvirt-vminfo ] time: 0.0005s
Module [ toner ] time: 0.0004s UCD Disk IO :
Module [ ucd-diskio ] time: 0.0379s Wifi:
Module [ wifi ] time: 0.0088s
Module [ graphs ] time: 0.0072s Device [ ahostnamehere ] discovered in 12.18 seconds
Memory usage: 5MB (peak: 5.25MB) MySQL: Cell[349/0.17s] Row[150/0.11s] Rows[10/0.01s] Column[0/0s] Update[1/0s] Insert[144/0.15s] Delete[0/0s]