Pseudowires

Peter Derissen

15 Feb 2018 15 Feb '18

8:24 a.m.

Hello,

In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances?

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

******** IMPORTANT NOTICE ******** This e-mail (including any attachments) may contain information that is confidential or otherwise protected from disclosure and it is intended only for the addressees. If you are not the intended recipient, please note that any copying, distribution or other use of information contained in this e-mail (and its attachments) is not allowed. If you have received this e-mail in error, kindly notify us immediately by telephone or e-mail and delete the message (including any attachments) from your system.

Please note that e-mail messages may contain computer viruses or other defects, may not be accurately replicated on other systems, or may be subject of unauthorized interception or other interference without the knowledge of sender or recipient. Eurofiber only sends and receives e-mails on the basis that Eurofiber is not responsible for any such computer viruses, corruption or other interference or any consequences thereof. Eurofiber Nederland B.V. is registered in the Chamber of Commerce of Amsterdam with number 34134377, VAT number NL 8088.51.524 B01.

Attachments:

attachment.html (text/html — 7.0 KB)
image001.jpg (image/jpeg — 4.3 KB)

Show replies by date

Adam Armstrong

15 Feb 15 Feb

9:19 a.m.

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam. On 2018-02-15 08:25:01, Peter Derissen peter.derissen@eurofiber.com wrote: Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup]

Youssef BENGELLOUN - ZAHR

9:22 a.m.

Peter Derissen

9:22 a.m.

root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.org Subject: Re: [Observium] Pseudowires

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Hello,

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Adam Armstrong

9:25 a.m.

Why would you do that from inside the mibs directory? oO

adam. On 2018-02-15 09:23:27, Peter Derissen peter.derissen@eurofiber.com wrote: root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.org Subject: Re: [Observium] Pseudowires is jnxVpnPwRowStatus populated on those devices? snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus adam. On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup]

Peter Derissen

9:28 a.m.

Sorry was just in that directory. Want me to do it from /opt/Observium?

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:26 To: observium@observium.org Subject: Re: [Observium] Pseudowires

Why would you do that from inside the mibs directory? oO

adam.

On 2018-02-15 09:23:27, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] Pseudowires

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Hello,

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Adam Armstrong

9:30 a.m.

Yup.

BTW, there's no need to go into the mibs directory, don't change anything in there. Just because something exists in there doesn't mean it's used. "updating" things in there will either do nothing, or break things.

adam. On 2018-02-15 09:29:07, Peter Derissen peter.derissen@eurofiber.com wrote: Sorry was just in that directory. Want me to do it from /opt/Observium? Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:26 To: observium@observium.org Subject: Re: [Observium] Pseudowires Why would you do that from inside the mibs directory? oO adam. On 2018-02-15 09:23:27, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires is jnxVpnPwRowStatus populated on those devices? snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus adam. On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup]

Peter Derissen

9:31 a.m.

Im not changing a thing above the opt/Observium/config.php 😊

Result:

root@Observium:/opt/observium# snmpbulkwalk -v2c -c vel0cirapt0r -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (LM-SENSORS-MIB): At line 4 in (none) Cannot find module (JUNIPER-VPN-MIB): At line 4 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:30 To: observium@observium.org Subject: Re: [Observium] Pseudowires

Yup.

adam.

On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium?

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:26 To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] Pseudowires

Why would you do that from inside the mibs directory? oO

adam.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Hello,

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Adam Armstrong

9:34 a.m.

That second : should be a / :D

adam. On 2018-02-15 09:32:00, Peter Derissen peter.derissen@eurofiber.com wrote: Im not changing a thing above the opt/Observium/config.php  Result: root@Observium:/opt/observium# snmpbulkwalk -v2c -c vel0cirapt0r -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (LM-SENSORS-MIB): At line 4 in (none) Cannot find module (JUNIPER-VPN-MIB): At line 4 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:30 To: observium@observium.org Subject: Re: [Observium] Pseudowires Yup. BTW, there's no need to go into the mibs directory, don't change anything in there. Just because something exists in there doesn't mean it's used. "updating" things in there will either do nothing, or break things. adam. On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium? Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:26 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires Why would you do that from inside the mibs directory? oO adam. On 2018-02-15 09:23:27, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires is jnxVpnPwRowStatus populated on those devices? snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus adam. On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup]

Peter Derissen

9:38 a.m.

Ok got something.

MIB search path: mibs/rfc:mibs/juniper Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-2/1/1.0".116265 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438 = INTEGER: active(1) root@Observium:/opt/observium#

Result only shows the l2circuits but not the routing-instances.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:35 To: observium@observium.org Subject: Re: [Observium] Pseudowires

That second : should be a / :D

adam.

