Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5... http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5.4.2.16.zip
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon
Hi
What OID would I be looking in/for?
Regards
Simon
On 4 Jul 2019, at 12:12, adama--- via observium observium@observium.org wrote:
Can you have a look for the poe statistics in the devices snmp output?
If it has per-device mibs that's a pain in the arse.
Adam.
Sent from my Huawei tablet
-------- Original Message -------- Subject: [Observium] Display poe power From: Simon Mousey Smith via observium To: Adam Armstrong via observium CC: Simon Mousey Smith
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5... http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5.4.2.16.zip
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Wherever it keeps its poe stats :)
Adam.
Sent from BlueMail
On 4 Jul 2019, 15:36, at 15:36, Simon Mousey Smith via observium observium@observium.org wrote:
Hi
What OID would I be looking in/for?
Regards
Simon
On 4 Jul 2019, at 12:12, adama--- via observium
observium@observium.org wrote:
Can you have a look for the poe statistics in the devices snmp
output?
If it has per-device mibs that's a pain in the arse.
Adam.
Sent from my Huawei tablet
-------- Original Message -------- Subject: [Observium] Display poe power From: Simon Mousey Smith via observium To: Adam Armstrong via observium CC: Simon Mousey Smith
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and
VOIP Phones
Is it possible to have observium display the outputs of the power
being provided to each port?
I have found the MIBs for this switch -
http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5... http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5.4.2.16.zip
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point
Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon _______________________________________________ observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Simon,
for this request better is write Jita ticket ;)
Anyway, please make snmp dump for this device as written below:
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1
myagent.snmpwalk
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk
Simon Mousey Smith via observium wrote on 03/07/2019 14:05:
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5...
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi,
Done - https://jira.observium.org/browse/OBS-3055
Regards
Simon
On 12 Jul 2019, at 11:15, Mike Stupalov mike@observium.org wrote:
Hi Simon,
for this request better is write Jita ticket ;)
Anyway, please make snmp dump for this device as written below:
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk
Simon Mousey Smith via observium wrote on 03/07/2019 14:05:
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5... http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5.4.2.16.zip
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org http://observium.org/
Pls try with r9969.
Simon Mousey Smith wrote on 12/07/2019 14:08:
Hi,
Done - https://jira.observium.org/browse/OBS-3055
Regards
Simon
On 12 Jul 2019, at 11:15, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Hi Simon,
for this request better is write Jita ticket ;)
Anyway, please make snmp dump for this device as written below:
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk
Simon Mousey Smith via observium wrote on 03/07/2019 14:05:
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5...
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org
Legend! Thank you!
Altho for some reason the power ports are all showing ‘warning’ even tho they are WAY below the max?
And the 'Port Sensors' on the devices ‘overview' tab are showing all the ports out of order e.g. g2, g8, g1, g3, g5, g4, g7, g6
Regards
Simon
On 12 Jul 2019, at 13:54, Mike Stupalov mike@observium.org wrote:
Pls try with r9969.
Simon Mousey Smith wrote on 12/07/2019 14:08:
Hi,
Done - https://jira.observium.org/browse/OBS-3055 https://jira.observium.org/browse/OBS-3055
Regards
Simon
On 12 Jul 2019, at 11:15, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Hi Simon,
for this request better is write Jita ticket ;)
Anyway, please make snmp dump for this device as written below:
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk
Simon Mousey Smith via observium wrote on 03/07/2019 14:05:
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5... http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5.4.2.16.zip
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon
observium mailing list observium@observium.org mailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org http://observium.org/
-- Mike Stupalov Observium Limited, http://observium.org http://observium.org/
Simon Mousey Smith wrote on 12/07/2019 16:43:
Legend! Thank you!
Altho for some reason the power ports are all showing ‘warning’ even tho they are WAY below the max?
fixed in r9970.
And the 'Port Sensors' on the devices ‘overview' tab are showing all the ports out of order e.g. g2, g8, g1, g3, g5, g4, g7, g6
Regards
Simon
On 12 Jul 2019, at 13:54, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Pls try with r9969.
Simon Mousey Smith wrote on 12/07/2019 14:08:
Hi,
Done - https://jira.observium.org/browse/OBS-3055
Regards
Simon
On 12 Jul 2019, at 11:15, Mike Stupalov <mike@observium.org mailto:mike@observium.org> wrote:
Hi Simon,
for this request better is write Jita ticket ;)
Anyway, please make snmp dump for this device as written below:
snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1 > myagent.snmpwalk snmpwalk -v2c -c <community> --hexOutputLength=0 -ObentxU <hostname> .1.3.6.1.4.1 >> myagent.snmpwalk
Simon Mousey Smith via observium wrote on 03/07/2019 14:05:
Hi All
We use a few Netgear GS110TP switches with POE for WiFi points and VOIP Phones
Is it possible to have observium display the outputs of the power being provided to each port?
I have found the MIBs for this switch - http://www.downloads.netgear.com/files/GDC/GS110TP/GS108Tv2_GS110TP%20MIB_V5...
A sample output shows in the web panel as the following
g2 Enable 16.2 Low 802.3af 4point Only 4 None 46 65 3.0 Class 15400 Delivering Power
Im also happy to help with any SNMP outputs from the switch needed :)
Regards
Simon
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov Observium Limited, http://observium.org
-- Mike Stupalov Observium Limited, http://observium.org
participants (4)
-
Adam Armstrong -
adama＠memetic.org
-
Mike Stupalov -
Simon Mousey Smith