March 2026 - observium - lists.observium.org

casa 100G "logical-channel 0 description"
by Sébastien Gay 09 Mar '26

09 Mar '26

Hello, Can you add the interface description? « interface upstream 13/14.2 description "Fy-15 Petit-Pont 3 45" frequency 45000000 channel-width 6400000 power-level 6 ingress-cancellation logical-channel 0 description "Fy-15 Petit-Pont 3 45" « ALERT Modify <https://observiumm.sinergy.ch:8078/device/device=200/tab=alert/alert_entry= 56152/> Alert Alarme SNR Alert Entity Logical Upstream Channel 13/14.2/0 DS SNR <https://observiumm.sinergy.ch:8078/device/device=200/tab=health/metric=snr/ id=3949/> Conditions sensor_value less 25 (20.2) Metrics sensor_value = 20.2 Duration 7m 2s (09-03-2026 17:10:07) Device Device 1.1.1.1 (Casa 02 Village Externe) Hardware Operating System CASA DCTS Thanks in advance, Adam Sébastien

1 0

Inquiry regarding HA deployment with 2 Observium server
by Ashraf Alkheroo 03 Mar '26

03 Mar '26

We are currently planning a deployment involving two Observium servers and would appreciate clarification regarding the appropriate edition and recommended architecture. Our objective is to implement a high-availability (HA) setup with the following requirements: * Two Observium servers operating together. * If a device is added for monitoring on one server, it should automatically appear on the other server. * The database should be synchronized between the two servers. * The overall solution should provide redundancy and ensure service continuity if one server fails. Could you please confirm: * Which Observium edition supports this type of multi-server / HA deployment? * Whether native database synchronization between two servers is supported. * Any recommended architecture or best practices for achieving full HA with shared data consistency. We would appreciate your guidance in selecting the correct version and architecture for our needs. Kind regards, Ashraf ALkheroo Network and System administrator [cid:image001.png@01DCAA45.A0FD6A60] Support : +41 (0)21 544 29 29 Internet * VoIP * Network * Hosting Consulting * IT Management

2 1

device showing connection to switch
by Ivo van Tulden 02 Mar '26

02 Mar '26

Dear sir/mem, Within Observium there is a nice 'network map' view which shows al the network devices. Is there a view to show the connection from a device in this netwerk map view? A view that shows the connections to the network-switch it is connected? Met vriendelijke groet, Ivo van Tulden Industrial Automation [cid:47aed2b0-0052-4ebb-9aba-849cae761954] **** DISCLAIMER: The information sent in or attached to this e-mail is for the addressee only. If this e-mail message is unclear please contact VLISCO by e-mail or telephone. Disclosure or reproduction of this information to a third party without prior agreement of VLISCO is not allowed. VLISCO does not accept any responsibility for the correct and complete interpretation of this e-mail nor for the time of its arrival. VLISCO cannot be held responsible for any claim resulting from negotiations and/or decisions made directly or indirectly based on information contained in this e-mail message. Vlisco Netherlands B.V. Binnen Parallelweg 27, 5701 PH, Helmond, The Netherlands. Chamber of commerce Eindhoven 50751492. Tel.: +31 (0)492 570922 Fax: +31 (0)492 570230 Visit our website: www.vlisco.com ****

3 4

Inquiry regarding HA deployment with 2 Observium servers
by Ashraf Alkheroo 02 Mar '26

02 Mar '26

Dear Observium Support Team, We are currently planning a deployment involving two Observium servers and would appreciate clarification regarding the appropriate edition and recommended architecture. Our objective is to implement a high-availability (HA) setup with the following requirements: * Two Observium servers operating together. * If a device is added for monitoring on one server, it should automatically appear on the other server. * The database should be synchronized between the two servers. * The overall solution should provide redundancy and ensure service continuity if one server fails. Could you please confirm: * Which Observium edition supports this type of multi-server / HA deployment? * Whether native database synchronization between two servers is supported. * Any recommended architecture or best practices for achieving full HA with shared data consistency. We would appreciate your guidance in selecting the correct version and architecture for our needs. Kind regards, Ashraf ALkheroo Network and System administrator [cid:image001.png@01DCAA36.32443900] Support : +41 (0)21 544 29 29 Internet * VoIP * Network * Hosting Consulting * IT Management

1 0