I suppose, that instead of writing an Alert Checker for one function (HSRP in this case) efforts can be done in writing a generic alert checker for SYSLOG :) Lot's of alerts in Cisco world can be done with SYSLOG: - IP SLA Tracks; - VPN alerts; - Overrun of the HW TCAM; - Routing protocol flaps; - STP changes; - FHRP (like in this case); - Module up/down events; and many others.

Example of SYSLOG for HSRP is: "HSRP-5-STATECHANGE : GigabitEthernet0/0 Grp 1 state Active -> Speak", it's easy to build an alert from this.

--- Best, Sergey

Вторник, 18 ноября 2014, 21:31 UTC от Marco Spicuglia Marco.Spicuglia@reasonnet.com:

I noticed that when an HSRP interface is in active mode, the gateway IP shows up on that interface and not in the standby one, which shows only its own IP. Maybe, detecting where the GW shows up could be used for triggering hsrp events?

---

From: observium observium-bounces@observium.org on behalf of Adam Armstrong adama@memetic.org Sent: 18 November 2014 21:10 To: Observium Network Observation System Subject: Re: [Observium] HSRP event tracking   Looks like something worth adding though!   adam.   ------ Original Message ------ From: "Pedersen, Sean" < spedersen@io.com > To: "Observium Network Observation System (observium@observium.org)" < observium@observium.org > Sent: 11/18/2014 1:30:10 PM Subject: Re: [Observium] HSRP event tracking

...

I don’t believe there is an HSRP tracker. It’s definitely not in the sensor entity type. Sensors are things like current, dBm, fan speed, power, state, temperature, voltage, etc. There’s a list of known metrics and attributes here:

http://www.observium.org/wiki/Alerting_Metrics_and_Attributes

Examples of values can be found in your MySQL database.

From: <Pedrosi>, "Derek G." < pedrosi@millercanfield.com > Reply-To: "Observium Network Observation System ( observium@observium.org )" < observium@observium.org > Date: Tuesday, November 18, 2014 at 12:14 PM To: "Observium Network Observation System ( observium@observium.org )" < observium@observium.org > Subject: [Observium] HSRP event tracking

Is there a way to add a checker for Cisco HSRP events? From CISCO-HSRP-MIB… HsrpState ::= TEXTUAL-CONVENTION     STATUS          current     DESCRIPTION         "The current state of the HSRP protocol for a given         HSRP group entry."     SYNTAX          INTEGER  {                         initial(1),                         learn(2),                         listen(3),                         speak(4),                         standby(5),                         active(6)                     }   This does not work…       Regards, derek Subscriber v14.11.5987

Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information.

The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received

this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation. _______________________________________________

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

This is an old question, but were anyone able to find HSRP-states in the database to use with alerts? Not syslog.

Regards Fredrik

Från: observium [mailto:observium-bounces@observium.org] För Adam Armstrong Skickat: den 18 november 2014 21:11 Till: Observium Network Observation System observium@observium.org Ämne: Re: [Observium] HSRP event tracking

Looks like something worth adding though!

adam.

------ Original Message ------ From: "Pedersen, Sean" <spedersen@io.commailto:spedersen@io.com> To: "Observium Network Observation System (observium@observium.orgmailto:observium@observium.org)" <observium@observium.orgmailto:observium@observium.org> Sent: 11/18/2014 1:30:10 PM Subject: Re: [Observium] HSRP event tracking

I don’t believe there is an HSRP tracker. It’s definitely not in the sensor entity type. Sensors are things like current, dBm, fan speed, power, state, temperature, voltage, etc. There’s a list of known metrics and attributes here:

http://www.observium.org/wiki/Alerting_Metrics_and_Attributes

Examples of values can be found in your MySQL database.

