About PPPOE / VPDN
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I currently use a cisco 7200 (lns)
Since the userid (with realm) is static can I create charts based on a particular userid?
2014-05-30 12:53 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Nope.
This is something for RADIUS accounting to do, trying to get this data out of port counters is just silly.
adam.
On 2014-05-30 06:00, Paolo Giustiniani wrote:
I currently use a cisco 7200 (lns)
Since the userid (with realm) is static can I create charts based on a particular userid?
2014-05-30 12:53 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1] _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
-- Paolo Giustiniani Mobile. 348.3857809 Mail: paolo.giustiniani@cri.it Skype: p.giustiniani Skype number: 011.19825260
Rispetta l'ambiente: se non ti è necessario, non stampare questa mail.
Note in ottemperanza al Decreto Legislativo 196/2003 sulla Tutela dei Dati Personali: Il presente messaggio e gli eventuali allegati sono rivolti unicamente all'attenzione del destinatario ed il relativo contenuto potrebbe avere carattere riservato e ne e' vietata la diffusione in qualunque modo eseguita. Nel caso in cui aveste ricevuto questa mail per errore, Vi invitiamo ad avvertire il mittente al più presto a mezzo posta elettronica ed a distruggere il messaggio erroneamente ricevuto.
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
how can I enable the feature ppp
If you do not find the interfaces as I do?
2014-06-01 5:05 GMT+02:00 Adam Armstrong adama@memetic.org:
Nope.
This is something for RADIUS accounting to do, trying to get this data out of port counters is just silly.
adam.
On 2014-05-30 06:00, Paolo Giustiniani wrote:
I currently use a cisco 7200 (lns)
Since the userid (with realm) is static can I create charts based on a particular userid?
2014-05-30 12:53 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [1]
-- Paolo Giustiniani Mobile. 348.3857809 Mail: paolo.giustiniani@cri.it Skype: p.giustiniani Skype number: 011.19825260
Rispetta l'ambiente: se non ti è necessario, non stampare questa mail.
Note in ottemperanza al Decreto Legislativo 196/2003 sulla Tutela dei Dati Personali: Il presente messaggio e gli eventuali allegati sono rivolti unicamente all'attenzione del destinatario ed il relativo contenuto potrebbe avere carattere riservato e ne e' vietata la diffusione in qualunque modo eseguita. Nel caso in cui aveste ricevuto questa mail per errore, Vi invitiamo ad avvertire il mittente al più presto a mezzo posta elettronica ed a distruggere il messaggio erroneamente ricevuto.
Links:
[1] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote:
Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I can manually add an interface?
2014-05-30 14:27 GMT+02:00 Tom Laermans tom.laermans@powersource.cx:
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx
wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote:
Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com
wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
thanks for that, I forgot about looking in the wiki…
question, it says to put in the ignore variable if I want to ignore stuff…
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put…
$config[‘bad_if'][] = “”
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
From: Tom Laermans Sent: Friday, 30 May 2014 13:27 To: Observium Network Observation System
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Sorry, i have seriously problem.
obsevium not get my pppoe interface and i have enable this feature
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com:
Hi,
thanks for that, I forgot about looking in the wiki...
question, it says to put in the ignore variable if I want to ignore stuff...
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put...
$config['bad_if'][] = ""
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
*From:* Tom Laermans tom.laermans@powersource.cx *Sent:* Friday, 30 May 2014 13:27 *To:* Observium Network Observation System observium@observium.org
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx
wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the
defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and
our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com
wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello to all, i would buy professional edition.
I would like to first know how to enable the discovery interface ppp
Thanks
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com:
Hi,
thanks for that, I forgot about looking in the wiki...
question, it says to put in the ignore variable if I want to ignore stuff...
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put...
$config['bad_if'][] = ""
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
*From:* Tom Laermans tom.laermans@powersource.cx *Sent:* Friday, 30 May 2014 13:27 *To:* Observium Network Observation System observium@observium.org
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx
wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the
defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and
our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com
wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
Hi,
i currently use the professional for our PPPOE session on mikrotik equipment
we also monitor the PPP interfaces on our standard ADSL routers with SNMP enabled :)
i just simply commented out the pppoe line in defaults.inc.php
# $ config ['bad_if'] [] = "pppoe-“;
but im sure the is a better way :)
Regards
Simon - Hestor Ltd
On 17 Jul 2014, at 11:25, Paolo Giustiniani clubbu@gmail.com wrote:
Hello to all, i would buy professional edition.
