Distinct alerting when several custom OID on the same device
Hello,
I've finally succeed to create alerting on custom OID
Unfortunately, I'm now facing another issue
I've one device with 2 custom OIDs
* The device called "depanne" have 2 custom OID named "mailnotsent" and "checkdbconnection"
I 've created one alert with this basic condition
Currently if one of the 2 OID got a different value than 0, I receive the alert message "checkdbconnections fails" which correspond to the message I've defined
It's OK when "checkdbconnections" fails but not when "mailnotsent' fails
In other words, if the OID value for "mailnotsent" is not 0, I'm receiving a non-related message.
I would like to create one alert related to one OID
As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition
So I'm trying to filter thanks to the "association"
In the previous version (which is still the documented one) it was possible to specify a device and an entity
But as the current version no longer propose us a free field for this, I've tried to filter with several solution like this one
It unfortunately doesn't work.
How could I specify an alert is only linked to one OID ?
Best Regards
Thibault
What version are you running?
adam. On 2018-10-16 14:37:23, Thibault Richard via observium observium@observium.org wrote: Hello, I’ve finally succeed to create alerting on custom OID Unfortunately, I’m now facing another issue I’ve one device with 2 custom OIDs * The device called “depanne” have 2 custom OID named “mailnotsent” and “checkdbconnection” I ‘ve created one alert with this basic condition Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message. I would like to create one alert related to one OID As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition So I’m trying to filter thanks to the “association” In the previous version (which is still the documented one) it was possible to specify a device and an entity But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one It unfortunately doesn’t work. How could I specify an alert is only linked to one OID ? Best Regards Thibault
* Observium 18.9.9428 (stable) http://www.observium.org
De : observium observium-bounces@observium.org De la part de Adam Armstrong via observium Envoyé : mardi 16 octobre 2018 16:37 À : Thibault Richard via observium observium@observium.org Cc : Adam Armstrong adama@memetic.org Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
What version are you running?
adam.
On 2018-10-16 14:37:23, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hello,
I’ve finally succeed to create alerting on custom OID
Unfortunately, I’m now facing another issue
I’ve one device with 2 custom OIDs
* The device called “depanne” have 2 custom OID named “mailnotsent” and “checkdbconnection”
I ‘ve created one alert with this basic condition
Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined
It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails
In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message.
I would like to create one alert related to one OID
As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition
So I’m trying to filter thanks to the “association”
In the previous version (which is still the documented one) it was possible to specify a device and an entity
But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one
It unfortunately doesn’t work.
How could I specify an alert is only linked to one OID ?
Best Regards
Thibault
I'm pretty sure I fixed the bug you're hitting 2 weeks ago the first time you reported it :p
Adam.
Sent from BlueMail
On 16 Oct 2018, 16:03, at 16:03, Thibault Richard via observium observium@observium.org wrote:
- Observium 18.9.9428 (stable) http://www.observium.org
De : observium observium-bounces@observium.org De la part de Adam Armstrong via observium Envoyé : mardi 16 octobre 2018 16:37 À : Thibault Richard via observium observium@observium.org Cc : Adam Armstrong adama@memetic.org Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
What version are you running?
adam.
On 2018-10-16 14:37:23, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hello,
I’ve finally succeed to create alerting on custom OID
Unfortunately, I’m now facing another issue
I’ve one device with 2 custom OIDs
- The device called “depanne” have 2 custom OID named “mailnotsent” and
“checkdbconnection”
I ‘ve created one alert with this basic condition
Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined
It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails
In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message.
I would like to create one alert related to one OID
As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition
So I’m trying to filter thanks to the “association”
In the previous version (which is still the documented one) it was possible to specify a device and an entity
But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one
It unfortunately doesn’t work.
How could I specify an alert is only linked to one OID ?
Best Regards
Thibault
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello,
Actually, the +/- the same question was asked by John M and you’ve indeed answered you ‘ll fix it
I’ve updated to a recent version … tried with
And
Without any success
Is my way of doing wrong or is the bug still present ?
Best Regards
Thibault
De : Adam Armstrong adama@memetic.org Envoyé : mardi 16 octobre 2018 17:14 À : Thibault Richard via observium observium@observium.org Cc : Thibault Richard thibs@thibs.com Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
I'm pretty sure I fixed the bug you're hitting 2 weeks ago the first time you reported it :p
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=13688
On 16 Oct 2018, at 16:03, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
* Observium 18.9.9428 (stable) http://www.observium.org
De : observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > De la part de Adam Armstrong via observium Envoyé : mardi 16 octobre 2018 16:37 À : Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > Cc : Adam Armstrong <adama@memetic.org mailto:adama@memetic.org > Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
What version are you running?
adam.
