Hello,
I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the application "bind" and all the graphs related to bind were displayed.
After few days, I made a copy of vmware virtual machine (on which bind was running), added it to observium (with new IP), telnet to 36605 shows the output related to bind but observium showing that no application is running on the new virtual machine.
so, 2 queries: 1) what am i missing? 2) How to debug step by step
Regards Gaurav
it is not clear whether you added the new device with a new DNS name too.
eg first server was server1 and the copy was server2.
is the unix-agent enabled in the server2 observium configuration
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************
Hello Peter,
Thanks for the response. for ease of reference we can refer to servers as 1. original server --> unix agent reporting Bind as the application found 2. copied server --> unix agent reporting no application found
The "copied server" has different IP, hostname and a new DNS name too. Through Observium able to get graphs of resources and other details of both server seperately.
Unix-agent has been verified to be enabled for both the servers in Observium -->(device)-->(poller Modules) --> unix-agent is set to enabled.
Also checked for the output of the unix agent using telnet, it's showing the output.
Regards Gaurav
Date: Wed, 18 May 2016 16:29:23 +1000 From: Peter.Hine@familycourt.gov.au To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Help needed with unix-agent [SEC=UNCLASSIFIED] Message-ID: < OF914DA877.F8299CB3-ONCA257FB7.00238B7C-CA257FB7.0023A6A1@familycourt.gov.au
Content-Type: text/plain; charset="us-ascii"
it is not clear whether you added the new device with a new DNS name too.
eg first server was server1 and the copy was server2.
is the unix-agent enabled in the server2 observium configuration
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************
On Wed, May 18, 2016 at 11:54 AM Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello,
I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the application "bind" and all the graphs related to bind were displayed.
After few days, I made a copy of vmware virtual machine (on which bind was running), added it to observium (with new IP), telnet to 36605 shows the output related to bind but observium showing that no application is running on the new virtual machine.
so, 2 queries:
- what am i missing?
- How to debug step by step
Regards Gaurav
Hi Gaurav
does ./poller.php -h <copied server> yield anything useful about bind?
regards,
Roeland
On 18 May 2016 at 12:38, Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello Peter,
Thanks for the response. for ease of reference we can refer to servers as
- original server --> unix agent reporting Bind as the application found
- copied server --> unix agent reporting no application found
The "copied server" has different IP, hostname and a new DNS name too. Through Observium able to get graphs of resources and other details of both server seperately.
Unix-agent has been verified to be enabled for both the servers in Observium -->(device)-->(poller Modules) --> unix-agent is set to enabled.
Also checked for the output of the unix agent using telnet, it's showing the output.
Regards Gaurav
Date: Wed, 18 May 2016 16:29:23 +1000 From: Peter.Hine@familycourt.gov.au To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Help needed with unix-agent [SEC=UNCLASSIFIED] Message-ID: < OF914DA877.F8299CB3-ONCA257FB7.00238B7C-CA257FB7.0023A6A1@familycourt.gov.au
Content-Type: text/plain; charset="us-ascii"
it is not clear whether you added the new device with a new DNS name too.
eg first server was server1 and the copy was server2.
is the unix-agent enabled in the server2 observium configuration
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail.
On Wed, May 18, 2016 at 11:54 AM Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello,
I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the application "bind" and all the graphs related to bind were displayed.
After few days, I made a copy of vmware virtual machine (on which bind was running), added it to observium (with new IP), telnet to 36605 shows the output related to bind but observium showing that no application is running on the new virtual machine.
so, 2 queries:
- what am i missing?
- How to debug step by step
Regards Gaurav
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
adding -d to the poller command shows even more .... maybe that first sql could reveal something (how about the microsoft solution - turn the agent module off and on - haha)
eg Observium UNIX Agent: SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '212' AND `attrib_type` = 'agent_port'] SQL RUNTIME[0.00018787s] execution time: 462ms RRD CMD[update /opt/observium/rrd/itsmain1/agent.rrd N:462] RRD RUNTIME[0.0012s] RRD STDOUT[OK u:0.00 s:0.00 r:0.51] RRD_STATUS[TRUE]
$agent_data - /opt/observium/poller.php:163
/opt/observium/includes/polling/unix-agent.inc.php:131 ....
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
********************************************************************** The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail. **********************************************************************
Hello Roeland,
Kindly find the excerpts from poller.php executed for both original and copied server.
poller.php -h <original server> ##### Module Start: unix-agent #####
Observium UNIX Agent: execution time: 2056ms No include: No include: Observium No include: df No include: mounts No include: ps No include: mem No include: cpu No include: uptime No include: lnx_if:sep(58) No include: tcp_conn_stats No include: md diskstats No include: kernel No include: netctr No include: local
Processes: Sensors: Virtual machines: o Module time 2.0657s
poller.php -h <copied server>
##### Module Start: unix-agent #####
Observium UNIX Agent: execution time: 2074ms No include: No include: Observium No include: df No include: mounts No include: ps No include: mem No include: cpu No include: uptime No include: lnx_if:sep(58) No include: tcp_conn_stats No include: md diskstats No include: kernel No include: netctr No include: local
Processes: Sensors: Virtual machines: o Module time 2.0855s
Not able to find any difference in the output of unix agent part of poller.php
Regards Gaurav
Message: 2 Date: Wed, 18 May 2016 12:42:22 +0100 From: Roeland Mertens roeland@unbreakable.org.uk To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Help needed with unix-agent Message-ID: CAM7fMXsYgP12wZa0mXvm+faFyT2iFXUMS9+kzi=HhDp-TvDKZw@mail.gmail.com Content-Type: text/plain; charset="utf-8"
Hi Gaurav
does ./poller.php -h <copied server> yield anything useful about bind?
regards,
Roeland
On Wed, May 18, 2016 at 5:08 PM Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello Peter,
Thanks for the response. for ease of reference we can refer to servers as
- original server --> unix agent reporting Bind as the application found
- copied server --> unix agent reporting no application found
The "copied server" has different IP, hostname and a new DNS name too. Through Observium able to get graphs of resources and other details of both server seperately.