From: <Pedrosi>, "Derek G." <pedrosi@millercanfield.commailto:pedrosi@millercanfield.com> Reply-To: "Observium Network Observation System (observium@observium.orgmailto:observium@observium.org)" <observium@observium.orgmailto:observium@observium.org> Date: Tuesday, November 18, 2014 at 12:14 PM To: "Observium Network Observation System (observium@observium.orgmailto:observium@observium.org)" <observium@observium.orgmailto:observium@observium.org> Subject: [Observium] HSRP event tracking

Is there a way to add a checker for Cisco HSRP events? From CISCO-HSRP-MIB… HsrpState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The current state of the HSRP protocol for a given HSRP group entry." SYNTAX INTEGER { initial(1), learn(2), listen(3), speak(4), standby(5), active(6) }

This does not work… [cid:image001.jpg@01D3848B.3EE40D90]

Regards, derek Subscriber v14.11.5987

Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control their information.

The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary, attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error, and delete this communication including any attached files from your system. Thank you for your cooperation.

Hello Mike, would this also cover VRRP?

Regards

Richard Wigzell Technical Lead, Storage Platforms IT Services | University of Oxford 13 Banbury Road, Oxford OX2 6NN

T: 01865 616282 www.it.ox.ac.uk

-----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: 03 January 2018 15:57 To: Observium observium@observium.org Subject: Re: [Observium] HSRP event tracking

Hi,

yes work in progress, since I also want this for self :)

Svensson Fredrik A wrote:

This is an old question, but were anyone able to find HSRP-states in the database to use with alerts? Not syslog.

Regards Fredrik

*Från:* observium [mailto:observium-bounces@observium.org] *För *Adam Armstrong *Skickat:* den 18 november 2014 21:11 *Till:* Observium Network Observation System observium@observium.org *Ämne:* Re: [Observium] HSRP event tracking

Looks like something worth adding though!

adam.

------ Original Message ------

From: "Pedersen, Sean" <spedersen@io.com mailto:spedersen@io.com>

To: "Observium Network Observation System (observium@observium.org mailto:observium@observium.org)" <observium@observium.org mailto:observium@observium.org>

Sent: 11/18/2014 1:30:10 PM

Subject: Re: [Observium] HSRP event tracking

I don’t believe there is an HSRP tracker. It’s definitely not in the sensor entity type. Sensors are things like current, dBm, fan speed, power, state, temperature, voltage,
etc. There’s a list of known metrics and attributes here:



http://www.observium.org/wiki/Alerting_Metrics_and_Attributes



Examples of values can be found in your MySQL database.



*From: *<Pedrosi>, "Derek G." <pedrosi@millercanfield.com <mailto:pedrosi@millercanfield.com>>
*Reply-To: *"Observium Network Observation System (observium@observium.org <mailto:observium@observium.org>)" <observium@observium.org <mailto:observium@observium.org>>
*Date: *Tuesday, November 18, 2014 at 12:14 PM
*To: *"Observium Network Observation System (observium@observium.org <mailto:observium@observium.org>)" <observium@observium.org <mailto:observium@observium.org>>
*Subject: *[Observium] HSRP event tracking



Is there a way to add a checker for Cisco HSRP events?

From CISCO-HSRP-MIB…

HsrpState ::= TEXTUAL-CONVENTION

    STATUS          current

    DESCRIPTION

        "The current state of the HSRP protocol for a given

        HSRP group entry."

    SYNTAX          INTEGER  {

                        initial(1),

                        learn(2),

                        listen(3),

                        speak(4),

                        standby(5),

                        active(6)

                    }



This does not work…







Regards,

derek

Subscriber v14.11.5987



*Founded in 2007, IO is a worldwide leader in software defined data center technology, services and solutions that enable businesses and governments to intelligently control
their information.*

The communication contained in this e-mail is confidential and is intended only for the named recipient(s) and may contain information that is privileged, proprietary,
attorney work product or exempt from disclosure under applicable law. If you have received this message in error, or are not the named recipient(s), please note that any form
of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. Please immediately notify the sender of the error,
and delete this communication including any attached files from your system. Thank you for your cooperation.

---

observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium