Hi all,

Our event log is clogging up with multiple current and voltage threshold entries, for example see below; Current gi24 PoE Current above threshold: 0.158 A (> 0.1155 A) Current gi3 PoE Current above threshold: 0.115 A (> 0.102 A) Voltage gi24 PoE Voltage above threshold: 119 V (> 63.25 V) Voltage gi9 PoE Voltage above threshold: 113 V (> 60.95 V)

Apologies if this is a dumb question, as I'm knew to the software, but does anyone know a good way of removing these entries besides adjusting the threshold of every network device. Monitoring voltages and currents isn't a high priority for us, so happy to turn these off globally.

Many thanks for your help.

Regards,

John Borrow Systems Administrator T: 02 8438 9432 M: 0419 269267

BENEDICT

HEAD OFFICE 11a Narabang Way, Belrose NSW 2085 PO Box 431, Frenchs Forest NSW 1640 T (02) 9986 3500 www.benedict.com.au