On 2018-02-15 09:32:00, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Im not changing a thing above the opt/Observium/config.php 😊

Result:

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:30 To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] Pseudowires

Yup.

adam.

On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium?

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Why would you do that from inside the mibs directory? oO

adam.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Hello,

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Adam Armstrong

9:45 a.m.

You need to remove the MIB lines from /etc/snmp/snmp.conf XD

(or not use debian).

Odd. It seems your device is responding to the first query used to find J circuits.

./discovery.php -h <hostname> -m pseudowires -d

adam. On 2018-02-15 09:38:26, Peter Derissen peter.derissen@eurofiber.com wrote: Ok got something. MIB search path: mibs/rfc:mibs/juniper Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-2/1/1.0".116265 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438 = INTEGER: active(1) root@Observium:/opt/observium# Result only shows the l2circuits but not the routing-instances. Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:35 To: observium@observium.org Subject: Re: [Observium] Pseudowires That second : should be a / :D adam. On 2018-02-15 09:32:00, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Im not changing a thing above the opt/Observium/config.php  Result: root@Observium:/opt/observium# snmpbulkwalk -v2c -c vel0cirapt0r -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (LM-SENSORS-MIB): At line 4 in (none) Cannot find module (JUNIPER-VPN-MIB): At line 4 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:30 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires Yup. BTW, there's no need to go into the mibs directory, don't change anything in there. Just because something exists in there doesn't mean it's used. "updating" things in there will either do nothing, or break things. adam. On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium? Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:26 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires Why would you do that from inside the mibs directory? oO adam. On 2018-02-15 09:23:27, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires is jnxVpnPwRowStatus populated on those devices? snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus adam. On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup]

Peter Derissen

9:53 a.m.

Snmp.conf is empty.

# As the snmp packages come without MIB files due to license reasons, loading # of MIBs is disabled by default. If you added the MIBs you can reenable # loading them by commenting out the following line. #mibs :

##### Finished discovery run at 2018-02-15 10:51:44 #####

./discovery.php: pe3.asd0033 - 1 devices discovered in 1.631 secs

SQL[SELECT * FROM `observium_processes` WHERE `process_start` < '1518673902'] SQL RUNTIME[0.00022483s] NOTE, $config['snmp']['hide_auth'] is set to TRUE, snmp community and snmp v3 auth hidden from debug output. o Devices Discovered 1 o Discovery Time 1.631 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Cell[43/0.272s] Row[11/0.004s] Rows[13/0.196s] Column[0/0s] Update[5/0.038s] Insert[1/0.002s] Delete[1/0.003s] o RRDTool Usage root@Observium:/opt/observium#

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:45 To: observium@observium.org Subject: Re: [Observium] Pseudowires

You need to remove the MIB lines from /etc/snmp/snmp.conf XD

(or not use debian).

Odd. It seems your device is responding to the first query used to find J circuits.

./discovery.php -h <hostname> -m pseudowires -d

adam.

On 2018-02-15 09:38:26, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Ok got something.

Result only shows the l2circuits but not the routing-instances.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:35 To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] Pseudowires

That second : should be a / :D

adam.

On 2018-02-15 09:32:00, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Im not changing a thing above the opt/Observium/config.php 😊

Result:

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Yup.

adam.

On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium?

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Why would you do that from inside the mibs directory? oO

adam.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Hello,

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Adam Armstrong

9:55 a.m.

You missed out the entire discovery output :P

adam. On 2018-02-15 09:53:41, Peter Derissen peter.derissen@eurofiber.com wrote: Snmp.conf is empty. # As the snmp packages come without MIB files due to license reasons, loading # of MIBs is disabled by default. If you added the MIBs you can reenable # loading them by commenting out the following line. #mibs : ##### Finished discovery run at 2018-02-15 10:51:44 ##### ./discovery.php: pe3.asd0033 - 1 devices discovered in 1.631 secs SQL[SELECT * FROM `observium_processes` WHERE `process_start` < '1518673902'] SQL RUNTIME[0.00022483s] NOTE, $config['snmp']['hide_auth'] is set to TRUE, snmp community and snmp v3 auth hidden from debug output. o Devices Discovered 1 o Discovery Time 1.631 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Cell[43/0.272s] Row[11/0.004s] Rows[13/0.196s] Column[0/0s] Update[5/0.038s] Insert[1/0.002s] Delete[1/0.003s] o RRDTool Usage root@Observium:/opt/observium# Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:45 To: observium@observium.org Subject: Re: [Observium] Pseudowires You need to remove the MIB lines from /etc/snmp/snmp.conf XD

