Hello team,
today i find OID for SFP monitoring in Cisco SB
in this case there is OID and CLI info from CISCO SG300-10 switch and SFP in slot GI9 with DOM support
can you add to Observium ? like Catalyst switches?
Only in CLI there is mW for Power in SNMPwalk there is dBm but same value dBm is right value for DOM monitoring
iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.5 = INTEGER: 47 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.6 = INTEGER: 3211700 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.7 = INTEGER: 6289 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.8 = INTEGER: -6809 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.9 = INTEGER: -9626 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.10 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.11 = INTEGER: 0 iso.3.6.1.4.1.9.6.1.101.90.1.2.1.3.57.12 = INTEGER: 0
Port Temp Voltage Current Output Input LOS [C] [Volt] [mA] Power Power [mWatt] [mWatt] ----------- ------ ------- ------- ------- ------- --- gi1 Copper gi2 Copper gi3 Copper gi4 Copper gi5 Copper gi6 Copper gi7 Copper gi8 Copper gi9 47 3.20 6.28 0.20 0.10 No gi10 N/A N/A N/A N/A N/A N/A
Temp - Internally measured transceiver temperature Voltage - Internally measured supply voltage Current - Measured TX bias current Output Power - Measured TX output power in milliWatts Input Power - Measured RX received power in milliWatts LOS - Loss of signal N/A - Not Available, N/S - Not Supported, W - Warning, E - Error
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa