MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
It is possible add support for LAN Controller?
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.org Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
MIB attached for LAN Controller
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.net Odesláno: 18. ledna 2017 17:29 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.org Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
Hi,
this MIB already exist in our code, but this MIB not correct for this devices (because tinycontrol devices used same oid tree as servercontrol).
I have correct MIB for such devices (LAN-MODULE), but I need access to real device(s). Can you provide snmp access to an device?
My dev IPs: 77.222.50.30, 2a02:408:7722:5030::5030
On 19.01.17 12:27, chott@praha1.net wrote:
MIB attached for LAN Controller
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* chott@praha1.net *Odesláno:* 18. ledna 2017 17:29 *Komu:* Observium Network Observation System *Předmět:* RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] *Odesláno:* 15. ledna 2017 22:54 *Komu:* observium@observium.org *Předmět:* [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Thank you for help
after lunch i prepair device
at this moment Tiny has two HW revision 2/3, i check SNMPwalk for both devices and send IPs
Tomas
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Mike Stupalov [mike@observium.org] Odesláno: 19. ledna 2017 11:13 Komu: Observium Network Observation System Předmět: Re: [Observium] MIB Sensorgateway
Hi,
this MIB already exist in our code, but this MIB not correct for this devices (because tinycontrol devices used same oid tree as servercontrol).
I have correct MIB for such devices (LAN-MODULE), but I need access to real device(s). Can you provide snmp access to an device?
My dev IPs: 77.222.50.30, 2a02:408:7722:5030::5030
On 19.01.17 12:27, chott@praha1.netmailto:chott@praha1.net wrote: MIB attached for LAN Controller
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.netmailto:chott@praha1.net Odesláno: 18. ledna 2017 17:29 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.orgmailto:observium-bounces@observium.org] za uživatele chott@praha1.netmailto:chott@praha1.net [chott@praha1.netmailto:chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.orgmailto:observium@observium.org Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org
Hi Mike,
194.116.126.233 HW version 2 software version 3.15.
if you have any problem just write me.
Alessandro
-- -- Alessandro Galardini TOP-IX - Torino Piemonte Internet Exchange Via Maria Vittoria 38 - 10123 Torino, Italy http://www.top-ix.org/
mob: +39 3385366334 fax: +39 0118802619 skype: alexgalardini
2017-01-19 11:13 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
this MIB already exist in our code, but this MIB not correct for this devices (because tinycontrol devices used same oid tree as servercontrol).
I have correct MIB for such devices (LAN-MODULE), but I need access to real device(s). Can you provide snmp access to an device?
My dev IPs: 77.222.50.30, 2a02:408:7722:5030::5030
On 19.01.17 12:27, chott@praha1.net wrote:
MIB attached for LAN Controller
[image: email-header-praha1]
*Tomas Chott technický ředitel*
chott@praha1.net Phone:
- +420 245 004 005 <+420%20245%20004%20005> *Mobile:* +420 733 123 135
<+420%20733%20123%20135>*
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net
[image: Popis: Facebook] http://www.facebook.com/praha1net
http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* chott@praha1.net *Odesláno:* 18. ledna 2017 17:29 *Komu:* Observium Network Observation System *Předmět:* RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[image: email-header-praha1]
*Tomas Chott technický ředitel*
chott@praha1.net Phone:
- +420 245 004 005 *Mobile:* +420 733 123 135 <+420%20733%20123%20135>*
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net
[image: Popis: Facebook] http://www.facebook.com/praha1net
http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] *Odesláno:* 15. ledna 2017 22:54 *Komu:* observium@observium.org *Předmět:* [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/ tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/ observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[image: email-header-praha1]
*Tomas Chott technický ředitel*
chott@praha1.net Phone:
- +420 245 004 005 *Mobile:* +420 733 123 135*
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net
[image: Popis: Facebook] http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Mike,
the correct IP is 194.116.126.17 - sorry, mistyped!
The LanController HW version 3 with firmware v1.22b is on IP 194.116.126.18.
Default SNMP v1 with community public.
If anybody need access, please write me the IP to be allowed.
Alessandro
-- -- Alessandro Galardini TOP-IX - Torino Piemonte Internet Exchange Via Maria Vittoria 38 - 10123 Torino, Italy http://www.top-ix.org/
mob: +39 3385366334 fax: +39 0118802619 skype: alexgalardini
2017-01-22 10:30 GMT+01:00 Alessandro Galardini < alessandro.galardini@top-ix.org>:
Hi Mike,
194.116.126.233 HW version 2 software version 3.15.
if you have any problem just write me.
Alessandro
--
Alessandro Galardini TOP-IX - Torino Piemonte Internet Exchange Via Maria Vittoria 38 - 10123 Torino, Italy http://www.top-ix.org/
mob: +39 3385366334 fax: +39 0118802619 skype: alexgalardini
2017-01-19 11:13 GMT+01:00 Mike Stupalov mike@observium.org:
Hi,
this MIB already exist in our code, but this MIB not correct for this devices (because tinycontrol devices used same oid tree as servercontrol).
I have correct MIB for such devices (LAN-MODULE), but I need access to real device(s). Can you provide snmp access to an device?
My dev IPs: 77.222.50.30, 2a02:408:7722:5030::5030
On 19.01.17 12:27, chott@praha1.net wrote:
MIB attached for LAN Controller
[image: email-header-praha1]
*Tomas Chott technický ředitel*
chott@praha1.net Phone:
- +420 245 004 005 <+420%20245%20004%20005> *Mobile:* +420 733 123 135
<+420%20733%20123%20135>*
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net
[image: Popis: Facebook] http://www.facebook.com/praha1net
http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* chott@praha1.net *Odesláno:* 18. ledna 2017 17:29 *Komu:* Observium Network Observation System *Předmět:* RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[image: email-header-praha1]
*Tomas Chott technický ředitel*
chott@praha1.net Phone:
- +420 245 004 005 *Mobile:* +420 733 123 135 <+420%20733%20123%20135>*
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net
[image: Popis: Facebook] http://www.facebook.com/praha1net
http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] *Odesláno:* 15. ledna 2017 22:54 *Komu:* observium@observium.org *Předmět:* [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tiny control/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/ob servium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[image: email-header-praha1]
*Tomas Chott technický ředitel*
chott@praha1.net Phone:
- +420 245 004 005 *Mobile:* +420 733 123 135*
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net
[image: Popis: Facebook] http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
observium mailing listobservium@observium.orghttp://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalovhttp://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello Mike,
one more time
HW version 2 SW ver 3.13 snmpwalk -v 1 -c lsg 176.101.146.3
HW version 3 SW ver 1.26b snmpwalk -v 1 -c public 176.101.146.3:1161
There is lot of different HWv2 and HWv3, HWv3 support OID: iso.3.6.1.4.1.7616.3 http://tinycontrol.pl/forum/viewtopic.php?f=28&t=6006http://tinycontrol....
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Alessandro Galardini [alessandro.galardini@top-ix.org] Odesláno: 23. ledna 2017 9:31 Komu: Observium Network Observation System Předmět: Re: [Observium] MIB Sensorgateway
Hi Mike,
the correct IP is 194.116.126.17 - sorry, mistyped!
The LanController HW version 3 with firmware v1.22b is on IP 194.116.126.18.
Default SNMP v1 with community public.
If anybody need access, please write me the IP to be allowed.
Alessandro
-- -- Alessandro Galardini TOP-IX - Torino Piemonte Internet Exchange Via Maria Vittoria 38 - 10123 Torino, Italy http://www.top-ix.org/
mob: +39 3385366334tel:%2B39%203385366334 fax: +39 0118802619tel:%2B39%200118802619 skype: alexgalardini
2017-01-22 10:30 GMT+01:00 Alessandro Galardini <alessandro.galardini@top-ix.orgmailto:alessandro.galardini@top-ix.org>: Hi Mike,
194.116.126.233 HW version 2 software version 3.15.
if you have any problem just write me.
Alessandro
-- -- Alessandro Galardini TOP-IX - Torino Piemonte Internet Exchange Via Maria Vittoria 38 - 10123 Torino, Italy http://www.top-ix.org/
mob: +39 3385366334tel:%2B39%203385366334 fax: +39 0118802619tel:%2B39%200118802619 skype: alexgalardini
2017-01-19 11:13 GMT+01:00 Mike Stupalov <mike@observium.orgmailto:mike@observium.org>: Hi,
this MIB already exist in our code, but this MIB not correct for this devices (because tinycontrol devices used same oid tree as servercontrol).
I have correct MIB for such devices (LAN-MODULE), but I need access to real device(s). Can you provide snmp access to an device?
My dev IPs: 77.222.50.30, 2a02:408:7722:5030::5030
On 19.01.17 12:27, chott@praha1.netmailto:chott@praha1.net wrote: MIB attached for LAN Controller
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005tel:+420%20245%20004%20005 Mobile: +420 733 123 135tel:+420%20733%20123%20135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.netmailto:chott@praha1.net Odesláno: 18. ledna 2017 17:29 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135tel:+420%20733%20123%20135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.orgmailto:observium-bounces@observium.org] za uživatele chott@praha1.netmailto:chott@praha1.net [chott@praha1.netmailto:chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.orgmailto:observium@observium.org Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
-- Mike Stupalov http://observium.org
_______________________________________________ observium mailing list observium@observium.orgmailto:observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hi Tomas and Alessandro and other,
I tested output for which you have given me access.
everything is bad :) there is no way to understand exactly what kind of sensors. the data do not correspond to MIBs..
FW3 walk: RFC1213-MIB::sysDescr.0 = STRING: "3.13" RFC1213-MIB::sysObjectID.0 = OID: LAN-MODULE::lan-module RFC1213-MIB::sysUpTime.0 = Timeticks: (145433837) 16 days, 19:58:58.37 RFC1213-MIB::sysContact.0 = STRING: "LAN_SWITCH-HOME" LAN-MODULE::trapReceiverNumber.1 = INTEGER: 1 LAN-MODULE::trapEnabled.1 = INTEGER: No(0) LAN-MODULE::trapReceiverIPAddress.1 = IpAddress: 10.58.252.2 LAN-MODULE::trapCommunity.1 = Hex-STRING: 00 LAN-MODULE::out0.0 = INTEGER: OFF(1) LAN-MODULE::out1.0 = INTEGER: OFF(1) LAN-MODULE::out2.0 = INTEGER: OFF(1) LAN-MODULE::out3.0 = INTEGER: OFF(1) LAN-MODULE::out4.0 = INTEGER: OFF(1) LAN-MODULE::out5.0 = INTEGER: ON(0) LAN-MODULE::outall.0 = Wrong Type (should be INTEGER): NULL LAN-MODULE::temp.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::vcc.0 = Wrong Type (should be OCTET STRING): INTEGER: 122 LAN-MODULE::inp1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp2.0 = Wrong Type (should be OCTET STRING): INTEGER: 3 LAN-MODULE::inp3.0 = Wrong Type (should be OCTET STRING): INTEGER: 4326 LAN-MODULE::inp4.0 = Wrong Type (should be OCTET STRING): INTEGER: 575 LAN-MODULE::inp5.0 = Wrong Type (should be OCTET STRING): INTEGER: 25 LAN-MODULE::inp6.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::inp7.0 = Wrong Type (should be OCTET STRING): INTEGER: 215 LAN-MODULE::inp8.0 = Wrong Type (should be OCTET STRING): INTEGER: 236 LAN-MODULE::inp9.0 = Wrong Type (should be OCTET STRING): INTEGER: 231 LAN-MODULE::inp10.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::inp11.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::DTH22-1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::DTH22-2.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::esense.3.0 = INTEGER: 0 LAN-MODULE::i3xi5.0 = Wrong Type (should be OCTET STRING): INTEGER: 14550 LAN-MODULE::Pxt.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D-24H.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp1Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp2Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp3Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp4Digital.0 = INTEGER: HIGH(1) End of MIB
For Alessandro, your device used complete other oid tree, for which I not have any MIBs: .1.3.6.1.4.1.7616:
SNMPv2-SMI::enterprises.7616.3.1.0.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.6.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.7.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.8.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.9.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.1.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.2.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.3.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.4.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.3.1.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.2.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.3.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.4.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.7.0 = INTEGER: 2495 SNMPv2-SMI::enterprises.7616.3.3.8.0 = INTEGER: 3400 SNMPv2-SMI::enterprises.7616.3.4.1.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.2.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.3.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.4.0 = INTEGER: 220 SNMPv2-SMI::enterprises.7616.3.4.5.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.6.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.7.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.8.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.9.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.4.10.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.7.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.8.0 = INTEGER: 0 End of MIB
On 19.01.17 12:27, chott@praha1.net wrote:
MIB attached for LAN Controller
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* chott@praha1.net *Odesláno:* 18. ledna 2017 17:29 *Komu:* Observium Network Observation System *Předmět:* RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] *Odesláno:* 15. ledna 2017 22:54 *Komu:* observium@observium.org *Předmět:* [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SN
Someone email this vendor and demand non-retarded firware and mibs.
God.
Adam.
Sent from BlueMail
On 23 Jan 2017, 11:37, at 11:37, Mike Stupalov mike@observium.org wrote:
Hi Tomas and Alessandro and other,
I tested output for which you have given me access.
everything is bad :) there is no way to understand exactly what kind of sensors. the data do not correspond to MIBs..