(or not use debian). Odd. It seems your device is responding to the first query used to find J circuits. ./discovery.php -h <hostname> -m pseudowires -d adam. On 2018-02-15 09:38:26, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Ok got something. MIB search path: mibs/rfc:mibs/juniper Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-2/1/1.0".116265 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437 = INTEGER: active(1) JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438 = INTEGER: active(1) root@Observium:/opt/observium# Result only shows the l2circuits but not the routing-instances. Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:35 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires That second : should be a / :D adam. On 2018-02-15 09:32:00, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Im not changing a thing above the opt/Observium/config.php  Result: root@Observium:/opt/observium# snmpbulkwalk -v2c -c vel0cirapt0r -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (LM-SENSORS-MIB): At line 4 in (none) Cannot find module (JUNIPER-VPN-MIB): At line 4 in (none) JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:30 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires Yup. BTW, there's no need to go into the mibs directory, don't change anything in there. Just because something exists in there doesn't mean it's used. "updating" things in there will either do nothing, or break things. adam. On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium? Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:26 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires Why would you do that from inside the mibs directory? oO adam. On 2018-02-15 09:23:27, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: root@Observium:/opt/observium/mibs# snmpbulkwalk -v2c -c <remove> -M mibs/rfc:mibs:juniper pe3.asd0033 JUNIPER-VPN-MIB::jnxVpnPwRowStatus MIB search path: mibs/rfc:mibs:juniper Cannot find module (SNMPv2-MIB): At line 10 in (none) Cannot find module (IF-MIB): At line 10 in (none) Cannot find module (IP-MIB): At line 10 in (none) Cannot find module (TCP-MIB): At line 10 in (none) Cannot find module (UDP-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-MIB): At line 10 in (none) Cannot find module (NOTIFICATION-LOG-MIB): At line 10 in (none) Cannot find module (DISMAN-EVENT-MIB): At line 10 in (none) Cannot find module (DISMAN-SCHEDULE-MIB): At line 10 in (none) Cannot find module (HOST-RESOURCES-TYPES): At line 10 in (none) Cannot find module (MTA-MIB): At line 10 in (none) Cannot find module (NETWORK-SERVICES-MIB): At line 10 in (none) Cannot find module (UCD-DISKIO-MIB): At line 10 in (none) Cannot find module (UCD-DLMOD-MIB): At line 10 in (none) Cannot find module (LM-SENSORS-MIB): At line 10 in (none) Cannot find module (UCD-SNMP-MIB): At line 10 in (none) Cannot find module (UCD-DEMO-MIB): At line 10 in (none) Cannot find module (SNMP-TARGET-MIB): At line 10 in (none) Cannot find module (NET-SNMP-AGENT-MIB): At line 10 in (none) Cannot find module (SNMP-MPD-MIB): At line 10 in (none) Cannot find module (SNMP-USER-BASED-SM-MIB): At line 10 in (none) Cannot find module (SNMP-FRAMEWORK-MIB): At line 10 in (none) Cannot find module (SNMP-VIEW-BASED-ACM-MIB): At line 10 in (none) Cannot find module (SNMP-COMMUNITY-MIB): At line 10 in (none) Cannot find module (IPV6-ICMP-MIB): At line 10 in (none) Cannot find module (IPV6-MIB): At line 10 in (none) Cannot find module (IPV6-TCP-MIB): At line 10 in (none) Cannot find module (IPV6-UDP-MIB): At line 10 in (none) Cannot find module (IP-FORWARD-MIB): At line 10 in (none) Cannot find module (NET-SNMP-PASS-MIB): At line 10 in (none) Cannot find module (NET-SNMP-EXTEND-MIB): At line 10 in (none) Cannot find module (SNMP-NOTIFICATION-MIB): At line 10 in (none) Cannot find module (SNMPv2-TM): At line 10 in (none) Cannot find module (NET-SNMP-VACM-MIB): At line 10 in (none) Cannot find module (INET-ADDRESS-MIB): At line 13 in juniper/JUNIPER-VPN-MIB Cannot find module (IF-MIB): At line 15 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-TC): At line 17 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMP-FRAMEWORK-MIB): At line 19 in juniper/JUNIPER-VPN-MIB Cannot find module (SNMPv2-SMI): At line 15 in juniper/JUNIPER-SMI Did not find 'enterprises' in module #-1 (juniper/JUNIPER-SMI) Unlinked OID in JUNIPER-SMI: juniperMIB ::= { enterprises 2636 } Undefined identifier: enterprises near line 17 of juniper/JUNIPER-SMI Did not find 'InetAddress' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InetAddressType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'InterfaceIndexOrZero' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'RowStatus' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'StorageType' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'SnmpAdminString' in module #-1 (juniper/JUNIPER-VPN-MIB) Did not find 'jnxMibs' in module JUNIPER-SMI (juniper/JUNIPER-VPN-MIB) Unlinked OID in JUNIPER-VPN-MIB: jnxVpnMIB ::= { jnxMibs 26 } Undefined identifier: jnxMibs near line 23 of juniper/JUNIPER-VPN-MIB JUNIPER-VPN-MIB::jnxVpnPwRowStatus: Unknown Object Identifier Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup] From: observium [mailto:observium-bounces@observium.org [mailto:observium-bounces@observium.org]] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:19 To: observium@observium.org [mailto:observium@observium.org] Subject: Re: [Observium] Pseudowires is jnxVpnPwRowStatus populated on those devices? snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus adam. On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.com [mailto:peter.derissen@eurofiber.com]> wrote: Hello, In the menu Ports -> Pseudowires -> All types i can only find the pseudowires that start on a cisco machine. Nu juniper are in that list (there are a few as destination node). Do I have to configure something to show the Juniper routing instances? Regards, Met vriendelijke groet, Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen [EF-logo_rood_RGB -handtekening] [http://www.eurofiber.nl/] Volg ons op Twitter [https://twitter.com/Eurofiber] | Linkedin [https://www.linkedin.com/company/eurofiber] | Youtube [https://www.youtube.com/user/Eurofibergroup]

