Hi
I get "WARNING! Ports snmpwalk did not complete. Try to increase SNMP timeout on the device properties page." on one of my devices. Then I went to the device page and entered "300" as SNMP timeout, hit save and got told "Device SNMP configuration update is not required". What's next?
Best regards
Lars Joergensen IT Manager - Network Team - Global IT Chr. Hansen A/S - Boege Alle 10-12 - 2970 Hoersholm - Denmark
Phone: +45 52 18 05 22 dklarj@chr-hansen.commailto:dklarj@chr-hansen.com - www.chr-hansen.comhttp://www.chr-hansen.com/
[cid:image001.gif@01D690BF.ECC49DB0]
________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice
Hi guys,
I can put a little spin on the question since nobody had any input: Have anybody had issues monitoring Aruba switches in particular? Some of them seem to need some adjustment of SNMP timers and I'm looking for the right numbers.
Also, the bulkwalk seems to be set at 10 items by default (gathered from reading the docs). Should this be increased or decreased if devices are slow to complete SNMP queries?
Lars
From: observium observium-bounces@observium.org On Behalf Of Lars Joergensen via observium Sent: 22. september 2020 09:08 To: Observium observium@observium.org Cc: Lars Joergensen DKLARJ@chr-hansen.com Subject: [Observium] SNMP timeout adjustment
Hi
I get "WARNING! Ports snmpwalk did not complete. Try to increase SNMP timeout on the device properties page." on one of my devices. Then I went to the device page and entered "300" as SNMP timeout, hit save and got told "Device SNMP configuration update is not required". What's next?
________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice
It seems that you have discovered a bug in the snmp form, I'll have a look.
Adam.
From: observium observium-bounces@observium.org On Behalf Of Lars Joergensen via observium Sent: 24 September 2020 06:57 To: Observium observium@observium.org Cc: Lars Joergensen DKLARJ@chr-hansen.com Subject: Re: [Observium] SNMP timeout adjustment
Hi guys,
I can put a little spin on the question since nobody had any input: Have anybody had issues monitoring Aruba switches in particular? Some of them seem to need some adjustment of SNMP timers and I'm looking for the right numbers.
Also, the bulkwalk seems to be set at 10 items by default (gathered from reading the docs). Should this be increased or decreased if devices are slow to complete SNMP queries?
Lars
From: observium <observium-bounces@observium.org mailto:observium-bounces@observium.org > On Behalf Of Lars Joergensen via observium Sent: 22. september 2020 09:08 To: Observium <observium@observium.org mailto:observium@observium.org > Cc: Lars Joergensen <DKLARJ@chr-hansen.com mailto:DKLARJ@chr-hansen.com > Subject: [Observium] SNMP timeout adjustment
Hi
I get "WARNING! Ports snmpwalk did not complete. Try to increase SNMP timeout on the device properties page." on one of my devices. Then I went to the device page and entered "300" as SNMP timeout, hit save and got told "Device SNMP configuration update is not required". What's next?
_____
Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice
There no errors, just this is impossible timeout for snmpwalk.
300 seconds timeout.. you seriously? :) Your server will die if at least one device takes so long to respond..
set to 3,5.. max 10 seconds. Really if some device respond longer.. "bury the stewardess" :D
Lars Joergensen via observium wrote on 22.09.2020 10:08:
Hi
I get “WARNING! Ports snmpwalk did not complete. Try to increase SNMP timeout on the device properties page.” on one of my devices. Then I went to the device page and entered “300” as SNMP timeout, hit save and got told “Device SNMP configuration update is not required”. What’s next?
Best regards
*Lars Joergensen *IT Manager - Network Team - Global IT
Chr. Hansen A/S - Boege Alle 10-12 - 2970 Hoersholm - Denmark
Phone: +45 52 18 05 22 dklarj@chr-hansen.com mailto:dklarj@chr-hansen.com- www.chr-hansen.com http://www.chr-hansen.com/
Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Root cause was a bad line slowing things down. But thanks for giving me some numbers to work with.
From: Mike Stupalov mike@stupalov.ru On Behalf Of Mike Stupalov Sent: 24. september 2020 23:36 To: Observium observium@observium.org; Lars Joergensen via observium observium@observium.org Cc: Lars Joergensen DKLARJ@chr-hansen.com Subject: Re: [Observium] SNMP timeout adjustment
There no errors, just this is impossible timeout for snmpwalk.
300 seconds timeout.. you seriously? :) Your server will die if at least one device takes so long to respond..
set to 3,5.. max 10 seconds. Really if some device respond longer.. "bury the stewardess" :D
________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice
participants (3)
-
adama＠observium.org -
Lars Joergensen -
Mike Stupalov