I would like to first know how to enable the discovery interface ppp
Thanks
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com: Hi,
thanks for that, I forgot about looking in the wiki…
question, it says to put in the ignore variable if I want to ignore stuff…
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put…
$config[‘bad_if'][] = “”
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
From: Tom Laermans Sent: Friday, 30 May 2014 13:27 To: Observium Network Observation System
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello Simon, i commented out the pppeo line in defaults.inc.php
$ config ['bad_if'] [] = "pppoe-";
but this doesn't work
Have you install observium in centos o debian?
2014-07-17 12:37 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
i currently use the professional for our PPPOE session on mikrotik equipment
we also monitor the PPP interfaces on our standard ADSL routers with SNMP enabled :)
i just simply commented out the pppoe line in defaults.inc.php
# $ config ['bad_if'] [] = "pppoe-";
but im sure the is a better way :)
Regards
Simon - Hestor Ltd
On 17 Jul 2014, at 11:25, Paolo Giustiniani clubbu@gmail.com wrote:
Hello to all, i would buy professional edition.
I would like to first know how to enable the discovery interface ppp
Thanks
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com:
Hi,
thanks for that, I forgot about looking in the wiki...
question, it says to put in the ignore variable if I want to ignore stuff...
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put...
$config['bad_if'][] = ""
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
*From:* Tom Laermans tom.laermans@powersource.cx *Sent:* Friday, 30 May 2014 13:27 *To:* Observium Network Observation System observium@observium.org
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx
wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the
defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers
and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com
wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
i have it running on Ubuntu 12.04 LTS
it might take time to poll the devices correctly and find the interfaces…
also you need to make sure the interface names are set as " pppoe-* " otherwise it won’t be detected correctly
Regards
Simon
On 17 Jul 2014, at 11:43, Paolo Giustiniani clubbu@gmail.com wrote:
Hello Simon, i commented out the pppeo line in defaults.inc.php
$ config ['bad_if'] [] = "pppoe-“;
but this doesn't work
Have you install observium in centos o debian?
2014-07-17 12:37 GMT+02:00 Simon Smith simonsmith5521@gmail.com: Hi,
i currently use the professional for our PPPOE session on mikrotik equipment
we also monitor the PPP interfaces on our standard ADSL routers with SNMP enabled :)
i just simply commented out the pppoe line in defaults.inc.php
# $ config ['bad_if'] [] = "pppoe-“;
but im sure the is a better way :)
Regards
Simon - Hestor Ltd
On 17 Jul 2014, at 11:25, Paolo Giustiniani clubbu@gmail.com wrote:
Hello to all, i would buy professional edition.
I would like to first know how to enable the discovery interface ppp
Thanks
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com: Hi,
thanks for that, I forgot about looking in the wiki…
question, it says to put in the ignore variable if I want to ignore stuff…
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put…
$config[‘bad_if'][] = “”
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
From: Tom Laermans Sent: Friday, 30 May 2014 13:27 To: Observium Network Observation System
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans tom.laermans@powersource.cx wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers and our mikrotik equipment???
Regards
Simon
Sent from my iPad
On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com wrote:
I would like to monitor several interfaces pppoe connections.
I enabled the feature and vpdn pppoe
# $ config ['bad_if'] [] = "pppoe-"; $ config ['poller_modules'] ['cisco-vpdn'] = 1;
The process of self discovery did not detect it.
The command show vpdn order properly connections.
How can I do?
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello, this is my situation
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(15b), RELEASE SOFTWARE (fc1)
I retrive from command line this output
show ip route
xxxxxxxxxxxxx/32 is directly connected, Virtual-Access2.4
I have modify my file
/opt/observium/includes/defaults.inc.ph
by adding the following lines
$config['bad_if'][] = "Virtual-Access"; $config['bad_if'][] = "Virtual-Access*";
Observium doesn't find ports/interface
Can you help me?