Unix-agent has been verified to be enabled for both the servers in Observium -->(device)-->(poller Modules) --> unix-agent is set to enabled.
Also checked for the output of the unix agent using telnet, it's showing the output.
Regards Gaurav
Date: Wed, 18 May 2016 16:29:23 +1000 From: Peter.Hine@familycourt.gov.au To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Help needed with unix-agent [SEC=UNCLASSIFIED] Message-ID: < OF914DA877.F8299CB3-ONCA257FB7.00238B7C-CA257FB7.0023A6A1@familycourt.gov.au
Content-Type: text/plain; charset="us-ascii"
it is not clear whether you added the new device with a new DNS name too.
eg first server was server1 and the copy was server2.
is the unix-agent enabled in the server2 observium configuration
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the intended recipient please notify the sender immediately and delete this e-mail. It is noted that legal privilege is not waived because you have read this e-mail.
On Wed, May 18, 2016 at 11:54 AM Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello,
I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the application "bind" and all the graphs related to bind were displayed.
After few days, I made a copy of vmware virtual machine (on which bind was running), added it to observium (with new IP), telnet to 36605 shows the output related to bind but observium showing that no application is running on the new virtual machine.
so, 2 queries:
- what am i missing?
- How to debug step by step
Regards Gaurav
./poller.php -h <device> -m unix-agent,applications -d
Adam.
Sent from BlueMail
On 19 May 2016, 12:31, at 12:31, Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello Roeland,
Kindly find the excerpts from poller.php executed for both original and copied server.
poller.php -h <original server> ##### Module Start: unix-agent #####
Observium UNIX Agent: execution time: 2056ms No include: No include: Observium No include: df No include: mounts No include: ps No include: mem No include: cpu No include: uptime No include: lnx_if:sep(58) No include: tcp_conn_stats No include: md diskstats No include: kernel No include: netctr No include: local
Processes: Sensors: Virtual machines: o Module time 2.0657s
poller.php -h <copied server>
##### Module Start: unix-agent #####
Observium UNIX Agent: execution time: 2074ms No include: No include: Observium No include: df No include: mounts No include: ps No include: mem No include: cpu No include: uptime No include: lnx_if:sep(58) No include: tcp_conn_stats No include: md diskstats No include: kernel No include: netctr No include: local
Processes: Sensors: Virtual machines: o Module time 2.0855s
Not able to find any difference in the output of unix agent part of poller.php
Regards Gaurav
Message: 2 Date: Wed, 18 May 2016 12:42:22 +0100 From: Roeland Mertens roeland@unbreakable.org.uk To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Help needed with unix-agent Message-ID: CAM7fMXsYgP12wZa0mXvm+faFyT2iFXUMS9+kzi=HhDp-TvDKZw@mail.gmail.com Content-Type: text/plain; charset="utf-8"
Hi Gaurav
does ./poller.php -h <copied server> yield anything useful about bind?
regards,
Roeland
On Wed, May 18, 2016 at 5:08 PM Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello Peter,
Thanks for the response. for ease of reference we can refer to servers as
- original server --> unix agent reporting Bind as the application
found
- copied server --> unix agent reporting no application found
The "copied server" has different IP, hostname and a new DNS name
too.
Through Observium able to get graphs of resources and other details
of
both server seperately.
Unix-agent has been verified to be enabled for both the servers in Observium -->(device)-->(poller Modules) --> unix-agent is set to
enabled.
Also checked for the output of the unix agent using telnet, it's
showing
the output.
Regards Gaurav
Date: Wed, 18 May 2016 16:29:23 +1000 From: Peter.Hine@familycourt.gov.au To: Observium Network Observation System observium@observium.org Subject: Re: [Observium] Help needed with unix-agent [SEC=UNCLASSIFIED] Message-ID: <
OF914DA877.F8299CB3-ONCA257FB7.00238B7C-CA257FB7.0023A6A1@familycourt.gov.au
Content-Type: text/plain; charset="us-ascii"
it is not clear whether you added the new device with a new DNS name
too.
eg first server was server1 and the copy was server2.
is the unix-agent enabled in the server2 observium configuration
thanks
Peter Hine Senior Technical Support Engineer (Servers) FCoA ITS peter.hine@familycourt.gov.au
The information contained in this e-mail (including any attachments) is for the exclusive use of the addressee. If you are not the
intended
recipient please notify the sender immediately and delete this
e-mail.
It is noted that legal privilege is not waived because you have read this e-mail.
On Wed, May 18, 2016 at 11:54 AM Gaurav Chaturvedi gaurav@x3me.net wrote:
Hello,
I have installed ubuntu on virtual machine, configured bind and unix-agent successfully, in observium were able to see the
application
"bind" and all the graphs related to bind were displayed.
After few days, I made a copy of vmware virtual machine (on which
bind
was running), added it to observium (with new IP), telnet to 36605
shows
the output related to bind but observium showing that no application
is
running on the new virtual machine.
so, 2 queries:
- what am i missing?
- How to debug step by step
Regards Gaurav
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (4)
-
Adam Armstrong -
Gaurav Chaturvedi -
Peter.Hine＠familycourt.gov.au -
Roeland Mertens