Hi we have added a couple of arista devices to observium. But we are missing a few things. Ospf neighbours are not showing. The routing tab on the device page is not showing And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards, maarten
OSPF data showing relies upon OSPF-MIB being populated by the device.
The routing tab won't show unless routing-protocol data has been found for that device.
As for the config tab... That should never happens :)
adam.
On 21/11/2012 09:25, Maarten Kruyswijk wrote:
Hi we have added a couple of arista devices to observium. But we are missing a few things. Ospf neighbours are not showing. The routing tab on the device page is not showing And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards, maarten
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Addam,
I have checked. It should us the OSPF-MIB, but I think that because the device identifier is arista-eos it doesn't look for routing data?
As for the config tab. Not sure why that never should happen. It does it with cisco and juniper devices
Van: Adam Armstrong adama@memetic.org Beantwoorden - Aan: Observium Network Observation System observium@observium.org Datum: Wednesday, November 21, 2012 4:46 PM Aan: Observium Network Observation System observium@observium.org Onderwerp: Re: [Observium] question about arista devices
OSPF data showing relies upon OSPF-MIB being populated by the device.
The routing tab won't show unless routing-protocol data has been found for that device.
As for the config tab... That should never happens :)
adam.
On 21/11/2012 09:25, Maarten Kruyswijk wrote:
Hi we have added a couple of arista devices to observium.
But we are missing a few things.
Ospf neighbours are not showing.
The routing tab on the device page is not showing
And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards,
maarten
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/obs ervium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Arista devices don't do OSPF-MIB currently; keep your eyes open for a release in the near future which does.
Re config tab... if your hostname in observium is the same as in rancid, it should work...
Tom
On 21/11/2012 16:52, Maarten Kruyswijk wrote:
Hi Addam,
I have checked. It should us the OSPF-MIB, but I think that because the device identifier is arista-eos it doesn't look for routing data?
As for the config tab. Not sure why that never should happen. It does it with cisco and juniper devices...
Van: Adam Armstrong <adama@memetic.org mailto:adama@memetic.org> Beantwoorden - Aan: Observium Network Observation System <observium@observium.org mailto:observium@observium.org> Datum: Wednesday, November 21, 2012 4:46 PM Aan: Observium Network Observation System <observium@observium.org mailto:observium@observium.org> Onderwerp: Re: [Observium] question about arista devices
OSPF data showing relies upon OSPF-MIB being populated by the device.
The routing tab won't show unless routing-protocol data has been found for that device.
As for the config tab... That should never happens :)
adam.
On 21/11/2012 09:25, Maarten Kruyswijk wrote:
Hi we have added a couple of arista devices to observium. But we are missing a few things. Ospf neighbours are not showing. The routing tab on the device page is not showing And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards, maarten
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Arista is providing an OSPF-mib so I think they do
Van: Tom Laermans tom.laermans@powersource.cx Beantwoorden - Aan: Observium Network Observation System observium@observium.org Datum: Saturday, November 24, 2012 12:41 AM Aan: observium@observium.org Onderwerp: Re: [Observium] question about arista devices
Arista devices don't do OSPF-MIB currently; keep your eyes open for a release in the near future which does.
Re config tab... if your hostname in observium is the same as in rancid, it should work...
Tom
On 21/11/2012 16:52, Maarten Kruyswijk wrote:
Hi Addam,
I have checked. It should us the OSPF-MIB, but I think that because the device identifier is arista-eos it doesn't look for routing data?
As for the config tab. Not sure why that never should happen. It does it with cisco and juniper devices
Van: Adam Armstrong adama@memetic.org Beantwoorden - Aan: Observium Network Observation System observium@observium.org Datum: Wednesday, November 21, 2012 4:46 PM Aan: Observium Network Observation System observium@observium.org Onderwerp: Re: [Observium] question about arista devices
OSPF data showing relies upon OSPF-MIB being populated by the device.
The routing tab won't show unless routing-protocol data has been found for that device.
As for the config tab... That should never happens :)
adam.
On 21/11/2012 09:25, Maarten Kruyswijk wrote:
Hi we have added a couple of arista devices to observium.
But we are missing a few things.
Ospf neighbours are not showing.
The routing tab on the device page is not showing
And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards,
maarten
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/ob servium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/obs ervium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Whilst OSPF-MIB support does exist on Arista devices, it is currently disabled as as default and requires a hidden command to enable because there are bugs in the underlying SNMP/routing code that can crash the whole OSPF process.
It's recommended that you do not enable OSPF-MIB if you want your device to continue participating in your OSPF network. :)
adam.
On 26/11/2012 03:51, Maarten Kruyswijk wrote:
Arista is providing an OSPF-mib so I think they do...