On 2018-10-16 14:37:23, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hello,
I’ve finally succeed to create alerting on custom OID
Unfortunately, I’m now facing another issue
I’ve one device with 2 custom OIDs
* The device called “depanne” have 2 custom OID named “mailnotsent” and “checkdbconnection”
I ‘ve created one alert with this basic condition
Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined
It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails
In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message.
I would like to create one alert related to one OID
As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition
So I’m trying to filter thanks to the “association”
In the previous version (which is still the documented one) it was possible to specify a device and an entity
But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one
It unfortunately doesn’t work.
How could I specify an alert is only linked to one OID ?
Best Regards
Thibault
_____
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Ahh, it was the other guy who reported that?
It should be fixed. It was a bug with the SQL query generation, iirc.
Have you upgraded again?
Adam.
Sent from BlueMail
On 17 Oct 2018, 07:38, at 07:38, Thibault Richard via observium observium@observium.org wrote:
Hello,
Actually, the +/- the same question was asked by John M and you’ve indeed answered you ‘ll fix it
I’ve updated to a recent version … tried with
And
Without any success
Is my way of doing wrong or is the bug still present ?
Best Regards
Thibault
De : Adam Armstrong adama@memetic.org Envoyé : mardi 16 octobre 2018 17:14 À : Thibault Richard via observium observium@observium.org Cc : Thibault Richard thibs@thibs.com Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
I'm pretty sure I fixed the bug you're hitting 2 weeks ago the first time you reported it :p
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=13688
On 16 Oct 2018, at 16:03, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
- Observium 18.9.9428 (stable) http://www.observium.org
De : observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > De la part de Adam Armstrong via observium Envoyé : mardi 16 octobre 2018 16:37 À : Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > Cc : Adam Armstrong <adama@memetic.org mailto:adama@memetic.org > Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
What version are you running?
adam.
On 2018-10-16 14:37:23, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hello,
I’ve finally succeed to create alerting on custom OID
Unfortunately, I’m now facing another issue
I’ve one device with 2 custom OIDs
- The device called “depanne” have 2 custom OID named “mailnotsent” and
“checkdbconnection”
I ‘ve created one alert with this basic condition
Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined
It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails
In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message.
I would like to create one alert related to one OID
As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition
So I’m trying to filter thanks to the “association”
In the previous version (which is still the documented one) it was possible to specify a device and an entity
But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one
It unfortunately doesn’t work.
How could I specify an alert is only linked to one OID ?
Best Regards
Thibault
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Just looked on the dev system, it's still working from when I fixed it :)
http://zeta.memetic.org/~adama/monosnap/chrome_2018-10-17_14-06-57.png
adam. On 2018-10-17 12:18:32, Adam Armstrong via observium observium@observium.org wrote: Ahh, it was the other guy who reported that?
It should be fixed. It was a bug with the SQL query generation, iirc.
Have you upgraded again?
Adam.