2014-07-17 12:55 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
i have it running on Ubuntu 12.04 LTS
it might take time to poll the devices correctly and find the interfaces...
also you need to make sure the interface names are set as " pppoe-* " otherwise it won't be detected correctly
Regards
Simon
On 17 Jul 2014, at 11:43, Paolo Giustiniani clubbu@gmail.com wrote:
Hello Simon, i commented out the pppeo line in defaults.inc.php
$ config ['bad_if'] [] = "pppoe-";
but this doesn't work
Have you install observium in centos o debian?
2014-07-17 12:37 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
i currently use the professional for our PPPOE session on mikrotik equipment
we also monitor the PPP interfaces on our standard ADSL routers with SNMP enabled :)
i just simply commented out the pppoe line in defaults.inc.php
# $ config ['bad_if'] [] = "pppoe-";
but im sure the is a better way :)
Regards
Simon - Hestor Ltd
On 17 Jul 2014, at 11:25, Paolo Giustiniani clubbu@gmail.com wrote:
Hello to all, i would buy professional edition.
I would like to first know how to enable the discovery interface ppp
Thanks
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com:
Hi,
thanks for that, I forgot about looking in the wiki...
question, it says to put in the ignore variable if I want to ignore stuff...
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put...
$config['bad_if'][] = ""
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
*From:* Tom Laermans tom.laermans@powersource.cx *Sent:* Friday, 30 May 2014 13:27 *To:* Observium Network Observation System observium@observium.org
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans <
tom.laermans@powersource.cx> wrote:
(please don't edit defaults.inc.php)
On 05/30/2014 12:53 PM, Simon Smith wrote: Hi,
What equipment are you using?
Because all I did was comment out the pppoe line in the
defaults.inc.php file
And the discovery found all our pppoe connects on our ADSL routers
and our mikrotik equipment???
Regards
Simon
Sent from my iPad
> On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com
wrote:
> > I would like to monitor several interfaces pppoe connections. > > I enabled the feature and vpdn pppoe > > # $ config ['bad_if'] [] = "pppoe-"; > $ config ['poller_modules'] ['cisco-vpdn'] = 1; > > The process of self discovery did not detect it. > > The command show vpdn order properly connections. > > How can I do? > >
The question is:
how can enable auto discovery for interface ppp?
2014-07-17 14:41 GMT+02:00 Paolo Giustiniani clubbu@gmail.com:
Hello, this is my situation
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(15b), RELEASE SOFTWARE (fc1)
I retrive from command line this output
show ip route
xxxxxxxxxxxxx/32 is directly connected, Virtual-Access2.4
I have modify my file
/opt/observium/includes/defaults.inc.ph
by adding the following lines
$config['bad_if'][] = "Virtual-Access"; $config['bad_if'][] = "Virtual-Access*";
Observium doesn't find ports/interface
Can you help me?
2014-07-17 12:55 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
i have it running on Ubuntu 12.04 LTS
it might take time to poll the devices correctly and find the interfaces...
also you need to make sure the interface names are set as " pppoe-* " otherwise it won't be detected correctly
Regards
Simon
On 17 Jul 2014, at 11:43, Paolo Giustiniani clubbu@gmail.com wrote:
Hello Simon, i commented out the pppeo line in defaults.inc.php
$ config ['bad_if'] [] = "pppoe-";
but this doesn't work
Have you install observium in centos o debian?
2014-07-17 12:37 GMT+02:00 Simon Smith simonsmith5521@gmail.com:
Hi,
i currently use the professional for our PPPOE session on mikrotik equipment
we also monitor the PPP interfaces on our standard ADSL routers with SNMP enabled :)
i just simply commented out the pppoe line in defaults.inc.php
# $ config ['bad_if'] [] = "pppoe-";
but im sure the is a better way :)
Regards
Simon - Hestor Ltd
On 17 Jul 2014, at 11:25, Paolo Giustiniani clubbu@gmail.com wrote:
Hello to all, i would buy professional edition.