FW3 walk: RFC1213-MIB::sysDescr.0 = STRING: "3.13" RFC1213-MIB::sysObjectID.0 = OID: LAN-MODULE::lan-module RFC1213-MIB::sysUpTime.0 = Timeticks: (145433837) 16 days, 19:58:58.37 RFC1213-MIB::sysContact.0 = STRING: "LAN_SWITCH-HOME" LAN-MODULE::trapReceiverNumber.1 = INTEGER: 1 LAN-MODULE::trapEnabled.1 = INTEGER: No(0) LAN-MODULE::trapReceiverIPAddress.1 = IpAddress: 10.58.252.2 LAN-MODULE::trapCommunity.1 = Hex-STRING: 00 LAN-MODULE::out0.0 = INTEGER: OFF(1) LAN-MODULE::out1.0 = INTEGER: OFF(1) LAN-MODULE::out2.0 = INTEGER: OFF(1) LAN-MODULE::out3.0 = INTEGER: OFF(1) LAN-MODULE::out4.0 = INTEGER: OFF(1) LAN-MODULE::out5.0 = INTEGER: ON(0) LAN-MODULE::outall.0 = Wrong Type (should be INTEGER): NULL LAN-MODULE::temp.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::vcc.0 = Wrong Type (should be OCTET STRING): INTEGER: 122 LAN-MODULE::inp1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp2.0 = Wrong Type (should be OCTET STRING): INTEGER: 3 LAN-MODULE::inp3.0 = Wrong Type (should be OCTET STRING): INTEGER: 4326 LAN-MODULE::inp4.0 = Wrong Type (should be OCTET STRING): INTEGER: 575 LAN-MODULE::inp5.0 = Wrong Type (should be OCTET STRING): INTEGER: 25 LAN-MODULE::inp6.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::inp7.0 = Wrong Type (should be OCTET STRING): INTEGER: 215 LAN-MODULE::inp8.0 = Wrong Type (should be OCTET STRING): INTEGER: 236 LAN-MODULE::inp9.0 = Wrong Type (should be OCTET STRING): INTEGER: 231 LAN-MODULE::inp10.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::inp11.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::DTH22-1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::DTH22-2.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::esense.3.0 = INTEGER: 0 LAN-MODULE::i3xi5.0 = Wrong Type (should be OCTET STRING): INTEGER: 14550 LAN-MODULE::Pxt.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D-24H.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp1Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp2Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp3Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp4Digital.0 = INTEGER: HIGH(1) End of MIB
For Alessandro, your device used complete other oid tree, for which I not have any MIBs: .1.3.6.1.4.1.7616:
SNMPv2-SMI::enterprises.7616.3.1.0.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.6.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.7.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.8.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.9.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.1.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.2.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.3.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.4.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.3.1.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.2.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.3.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.4.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.7.0 = INTEGER: 2495 SNMPv2-SMI::enterprises.7616.3.3.8.0 = INTEGER: 3400 SNMPv2-SMI::enterprises.7616.3.4.1.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.2.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.3.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.4.0 = INTEGER: 220 SNMPv2-SMI::enterprises.7616.3.4.5.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.6.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.7.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.8.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.9.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.4.10.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.7.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.8.0 = INTEGER: 0 End of MIB
On 19.01.17 12:27, chott@praha1.net wrote:
MIB attached for LAN Controller
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook
http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* chott@praha1.net *Odesláno:* 18. ledna 2017 17:29 *Komu:* Observium Network Observation System *Předmět:* RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
email-header-praha1
*Tomas Chott technický ředitel***
chott@praha1.net mailto:chott@praha1.net* *Phone:*+420 245 004 005 *Mobile:*+420 733 123 135***
*Metropolitní síť Praha 1 z.s.p.o.* Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.net http://www.praha1.net
Popis: Facebook
http://www.facebook.com/praha1nethttp://www.linkedin.com/pub/tomas-chott/49/97a/1aa
*Od:* observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] *Odesláno:* 15. ledna 2017 22:54 *Komu:* observium@observium.org *Předmět:* [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB
https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0:
READWRITE
ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY
OCTET_STRING.
#define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY
ASCII_STRING.
#define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY
ASCII_STRING.
#define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY
ASCII_STRING.
#define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY
ASCII_STRING.
#define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY
ASCII_STRING.
#define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY
ASCII_STRING.
#define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY
ASCII_STRING.
#define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY
ASCII_STRING.
#define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY
ASCII_STRING.
#define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY
ASCII_STRING.
#define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY
ASCII_STRING.
#define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY
ASCII_STRING.
#define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY
ASCII_STRING.
#define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY
ASCII_STRING.
#define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY
ASCII_STRING.
#define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY
ASCII_STRING.