Sent from BlueMail [http://www.bluemail.me/r?b=13688] On 17 Oct 2018, at 07:38, Thibault Richard via observium <observium@observium.org [mailto:observium@observium.org]> wrote: Hello, Actually, the +/- the same question was asked by John M and you’ve indeed answered you ‘ll fix it I’ve updated to a recent version … tried with And Without any success Is my way of doing wrong or is the bug still present ? Best Regards Thibault De : Adam Armstrong adama@memetic.org Envoyé : mardi 16 octobre 2018 17:14 À : Thibault Richard via observium observium@observium.org Cc : Thibault Richard thibs@thibs.com Objet : Re: [Observium] Distinct alerting when several custom OID on the same device I'm pretty sure I fixed the bug you're hitting 2 weeks ago the first time you reported it :p Adam. Sent from BlueMail [http://www.bluemail.me/r?b=13688] On 16 Oct 2018, at 16:03, Thibault Richard via observium <observium@observium.org [mailto:observium@observium.org]> wrote: * Observium 18.9.9428 (stable) [http://www.observium.org] De : observium <observium-bounces@observium.org [mailto:observium-bounces@observium.org]> De la part de Adam Armstrong via observium Envoyé : mardi 16 octobre 2018 16:37 À : Thibault Richard via observium <observium@observium.org [mailto:observium@observium.org]> Cc : Adam Armstrong <adama@memetic.org [mailto:adama@memetic.org]> Objet : Re: [Observium] Distinct alerting when several custom OID on the same device What version are you running? adam. On 2018-10-16 14:37:23, Thibault Richard via observium <observium@observium.org [mailto:observium@observium.org]> wrote: Hello, I’ve finally succeed to create alerting on custom OID Unfortunately, I’m now facing another issue I’ve one device with 2 custom OIDs * The device called “depanne” have 2 custom OID named “mailnotsent” and “checkdbconnection” I ‘ve created one alert with this basic condition Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message. I would like to create one alert related to one OID As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition So I’m trying to filter thanks to the “association” In the previous version (which is still the documented one) it was possible to specify a device and an entity But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one It unfortunately doesn’t work. How could I specify an alert is only linked to one OID ? Best Regards Thibault
observium mailing list observium@observium.org [mailto:observium@observium.org] http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium [http://postman.memetic.org/cgi-bin/mailman/listinfo/observium]
Hello Adam,
Thanks for your help. Indeed it was reported by another guy who already was at the step I’m now 😉
I ‘ve just updated the engine to 18.10.9472 (stable) with database schema 386
It wasn’t working with the “Alert check” created with previous version but as I’ve deleted and recreated the same “Alert check”, it’s now working like a charm
THANK YOU !
Best Regards
Thibault
De : observium observium-bounces@observium.org De la part de Adam Armstrong via observium Envoyé : mercredi 17 octobre 2018 15:08 À : Adam Armstrong via observium observium@observium.org Cc : Adam Armstrong adama@memetic.org Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
Just looked on the dev system, it's still working from when I fixed it :)
http://zeta.memetic.org/~adama/monosnap/chrome_2018-10-17_14-06-57.png
adam.
On 2018-10-17 12:18:32, Adam Armstrong via observium <observium@observium.org mailto:observium@observium.org > wrote:
Ahh, it was the other guy who reported that?
It should be fixed. It was a bug with the SQL query generation, iirc.
Have you upgraded again?
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=13688
On 17 Oct 2018, at 07:38, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hello,
Actually, the +/- the same question was asked by John M and you’ve indeed answered you ‘ll fix it
I’ve updated to a recent version … tried with
And
Without any success
Is my way of doing wrong or is the bug still present ?
Best Regards
Thibault
De : Adam Armstrong <adama@memetic.org mailto:adama@memetic.org > Envoyé : mardi 16 octobre 2018 17:14 À : Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > Cc : Thibault Richard <thibs@thibs.com mailto:thibs@thibs.com > Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
I'm pretty sure I fixed the bug you're hitting 2 weeks ago the first time you reported it :p
Adam.
Sent from BlueMail http://www.bluemail.me/r?b=13688
On 16 Oct 2018, at 16:03, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
* Observium 18.9.9428 (stable) http://www.observium.org
De : observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > De la part de Adam Armstrong via observium Envoyé : mardi 16 octobre 2018 16:37 À : Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > Cc : Adam Armstrong <adama@memetic.org mailto:adama@memetic.org > Objet : Re: [Observium] Distinct alerting when several custom OID on the same device
What version are you running?
adam.
On 2018-10-16 14:37:23, Thibault Richard via observium <observium@observium.org mailto:observium@observium.org > wrote:
Hello,
I’ve finally succeed to create alerting on custom OID
Unfortunately, I’m now facing another issue
I’ve one device with 2 custom OIDs
* The device called “depanne” have 2 custom OID named “mailnotsent” and “checkdbconnection”
I ‘ve created one alert with this basic condition
Currently if one of the 2 OID got a different value than 0, I receive the alert message “checkdbconnections fails” which correspond to the message I’ve defined
It’s OK when “checkdbconnections” fails but not when “mailnotsent’ fails
In other words, if the OID value for “mailnotsent” is not 0, I’m receiving a non-related message.
I would like to create one alert related to one OID
As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition
So I’m trying to filter thanks to the “association”
In the previous version (which is still the documented one) it was possible to specify a device and an entity
But as the current version no longer propose us a free field for this, I’ve tried to filter with several solution like this one
It unfortunately doesn’t work.
How could I specify an alert is only linked to one OID ?
Best Regards
Thibault
_____
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
_____
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
participants (2)
-
Adam Armstrong -
Thibault Richard