Van: Tom Laermans <tom.laermans@powersource.cx mailto:tom.laermans@powersource.cx> Beantwoorden - Aan: Observium Network Observation System <observium@observium.org mailto:observium@observium.org> Datum: Saturday, November 24, 2012 12:41 AM Aan: <observium@observium.org mailto:observium@observium.org> Onderwerp: Re: [Observium] question about arista devices
Arista devices don't do OSPF-MIB currently; keep your eyes open for a release in the near future which does.
Re config tab... if your hostname in observium is the same as in rancid, it should work...
Tom
On 21/11/2012 16:52, Maarten Kruyswijk wrote:
Hi Addam,
I have checked. It should us the OSPF-MIB, but I think that because the device identifier is arista-eos it doesn't look for routing data?
As for the config tab. Not sure why that never should happen. It does it with cisco and juniper devices...
Van: Adam Armstrong <adama@memetic.org mailto:adama@memetic.org> Beantwoorden - Aan: Observium Network Observation System <observium@observium.org mailto:observium@observium.org> Datum: Wednesday, November 21, 2012 4:46 PM Aan: Observium Network Observation System <observium@observium.org mailto:observium@observium.org> Onderwerp: Re: [Observium] question about arista devices
OSPF data showing relies upon OSPF-MIB being populated by the device.
The routing tab won't show unless routing-protocol data has been found for that device.
As for the config tab... That should never happens :)
adam.
On 21/11/2012 09:25, Maarten Kruyswijk wrote:
Hi we have added a couple of arista devices to observium. But we are missing a few things. Ospf neighbours are not showing. The routing tab on the device page is not showing And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards, maarten
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
I will keep that in mind ;) Is there a specific eos where it had that problem? Or is it generic? Does this also goes for the bgp mib?
Op 26 nov. 2012 om 18:15 heeft "Adam Armstrong" adama@memetic.org het volgende geschreven:
Whilst OSPF-MIB support does exist on Arista devices, it is currently disabled as as default and requires a hidden command to enable because there are bugs in the underlying SNMP/routing code that can crash the whole OSPF process.
It's recommended that you do not enable OSPF-MIB if you want your device to continue participating in your OSPF network. :)
adam.
On 26/11/2012 03:51, Maarten Kruyswijk wrote:
Arista is providing an OSPF-mib so I think they do…
Van: Tom Laermans tom.laermans@powersource.cx Beantwoorden - Aan: Observium Network Observation System observium@observium.org Datum: Saturday, November 24, 2012 12:41 AM Aan: observium@observium.org Onderwerp: Re: [Observium] question about arista devices
Arista devices don't do OSPF-MIB currently; keep your eyes open for a release in the near future which does.
Re config tab... if your hostname in observium is the same as in rancid, it should work...
Tom
On 21/11/2012 16:52, Maarten Kruyswijk wrote:
Hi Addam,
I have checked. It should us the OSPF-MIB, but I think that because the device identifier is arista-eos it doesn't look for routing data?
As for the config tab. Not sure why that never should happen. It does it with cisco and juniper devices…
Van: Adam Armstrong adama@memetic.org Beantwoorden - Aan: Observium Network Observation System observium@observium.org Datum: Wednesday, November 21, 2012 4:46 PM Aan: Observium Network Observation System observium@observium.org Onderwerp: Re: [Observium] question about arista devices
OSPF data showing relies upon OSPF-MIB being populated by the device.
The routing tab won't show unless routing-protocol data has been found for that device.
As for the config tab... That should never happens :)
adam.
On 21/11/2012 09:25, Maarten Kruyswijk wrote:
Hi we have added a couple of arista devices to observium. But we are missing a few things. Ospf neighbours are not showing. The routing tab on the device page is not showing And the config tab is not coming up on the device page.
Are we doing something wrong? Or is it something we can easily fix?
Kind regards, maarten
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
On 26/11/2012 11:20, Maarten Kruyswijk wrote:
I will keep that in mind ;) Is there a specific eos where it had that problem? Or is it generic?
The bugs exist in all versions of EOS. Once they are fixed, OSPF-MIB support will be enabled by default.
Does this also goes for the bgp mib?
Not as far as I know.
adam.
Strange, see the snapshot from the device below, this one is running BGP and OSPF, but I don't see any routing information. Also not in the "global routing" tab. All the other devices are popping in there, but not the arista's. Can I do any debugging?
Van: Adam Armstrong adama@memetic.org Beantwoorden - Aan: Observium Network Observation System observium@observium.org Datum: Monday, November 26, 2012 6:27 PM Aan: Observium Network Observation System observium@observium.org Onderwerp: Re: [Observium] question about arista devices
On 26/11/2012 11:20, Maarten Kruyswijk wrote:
I will keep that in mind ;)
Is there a specific eos where it had that problem? Or is it generic?
The bugs exist in all versions of EOS. Once they are fixed, OSPF-MIB support will be enabled by default.
Does this also goes for the bgp mib?
Not as far as I know.
adam.
_______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (3)
-
Adam Armstrong -
Maarten Kruyswijk -
Tom Laermans