#define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD
O
N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SN
-- Mike Stupalov http://observium.org
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Hello Adam and Mike
for example
LAN-MODULE::out0.0 = INTEGER: OFF(1) = Field 0=ON/1=OFF LAN-MODULE::out1.0 = INTEGER: OFF(1) = Field 0=ON/1=OFF LAN-MODULE::out2.0 = INTEGER: OFF(1) = Field 0=ON/1=OFF LAN-MODULE::out3.0 = INTEGER: OFF(1) = Field 0=ON/1=OFF LAN-MODULE::out4.0 = INTEGER: OFF(1) = Field 0=ON/1=OFF LAN-MODULE::out5.0 = INTEGER: ON(0) = Field 0=ON/1=OFF LAN-MODULE::outall.0 = Wrong Type (should be INTEGER): NULL LAN-MODULE::temp.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 = 21,9 °Celsius LAN-MODULE::vcc.0 = Wrong Type (should be OCTET STRING): INTEGER: 122 = 12,2 V
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele Adam Armstrong [adama@memetic.org] Odesláno: 23. ledna 2017 13:08 Komu: Observium Network Observation System Předmět: Re: [Observium] MIB Sensorgateway
Someone email this vendor and demand non-retarded firware and mibs.
God.
Adam.
Sent from BlueMailhttp://www.bluemail.me/r On 23 Jan 2017, at 11:37, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi Tomas and Alessandro and other,
I tested output for which you have given me access.
everything is bad :) there is no way to understand exactly what kind of sensors. the data do not correspond to MIBs..
FW3 walk: RFC1213-MIB::sysDescr.0 = STRING: "3.13" RFC1213-MIB::sysObjectID.0 = OID: LAN-MODULE::lan-module RFC1213-MIB::sysUpTime.0 = Timeticks: (145433837) 16 days, 19:58:58.37 RFC1213-MIB::sysContact.0 = STRING: "LAN_SWITCH-HOME" LAN-MODULE::trapReceiverNumber.1 = INTEGER: 1 LAN-MODULE::trapEnabled.1 = INTEGER: No(0) LAN-MODULE::trapReceiverIPAddress.1 = IpAddress: 10.58.252.2 LAN-MODULE::trapCommunity.1 = Hex-STRING: 00 LAN-MODULE::out0.0 = INTEGER: OFF(1) LAN-MODULE::out1.0 = INTEGER: OFF(1) LAN-MODULE::out2.0 = INTEGER: OFF(1) LAN-MODULE::out3.0 = INTEGER: OFF(1) LAN-MODULE::out4.0 = INTEGER: OFF(1) LAN-MODULE::out5.0 = INTEGER: ON(0) LAN-MODULE::outall.0 = Wrong Type (should be INTEGER): NULL LAN-MODULE::temp.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::vcc.0 = Wrong Type (should be OCTET STRING): INTEGER: 122 LAN-MODULE::inp1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp2.0 = Wrong Type (should be OCTET STRING): INTEGER: 3 LAN-MODULE::inp3.0 = Wrong Type (should be OCTET STRING): INTEGER: 4326 LAN-MODULE::inp4.0 = Wrong Type (should be OCTET STRING): INTEGER: 575 LAN-MODULE::inp5.0 = Wrong Type (should be OCTET STRING): INTEGER: 25 LAN-MODULE::inp6.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::inp7.0 = Wrong Type (should be OCTET STRING): INTEGER: 215 LAN-MODULE::inp8.0 = Wrong Type (should be OCTET STRING): INTEGER: 236 LAN-MODULE::inp9.0 = Wrong Type (should be OCTET STRING): INTEGER: 231 LAN-MODULE::inp10.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::inp11.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::DTH22-1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::DTH22-2.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::esense.3.0 = INTEGER: 0 LAN-MODULE::i3xi5.0 = Wrong Type (should be OCTET STRING): INTEGER: 14550 LAN-MODULE::Pxt.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D-24H.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp1Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp2Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp3Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp4Digital.0 = INTEGER: HIGH(1) End of MIB
For Alessandro, your device used complete other oid tree, for which I not have any MIBs: .1.3.6.1.4.1.7616:
SNMPv2-SMI::enterprises.7616.3.1.0.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.6.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.7.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.8.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.9.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.1.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.2.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.3.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.4.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.3.1.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.2.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.3.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.4.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.7.0 = INTEGER: 2495 SNMPv2-SMI::enterprises.7616.3.3.8.0 = INTEGER: 3400 SNMPv2-SMI::enterprises.7616.3.4.1.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.2.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.3.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.4.0 = INTEGER: 220 SNMPv2-SMI::enterprises.7616.3.4.5.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.6.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.7.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.8.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.9.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.4.10.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.7.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.8.0 = INTEGER: 0 End of MIB
On 19.01.17 12:27, chott@praha1.netmailto:chott@praha1.net wrote: MIB attached for LAN Controller
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.netmailto:chott@praha1.net Odesláno: 18. ledna 2017 17:29 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.orgmailto:observium-bounces@observium.org] za uživatele chott@praha1.netmailto:chott@praha1.net [chott@praha1.netmailto:chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.orgmailto:observium@observium.org Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SN
-- Mike Stupalov http://observium.org
________________________________
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium
Will do that on next shipment…. MIB’s is not the only thing they fuck up. Something simple as HTTPS is an issue for them.
But hey, like the product so I can live with the retarded shit ☺
Met vriendelijke groet,
David
Van: observium [mailto:observium-bounces@observium.org] Namens Adam Armstrong Verzonden: maandag 23 januari 2017 13:09 Aan: Observium Network Observation System observium@observium.org Onderwerp: Re: [Observium] MIB Sensorgateway
Someone email this vendor and demand non-retarded firware and mibs. God. Adam. Sent from BlueMailhttp://www.bluemail.me/r On 23 Jan 2017, at 11:37, Mike Stupalov <mike@observium.orgmailto:mike@observium.org> wrote: Hi Tomas and Alessandro and other,
I tested output for which you have given me access.
everything is bad :) there is no way to understand exactly what kind of sensors. the data do not correspond to MIBs..
FW3 walk: RFC1213-MIB::sysDescr.0 = STRING: "3.13" RFC1213-MIB::sysObjectID.0 = OID: LAN-MODULE::lan-module RFC1213-MIB::sysUpTime.0 = Timeticks: (145433837) 16 days, 19:58:58.37 RFC1213-MIB::sysContact.0 = STRING: "LAN_SWITCH-HOME" LAN-MODULE::trapReceiverNumber.1 = INTEGER: 1 LAN-MODULE::trapEnabled.1 = INTEGER: No(0) LAN-MODULE::trapReceiverIPAddress.1 = IpAddress: 10.58.252.2 LAN-MODULE::trapCommunity.1 = Hex-STRING: 00 LAN-MODULE::out0.0 = INTEGER: OFF(1) LAN-MODULE::out1.0 = INTEGER: OFF(1) LAN-MODULE::out2.0 = INTEGER: OFF(1) LAN-MODULE::out3.0 = INTEGER: OFF(1) LAN-MODULE::out4.0 = INTEGER: OFF(1) LAN-MODULE::out5.0 = INTEGER: ON(0) LAN-MODULE::outall.0 = Wrong Type (should be INTEGER): NULL LAN-MODULE::temp.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::vcc.0 = Wrong Type (should be OCTET STRING): INTEGER: 122 LAN-MODULE::inp1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp2.0 = Wrong Type (should be OCTET STRING): INTEGER: 3 LAN-MODULE::inp3.0 = Wrong Type (should be OCTET STRING): INTEGER: 4326 LAN-MODULE::inp4.0 = Wrong Type (should be OCTET STRING): INTEGER: 575 LAN-MODULE::inp5.0 = Wrong Type (should be OCTET STRING): INTEGER: 25 LAN-MODULE::inp6.0 = Wrong Type (should be OCTET STRING): INTEGER: 219 LAN-MODULE::inp7.0 = Wrong Type (should be OCTET STRING): INTEGER: 215 LAN-MODULE::inp8.0 = Wrong Type (should be OCTET STRING): INTEGER: 236 LAN-MODULE::inp9.0 = Wrong Type (should be OCTET STRING): INTEGER: 231 LAN-MODULE::inp10.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::inp11.0 = Wrong Type (should be OCTET STRING): INTEGER: -600 LAN-MODULE::DTH22-1.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::DTH22-2.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::esense.3.0 = INTEGER: 0 LAN-MODULE::i3xi5.0 = Wrong Type (should be OCTET STRING): INTEGER: 14550 LAN-MODULE::Pxt.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::Pinp4D-24H.0 = Wrong Type (should be OCTET STRING): INTEGER: 0 LAN-MODULE::inp1Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp2Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp3Digital.0 = INTEGER: HIGH(1) LAN-MODULE::inp4Digital.0 = INTEGER: HIGH(1) End of MIB
For Alessandro, your device used complete other oid tree, for which I not have any MIBs: .1.3.6.1.4.1.7616:
SNMPv2-SMI::enterprises.7616.3.1.0.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.1.6.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.7.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.8.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.1.9.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.1.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.2.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.3.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.2.4.0 = INTEGER: 1 SNMPv2-SMI::enterprises.7616.3.3.1.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.2.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.3.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.4.0 = INTEGER: 2 SNMPv2-SMI::enterprises.7616.3.3.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.3.7.0 = INTEGER: 2495 SNMPv2-SMI::enterprises.7616.3.3.8.0 = INTEGER: 3400 SNMPv2-SMI::enterprises.7616.3.4.1.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.2.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.3.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.4.0 = INTEGER: 220 SNMPv2-SMI::enterprises.7616.3.4.5.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.6.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.7.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.8.0 = INTEGER: -600 SNMPv2-SMI::enterprises.7616.3.4.9.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.4.10.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.1.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.2.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.3.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.4.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.5.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.6.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.7.0 = INTEGER: 0 SNMPv2-SMI::enterprises.7616.3.5.8.0 = INTEGER: 0 End of MIB