Peter Derissen

10:06 a.m.

root@Observium:/opt/observium# ./discovery.php -h pe3.asd0033 -m pseudowires -d DEBUG!

CMD[/usr/bin/svn info /opt/observium]

CMD EXITCODE[0] CMD RUNTIME[0.0062s] STDOUT[ Path: . Working Copy Root Path: /opt/observium URL: http://svn.observium.org/svn/observium/branches/stable Relative URL: ^/observium/branches/stable Repository Root: http://svn.observium.org/svn Repository UUID: 61d68cd4-352d-0410-923a-c4978735b2b8 Revision: 9055 Node Kind: directory Schedule: normal Last Changed Author: adama Last Changed Rev: 9011 Last Changed Date: 2018-01-27 21:48:09 +0100 (Sat, 27 Jan 2018)

]

SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] SQL RUNTIME[0.00024605s]

SQL[SELECT @@SESSION.sql_mode;] SQL RUNTIME[0.00010204s]

SQL[SET SESSION `sql_mode` = 'NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION'] SQL RUNTIME[0.00010514s] DB mode(s) disabled: STRICT_TRANS_TABLES, ONLY_FULL_GROUP_BY

SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] SQL RUNTIME[0.00014091s]

SQL[SELECT * FROM `config`] SQL RUNTIME[0.00029397s]

___ _ _ / _ \ | |__ ___ ___ _ __ __ __(_) _ _ _ __ ___ | | | || '_ \ / __| / _ | '__|\ \ / /| || | | || '_ ` _ \ | |_| || |_) |__ | __/| | \ V / | || |_| || | | | | | ___/ |_.__/ |___/ ___||_| _/ |_| __,_||_| |_| |_| Observium Professional 18.1.9011 http://www.observium.org

CMD[/opt/observium/scripts/distro]

CMD[/usr/bin/env python --version 2>&1]

CMD EXITCODE[0] CMD RUNTIME[0.0023s] STDOUT[ Python 2.7.12 ]

SQL[SELECT version();] SQL RUNTIME[0.00011897s]

CMD[/usr/bin/snmpget --version 2>&1]

CMD EXITCODE[0] CMD RUNTIME[0.0019s] STDOUT[ NET-SNMP version: 5.7.3 ]

CMD[/usr/bin/rrdtool --version | head -n1]

CMD EXITCODE[0] CMD RUNTIME[0.007s] CMD EXITDELAY[10ms] STDOUT[ RRDtool 1.5.5 Copyright by Tobias Oetiker tobi@oetiker.ch ]

CMD[/usr/bin/rrdcached -h | head -n1]

CMD EXITCODE[0] CMD RUNTIME[0.0071s] STDOUT[ RRDCacheD 1.5.5 ]

CMD[/usr/sbin/apache2 -v | awk '/Server version:/ {print $3}']

CMD EXITCODE[0] CMD RUNTIME[0.0258s] CMD EXITDELAY[10ms] STDOUT[ Apache/2.4.18 ]

CMD[date "+%:z"]