I would like to first know how to enable the discovery interface ppp
Thanks
2014-05-30 14:44 GMT+02:00 simonsmith5521@gmail.com:
Hi,
thanks for that, I forgot about looking in the wiki...
question, it says to put in the ignore variable if I want to ignore stuff...
but I don't!!! I want to show the pppoe interfaces ???
so, should I just simple put...
$config['bad_if'][] = ""
and that would clear all the bad_if stuff ???
regards
Simon
Sent from Surface
*From:* Tom Laermans tom.laermans@powersource.cx *Sent:* Friday, 30 May 2014 13:27 *To:* Observium Network Observation System observium@observium.org
http://www.observium.org/wiki/Configuration_Options#Configuration_format
On 05/30/2014 01:06 PM, Simon Smith wrote:
Hi,
If I'm not to edit the defaults.inc.php
Then how would I include it in my config.php
Remember I want to show stuff with pppoe in the name!?
Regards
Simon
Sent from my iPhone
On 30 May 2014, at 12:00 pm, Tom Laermans <
tom.laermans@powersource.cx> wrote:
(please don't edit defaults.inc.php)
> On 05/30/2014 12:53 PM, Simon Smith wrote: > Hi, > > What equipment are you using? > > Because all I did was comment out the pppoe line in the
defaults.inc.php file
> > And the discovery found all our pppoe connects on our ADSL routers
and our mikrotik equipment???
> > Regards > > Simon > > Sent from my iPad > >> On 30 May 2014, at 11:26 am, Paolo Giustiniani clubbu@gmail.com
wrote:
>> >> I would like to monitor several interfaces pppoe connections. >> >> I enabled the feature and vpdn pppoe >> >> # $ config ['bad_if'] [] = "pppoe-"; >> $ config ['poller_modules'] ['cisco-vpdn'] = 1; >> >> The process of self discovery did not detect it. >> >> The command show vpdn order properly connections. >> >> How can I do? >> >>
On 2014-07-17 13:41, Paolo Giustiniani wrote:
Hello, this is my situation
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(15b), RELEASE SOFTWARE (fc1)
I retrive from command line this output
show ip route
xxxxxxxxxxxxx/32 is directly connected, Virtual-Access2.4
I have modify my file
/opt/observium/includes/defaults.inc.ph [2]
by adding the following lines
$config['bad_if'][] = "Virtual-Access"; $config['bad_if'][] = "Virtual-Access*";
This will *stop* Observium discovering these ports.
By default we don't discover virtual-access ports, because they're useless meaningless. If your 7200 is a bRAS or something, you really don't want to detect them, as they're heavy and numerous.
You shouldn't modify defaults.inc.php because it will be over-written by upgrades. For an unmodified defaults.inc.php, you can pull out the "virtual-" entry which is causing you problems by putting something like this in your config.php :
unset($config['bad_if'][1]);
The line with "virtual-" in should be index 1 in the array.
adam.
Thanks Adam! Il 20/lug/2014 00:54 "Adam Armstrong" adama@memetic.org ha scritto:
On 2014-07-17 13:41, Paolo Giustiniani wrote:
Hello, this is my situation
IOS (tm) 7200 Software (C7200-IS-M), Version 12.3(15b), RELEASE SOFTWARE (fc1)
I retrive from command line this output
show ip route
xxxxxxxxxxxxx/32 is directly connected, Virtual-Access2.4
I have modify my file
/opt/observium/includes/defaults.inc.ph [2]
by adding the following lines
$config['bad_if'][] = "Virtual-Access"; $config['bad_if'][] = "Virtual-Access*";
This will *stop* Observium discovering these ports.
By default we don't discover virtual-access ports, because they're useless meaningless. If your 7200 is a bRAS or something, you really don't want to detect them, as they're heavy and numerous.
You shouldn't modify defaults.inc.php because it will be over-written by upgrades. For an unmodified defaults.inc.php, you can pull out the "virtual-" entry which is causing you problems by putting something like this in your config.php :
unset($config['bad_if'][1]);
The line with "virtual-" in should be index 1 in the array.
adam. _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (5)
-
Adam Armstrong -
Paolo Giustiniani -
Simon Smith -
simonsmith5521＠gmail.com
-
Tom Laermans