On 19.01.17 12:27, chott@praha1.netmailto:chott@praha1.net wrote: MIB attached for LAN Controller
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net http://www.facebook.com/praha1net
http://www.facebook.com/praha1net ________________________________ Od: chott@praha1.net Odesláno: 18. ledna 2017 17:29 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgatewayhttp://www.facebook.com/praha1net It is possible add support for LAN Controller? http://www.facebook.com/praha1net http://www.facebook.com/praha1net Tomhttp://www.facebook.com/praha1net http://www.facebook.com/praha1net http://www.facebook.com/praha1net http://www.facebook.com/praha1net
Tomas Chott technický ředitelhttp://www.facebook.com/praha1net chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135http://www.facebook.com/praha1net
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.facebook.com/praha1net http://www.facebook.com/praha1net
http://www.facebook.com/praha1net ________________________________ Od: observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.org Předmět: [Observium] MIB Sensorgatewayhttp://www.facebook.com/praha1net Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
http://www.facebook.com/praha1net http://www.facebook.com/praha1net #define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS.http://www.facebook.com/praha1net #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING.http://www.facebook.com/praha1net #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE.http://www.facebook.com/praha1net #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE.http://www.facebook.com/praha1net #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS.http://www.facebook.com/praha1net #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING.http://www.facebook.com/praha1net #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE.http://www.facebook.com/praha1net #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE.http://www.facebook.com/praha1net #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE.http://www.facebook.com/praha1net #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE.http://www.facebook.com/praha1net #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE.http://www.facebook.com/praha1net #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING.http://www.facebook.com/praha1net #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING.http://www.facebook.com/praha1net #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E .http://www.facebook.com/praha1net #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE.http://www.facebook.com/praha1net #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE.http://www.facebook.com/praha1net #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE.http://www.facebook.com/praha1net NUMBERS OID for SNhttp://www.facebook.com/praha1net http://www.facebook.com/praha1net
http://www.facebook.com/praha1net
http://www.facebook.com/praha1net
-- http://www.facebook.com/praha1net
Mike Stupalovhttp://www.facebook.com/praha1net
http://observium.orghttp://www.facebook.com/praha1net
http://www.facebook.com/praha1net ________________________________
observium mailing list observium@observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observiumhttp://www.facebook.com/praha1net
Disclaimer ( http://www.avans.nl/over-avans/e-mail-disclaimer )
What about this MIB
attached file
by MIB browser, coresponding with real field from SNMP WALK
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.net Odesláno: 19. ledna 2017 10:27 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgateway
MIB attached for LAN Controller
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: chott@praha1.net Odesláno: 18. ledna 2017 17:29 Komu: Observium Network Observation System Předmět: RE: MIB Sensorgateway
It is possible add support for LAN Controller?
Tom
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
________________________________ Od: observium [observium-bounces@observium.org] za uživatele chott@praha1.net [chott@praha1.net] Odesláno: 15. ledna 2017 22:54 Komu: observium@observium.org Předmět: [Observium] MIB Sensorgateway
Hello team
we have lot of device LAN Controllertr http://www.tinycontrol.pl/tinycontrol/en/lan/lan_kontroler.php
in this case there is old MIB https://github.com/pgmillon/observium/blob/master/mibs/SENSORGATEWAY-MIB.mib
Probably coresponding with OIDs down, is it possible add support for this LAN Controller?