CMD EXITCODE[0] CMD RUNTIME[0.0015s] STDOUT[ +01:00 ]

SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] SQL RUNTIME[0.00017691s]

SQL[SELECT @@SESSION.sql_mode;] SQL RUNTIME[0.00012612s]

SQL[SHOW VARIABLES LIKE 'character_set_connection'] SQL RUNTIME[0.04997516s]

##### Software versions #####

o OS Linux 4.4.0-97-generic [amd64] (Ubuntu 16.04) o Apache 2.4.18 o PHP 7.0.22-0ubuntu0.16.04.1 (OPcache: DISABLED) o Python 2.7.12 o MySQL 5.7.21-0ubuntu0.16.04.1 (extension: mysqli 5.0.12-dev) o SNMP NET-SNMP 5.7.3 o RRDtool 1.5.5 (rrdcached 1.5.5: unix:/var/run/rrdcached.sock)

##### Memory Limit #####

o PHP 2GB

##### MySQL mode #####

o MySQL NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION

##### Charset info #####

o PHP UTF-8 o MySQL utf8

##### Timezones info #####

o Date Thursday, 15-Feb-18 11:05:39 CET o PHP +01:00 o MySQL +01:00

SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'last_versioncheck';] SQL RUNTIME[0.00025105s]

SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'latest_rev';] SQL RUNTIME[0.00016689s] ##### Starting discovery run at 2018-02-15 11:05:39 #####

SQL[SELECT * FROM `devices` WHERE `disabled` = 0 AND `hostname` LIKE 'pe3.asd0033' AND `status` = '1' ORDER BY `last_discovered_timetaken` ASC] SQL RUNTIME[0.00065088s]

CMD[/usr/bin/snmpget -t '2' -r '5' -v2c -c *** -Pu -OQUst -m SNMPv2-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'pe3.asd0033':'161' sysObjectID.0 sysUpTime.0]

CMD EXITCODE[0] CMD RUNTIME[0.0146s] STDOUT[ sysObjectID.0 = enterprises.2636.1.1.1.2.25 sysUpTime.0 = 617272908 ] SNMP STATUS[TRUE]

SQL[SELECT * FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '209'] SQL RUNTIME[0.00029802s]

SQL[SELECT * FROM `observium_processes` WHERE `process_name` = 'discovery.php' AND `device_id` = '209'] SQL RUNTIME[0.00038004s]

CMD[/bin/ps -ww -o pid,ppid,uid,gid,tty,stat,time,lstart,args -p 5432]

CMD EXITCODE[0] CMD RUNTIME[0.0237s] STDOUT[ PID PPID UID GID TT STAT TIME STARTED COMMAND 5432 2873 0 0 pts/0 S+ 00:00:00 Thu Feb 15 11:05:38 2018 php ./discovery.php -h pe3.asd0033 -m pseudowires -d ]

SQL[INSERT INTO `observium_processes` (`process_pid`,`process_name`,`process_ppid`,`process_uid`,`process_command`,`process_start`,`device_id`) VALUES ('5432','discovery.php','2873','0','php ./discovery.php -h pe3.asd0033 -m pseudowires -d','1518689138','209')] SQL RUNTIME[0.00305200s] ##### pe3.asd0033 [209] #####

o OS Type junos o SNMP Version v2c o Last discovery 2018-02-15 11:03:44 o Last duration 0.81 seconds

##### Module Start: pseudowires #####

SQL[SELECT * FROM `pseudowires` WHERE `device_id` = '209'] SQL RUNTIME[0.00031114s]

SQL[SELECT `attrib_value` FROM `entity_attribs` WHERE `entity_type` = 'device' AND `entity_id` = '209' AND `attrib_type` = 'sysORID'] SQL RUNTIME[0.00019908s]

SQL[SELECT * FROM `observium_attribs`] SQL RUNTIME[0.00016713s] o JUNIPER-VPN-MIB CMD[/usr/bin/snmpbulkwalk -t '2' -r '5' -v2c -c *** -Pu -OQUs -m JUNIPER-VPN-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/juniper 'udp':'pe3.asd0033':'161' jnxVpnPwRowStatus]

CMD EXITCODE[0] CMD RUNTIME[0.0894s] STDOUT[ jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368 = active jnxVpnPwRowStatus.l2Circuit."xe-2/1/1.0".116265 = active jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437 = active jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438 = active ] SNMP STATUS[TRUE]

CMD[/usr/bin/snmpbulkwalk -t '2' -r '5' -v2c -c *** -Pu -OQUs -m JUNIPER-VPN-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/juniper 'udp':'pe3.asd0033':'161' jnxVpnPwAssociatedInterface]

CMD EXITCODE[0] CMD RUNTIME[0.086s] STDOUT[ jnxVpnPwAssociatedInterface.l2Circuit."ge-4/2/2.0".116368 = 116368 jnxVpnPwAssociatedInterface.l2Circuit."xe-2/1/1.0".116265 = 116265 jnxVpnPwAssociatedInterface.l2Circuit."xe-5/0/6.0".7437 = 7437 jnxVpnPwAssociatedInterface.l2Circuit."xe-5/0/7.0".7438 = 7438 ] SNMP STATUS[TRUE]

CMD EXITCODE[0] CMD RUNTIME[0.0884s] STDOUT[ jnxVpnPwLocalSiteId.l2Circuit."ge-4/2/2.0".116368 = 10006808 jnxVpnPwLocalSiteId.l2Circuit."xe-2/1/1.0".116265 = 64786 jnxVpnPwLocalSiteId.l2Circuit."xe-5/0/6.0".7437 = 10008068 jnxVpnPwLocalSiteId.l2Circuit."xe-5/0/7.0".7438 = 10008069 ] SNMP STATUS[TRUE]

CMD EXITCODE[0] CMD RUNTIME[0.0865s] STDOUT[ jnxVpnPwTunnelName.l2Circuit."ge-4/2/2.0".116368 = jnxVpnPwTunnelName.l2Circuit."xe-2/1/1.0".116265 = jnxVpnPwTunnelName.l2Circuit."xe-5/0/6.0".7437 = jnxVpnPwTunnelName.l2Circuit."xe-5/0/7.0".7438 = ] SNMP STATUS[TRUE]

CMD EXITCODE[0] CMD RUNTIME[0.0868s] STDOUT[ jnxVpnPwTunnelType.l2Circuit."ge-4/2/2.0".116368 = ldp jnxVpnPwTunnelType.l2Circuit."xe-2/1/1.0".116265 = ldp jnxVpnPwTunnelType.l2Circuit."xe-5/0/6.0".7437 = ldp jnxVpnPwTunnelType.l2Circuit."xe-5/0/7.0".7438 = ldp ] SNMP STATUS[TRUE]

CMD EXITCODE[0] CMD RUNTIME[0.0892s] STDOUT[ jnxVpnRemotePeIdAddrType.l2Circuit."ge-4/2/2.0".116368 = ipv4 jnxVpnRemotePeIdAddrType.l2Circuit."xe-2/1/1.0".116265 = ipv4 jnxVpnRemotePeIdAddrType.l2Circuit."xe-5/0/6.0".7437 = ipv4 jnxVpnRemotePeIdAddrType.l2Circuit."xe-5/0/7.0".7438 = ipv4 ] SNMP STATUS[TRUE]

CMD EXITCODE[0] CMD RUNTIME[0.0891s] STDOUT[ jnxVpnRemotePeIdAddress.l2Circuit."ge-4/2/2.0".116368 = "10.31.0.7" jnxVpnRemotePeIdAddress.l2Circuit."xe-2/1/1.0".116265 = "10.31.0.77" jnxVpnRemotePeIdAddress.l2Circuit."xe-5/0/6.0".7437 = "10.31.0.93" jnxVpnRemotePeIdAddress.l2Circuit."xe-5/0/7.0".7438 = "10.31.0.93" ] SNMP STATUS[TRUE]

CMD EXITCODE[0] CMD RUNTIME[0.0856s] STDOUT[ jnxVpnPwRemoteSiteId.l2Circuit."ge-4/2/2.0".116368 = 10006808 jnxVpnPwRemoteSiteId.l2Circuit."xe-2/1/1.0".116265 = 64786 jnxVpnPwRemoteSiteId.l2Circuit."xe-5/0/6.0".7437 = 10008068 jnxVpnPwRemoteSiteId.l2Circuit."xe-5/0/7.0".7438 = 10008069 ] SNMP STATUS[TRUE]

CMD[/usr/bin/snmptranslate -On -m JUNIPER-VPN-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/juniper 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368']

CMD EXITCODE[0] CMD RUNTIME[0.0066s] STDOUT[ .1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.103.101.45.52.47.50.47.50.46.48.116368 ] SNMP TRANSLATE (CMD): 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."ge-4/2/2.0".116368' -> '.1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.103.101.45.52.47.50.47.50.46.48.116368'

SQL[SELECT `device_id` FROM `ipv4_addresses` LEFT JOIN `ports` USING(`port_id`) WHERE `ipv4_address` = '10.31.0.7' LIMIT 1;] SQL RUNTIME[0.00050116s]

SQL[SELECT `port_id` FROM `ports` WHERE `device_id` = '209' AND `ifIndex` = '116368' LIMIT 1] SQL RUNTIME[0.00017691s]

SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '367552'] SQL RUNTIME[0.00023890s]

SQL[SELECT * FROM `devices` WHERE `device_id` = '209'] SQL RUNTIME[0.00022316s]

SQL[SELECT * FROM `device_graphs` WHERE `device_id` = '209'] SQL RUNTIME[0.00023007s]

CMD EXITCODE[0] CMD RUNTIME[0.0069s] STDOUT[ .1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.120.101.45.50.47.49.47.49.46.48.116265 ] SNMP TRANSLATE (CMD): 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-2/1/1.0".116265' -> '.1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.120.101.45.50.47.49.47.49.46.48.116265'

SQL[SELECT `device_id` FROM `ipv4_addresses` LEFT JOIN `ports` USING(`port_id`) WHERE `ipv4_address` = '10.31.0.77' LIMIT 1;] SQL RUNTIME[0.00037313s]

SQL[SELECT `port_id` FROM `ports` WHERE `device_id` = '209' AND `ifIndex` = '116265' LIMIT 1] SQL RUNTIME[0.00019383s]

SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '367527'] SQL RUNTIME[0.00026894s]

CMD[/usr/bin/snmptranslate -On -m JUNIPER-VPN-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/juniper 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437']

CMD EXITCODE[0] CMD RUNTIME[0.0069s] STDOUT[ .1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.120.101.45.53.47.48.47.54.46.48.7437 ] SNMP TRANSLATE (CMD): 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/6.0".7437' -> '.1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.120.101.45.53.47.48.47.54.46.48.7437'

SQL[SELECT `device_id` FROM `ipv4_addresses` LEFT JOIN `ports` USING(`port_id`) WHERE `ipv4_address` = '10.31.0.93' LIMIT 1;] SQL RUNTIME[0.00036693s]

SQL[SELECT `port_id` FROM `ports` WHERE `device_id` = '209' AND `ifIndex` = '7437' LIMIT 1] SQL RUNTIME[0.00021291s]

SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '360892'] SQL RUNTIME[0.00026608s]

CMD[/usr/bin/snmptranslate -On -m JUNIPER-VPN-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/juniper 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438']

CMD EXITCODE[0] CMD RUNTIME[0.0069s] STDOUT[ .1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.120.101.45.53.47.48.47.55.46.48.7438 ] SNMP TRANSLATE (CMD): 'JUNIPER-VPN-MIB::jnxVpnPwRowStatus.l2Circuit."xe-5/0/7.0".7438' -> '.1.3.6.1.4.1.2636.3.26.1.4.1.4.5.10.120.101.45.53.47.48.47.55.46.48.7438'

SQL[SELECT `device_id` FROM `ipv4_addresses` LEFT JOIN `ports` USING(`port_id`) WHERE `ipv4_address` = '10.31.0.93' LIMIT 1;] SQL RUNTIME[0.00038815s]

SQL[SELECT `port_id` FROM `ports` WHERE `device_id` = '209' AND `ifIndex` = '7438' LIMIT 1] SQL RUNTIME[0.00019813s]

SQL[SELECT * FROM `ports` WHERE `ports`.`port_id` = '360893'] SQL RUNTIME[0.00029802s]

...

$valid[$module] /opt/observium/includes/discovery/pseudowires.inc.php:48

array( [JUNIPER-VPN-MIB] => array( [48855] => string(5) "48855" [48856] => string(5) "48856" [48857] => string(5) "48857" [48858] => string(5) "48858" ) )

o Changes 4 unchanged o Duration 0.7931s

SQL[UPDATE `devices` set `last_discovered` =NOW(),`type` ='network',`last_discovered_timetaken` ='0.8224',`force_discovery` ='0' WHERE `device_id` = '209'] SQL RUNTIME[0.00185680s] ##### pe3.asd0033 [209] completed discovery modules at 2018-02-15 11:05:40 #####

o Discovery time 0.8224 seconds

SQL[DELETE FROM `observium_processes` WHERE `process_pid` = '5432' AND `process_name` = 'discovery.php' AND `device_id` = '209'] SQL RUNTIME[0.00101805s] ##### Finished discovery run at 2018-02-15 11:05:40 #####

./discovery.php: pe3.asd0033 - 1 devices discovered in 0.979 secs

SQL[SELECT * FROM `observium_processes` WHERE `process_start` < '1518674739'] SQL RUNTIME[0.00026083s] NOTE, $config['snmp']['hide_auth'] is set to TRUE, snmp community and snmp v3 auth hidden from debug output. o Devices Discovered 1 o Discovery Time 0.979 secs o Memory usage 12MB (peak: 14MB) o MySQL Usage Cell[12/0.004s] Row[10/0.004s] Rows[9/0.054s] Column[0/0s] Update[1/0.002s] Insert[1/0.003s] Delete[1/0.001s] o RRDTool Usage root@Observium:/opt/observium# exit exit peter@Observium:~$ exit logout

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:56 To: observium@observium.org Subject: Re: [Observium] Pseudowires

You missed out the entire discovery output :P

adam.

On 2018-02-15 09:53:41, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Snmp.conf is empty.

##### Finished discovery run at 2018-02-15 10:51:44 #####

./discovery.php: pe3.asd0033 - 1 devices discovered in 1.631 secs

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Adam Armstrong Sent: donderdag 15 februari 2018 10:45 To: observium@observium.orgmailto:observium@observium.org Subject: Re: [Observium] Pseudowires

You need to remove the MIB lines from /etc/snmp/snmp.conf XD

(or not use debian).

Odd. It seems your device is responding to the first query used to find J circuits.

./discovery.php -h <hostname> -m pseudowires -d

adam.

On 2018-02-15 09:38:26, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Ok got something.

Result only shows the l2circuits but not the routing-instances.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

That second : should be a / :D

adam.

On 2018-02-15 09:32:00, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Im not changing a thing above the opt/Observium/config.php 😊

Result:

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Yup.

adam.

On 2018-02-15 09:29:07, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Sorry was just in that directory. Want me to do it from /opt/Observium?

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Why would you do that from inside the mibs directory? oO

adam.

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

is jnxVpnPwRowStatus populated on those devices?

snmpbulkwalk -v2c -c <community> -M mibs/rfc:mibs:juniper <hostname> JUNIPER-VPN-MIB::jnxVpnPwRowStatus

adam.

On 2018-02-15 08:25:01, Peter Derissen <peter.derissen@eurofiber.commailto:peter.derissen@eurofiber.com> wrote: Hello,

Regards,

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

Peter Derissen

10:13 a.m.

Just some info.

These are the config lines on 1 router with the word “routing-instance”

peter@PE3.ASD0033_re0> show configuration | display set | match routing-instance | count Count: 33909 lines

Met vriendelijke groet,

Peter Derissen Eurofiber Nederland Network Engineer Safariweg 25-31 +31 (0)6 11587110 3605 MA Maarssen

[EF-logo_rood_RGB -handtekening]http://www.eurofiber.nl/

Volg ons op Twitterhttps://twitter.com/Eurofiber | Linkedinhttps://www.linkedin.com/company/eurofiber | Youtubehttps://www.youtube.com/user/Eurofibergroup

From: observium [mailto:observium-bounces@observium.org] On Behalf Of Peter Derissen Sent: donderdag 15 februari 2018 11:07 To: Observium observium@observium.org Subject: Re: [Observium] Pseudowires

Deze afzender heeft onze fraudedetectiecontroles niet doorstaan en gebruikt mogelijk een vals adres. Meer informatie over adresvervalsinghttp://aka.ms/LearnAboutSpoofing

Feedbackhttp://aka.ms/SafetyTipsFeedback

root@Observium:/opt/observium# ./discovery.php -h pe3.asd0033 -m pseudowires -d DEBUG!

CMD[/usr/bin/svn info /opt/observium]

]

SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] SQL RUNTIME[0.00024605s]

SQL[SELECT @@SESSION.sql_mode;] SQL RUNTIME[0.00010204s]

SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] SQL RUNTIME[0.00014091s]

SQL[SELECT * FROM `config`] SQL RUNTIME[0.00029397s]

CMD[/opt/observium/scripts/distro]

CMD[/usr/bin/env python --version 2>&1]

CMD EXITCODE[0] CMD RUNTIME[0.0023s] STDOUT[ Python 2.7.12 ]

SQL[SELECT version();] SQL RUNTIME[0.00011897s]

CMD[/usr/bin/snmpget --version 2>&1]

CMD EXITCODE[0] CMD RUNTIME[0.0019s] STDOUT[ NET-SNMP version: 5.7.3 ]

CMD[/usr/bin/rrdtool --version | head -n1]

CMD EXITCODE[0] CMD RUNTIME[0.007s] CMD EXITDELAY[10ms] STDOUT[ RRDtool 1.5.5 Copyright by Tobias Oetiker <tobi@oetiker.chmailto:tobi@oetiker.ch> ]