Tom
#define SYS_DESCR (99) // iso.3.6.1.2.1.1.1.0: READONLY ASCII_STRING. #define SYS_UP_TIME (97) // iso.3.6.1.2.1.1.3.0: READONLY TIME_TICKS. #define SYS_NAME (98) // iso.3.6.1.2.1.1.4.0: READWRITE ASCII_STRING. #define TRAP_RECEIVER_ID (1) // iso.3.6.1.4.1.17095.2.1.1.1.0: READWRITE BYTE. #define TRAP_RECEIVER_ENABLED (2) // iso.3.6.1.4.1.17095.2.1.1.2.0: READWRITE BYTE. #define TRAP_RECEIVER_IP (3) // iso.3.6.1.4.1.17095.2.1.1.3.0: READWRITE IP_ADDRESS. #define TRAP_COMMUNITY (4) // iso.3.6.1.4.1.17095.2.1.1.4.0: READWRITE ASCII_STRING. #define OUT0 (5) // iso.3.6.1.4.1.17095.3.1.0: READWRITE BYTE. #define OUT1 (6) // iso.3.6.1.4.1.17095.3.2.0: READWRITE BYTE. #define OUT2 (7) // iso.3.6.1.4.1.17095.3.3.0: READWRITE BYTE. #define OUT3 (8) // iso.3.6.1.4.1.17095.3.4.0: READWRITE BYTE. #define OUT4 (9) // iso.3.6.1.4.1.17095.3.5.0: READWRITE BYTE. #define ALL (90) // iso.3.6.1.4.1.17095.3.100.0: READONLY OCTET_STRING. #define TEMP (10) // iso.3.6.1.4.1.17095.4.1.0: READONLY ASCII_STRING. #define VCC (11) // iso.3.6.1.4.1.17095.4.2.0: READONLY ASCII_STRING. #define INP1 (12) // iso.3.6.1.4.1.17095.4.3.0: READONLY ASCII_STRING. #define INP2 (13) // iso.3.6.1.4.1.17095.4.4.0: READONLY ASCII_STRING. #define INP3 (14) // iso.3.6.1.4.1.17095.4.5.0: READONLY ASCII_STRING. #define INP4 (15) // iso.3.6.1.4.1.17095.4.6.0: READONLY ASCII_STRING. #define INP5 (16) // iso.3.6.1.4.1.17095.4.7.0: READONLY ASCII_STRING. #define INP6 (17) // iso.3.6.1.4.1.17095.5.1.0: READONLY ASCII_STRING. #define INP7 (18) // iso.3.6.1.4.1.17095.5.2.0: READONLY ASCII_STRING. #define INP8 (19) // iso.3.6.1.4.1.17095.5.3.0: READONLY ASCII_STRING. #define INP9 (20) // iso.3.6.1.4.1.17095.5.4.0: READONLY ASCII_STRING. #define INP10 (21) // iso.3.6.1.4.1.17095.5.5.0: READONLY ASCII_STRING. #define INP11 (22) // iso.3.6.1.4.1.17095.5.6.0: READONLY ASCII_STRING. #define DTH22_1 (23) // iso.3.6.1.4.1.17095.6.1.0: READONLY ASCII_STRING. #define DTH22_2 (24) // iso.3.6.1.4.1.17095.6.2.0: READONLY ASCII_STRING. #define I3XI5 (30) // iso.3.6.1.4.1.17095.7.1.0: READONLY ASCII_STRING. #define PXT (31) // iso.3.6.1.4.1.17095.7.2.0: READONLY ASCII_STRING. #define PINP4D (32) // iso.3.6.1.4.1.17095.7.3.0: READONLY ASCII_STRING. #define PINP4D_24H (33) // iso.3.6.1.4.1.17095.7.4.0: READONLY ASCII_STRING. #d e fin e I N P1D (41) // is o. 3. 6 .1.4.1.170 95.10.1. 0 : R E AD O N LY BY T E . #define INP2D (42) // iso.3.6.1.4.1.17095.10.2.0: READONLY BYTE. #define INP3D (43) // iso.3.6.1.4.1.17095.10.3.0: READONLY BYTE. #define INP4D (44) // iso.3.6.1.4.1.17095.10.4.0: READONLY BYTE. NUMBERS OID for SNMP
[email-header-praha1]
Tomas Chott technický ředitel chott@praha1.netmailto:chott@praha1.net Phone: +420 245 004 005 Mobile: +420 733 123 135
Metropolitní síť Praha 1 z.s.p.o. Jindrisska 18 110 00 Praha 1 Czech Republic www.praha1.nethttp://www.praha1.net [Popis: Facebook]http://www.facebook.com/praha1net http://www.linkedin.com/pub/tomas-chott/49/97a/1aa
participants (5)
-
Adam Armstrong -
Alessandro Galardini -
chott＠praha1.net -
David Schrok -
Mike Stupalov