- observium - lists.observium.org

Discards reporting incorectly
by Andy Lemin 27 May '16

27 May '16

Hi, We have noticed an interesting problem where on all of our OpenBSD firewalls, every single interface on the same firewall reports the same discards rate. We would like to try and work out which interface these discards are actually happening on, so we can work out what the cause is and check for a possible remedy (wrong VLANs being trunked through for example). If they are bad checksums, than that's ok. But would like to know ;) Below is a screenshot showing the "Errors" graphs for all ports on the same server, notice how they are all displaying the same data. My thoughts of how to start are; What is the SNMP OID being polled for this information? I wonder if OpenBSD is incorrectly reporting the same value on all interfaces, or if there is only a single Discards counter/OID for the whole system, or if it is an Observium problem etc.. So if anyone can tell me the OID, I can do some more investigation first ;) I don't mind setting up OID mappings in SNMPD etc, if that is required I would be happy to provide a configuration template for Observium and OpenBSD. And I also wonder how up to date the OpenBSD MIB file built into Observium is? Thanks in advance for your help :) Kind regards, Andy.

4 8

can't resolve host, but I can ping it
by Dev 26 May '16

26 May '16

./add_device.php 1.2.3.4 catalyst v1 fails with Try to add 1.2.3.4: Could not resolve 1.2.3.4. Devices failed: 1. but ping works fping 1.2.3.4 1.2.3.4. is alive but snmpwalk works like: snmpwalk -v 1 -c catalyst 1.2.3.4 iso.3.6.1.2.1.1.1.0 = STRING: "Cisco IOS Software, Catalyst… ... The web interface add device also fails same way. what am I missing?

2 1

Graph error on ipv6 host
by Anders Alavik 26 May '16

26 May '16

HI! I added 2 new routers direct with ipv6 direct in cli. Every thing works nice exept the aggregated graphs were the 2 new routers are a part. My guess is that its the name’s on the routers thats are the problem. they are just named as the ipv6 address. Med Vänliga Hälsningar Anders Alavik anders(a)bogalnet.se <mailto:anders@bogalnet.se> / 0322 - 64 24 71 BogalNet AB Alvhemsgatan 3 447 30 Vårgårda http://www.bogalnet.se <http://www.bogalnet.se/>

2 1

Re: [Observium] observium Digest, Vol 70, Issue 88
by Gaurav Chaturvedi 26 May '16

26 May '16

Hello Adam, Regret for the delay, kindly find the attached files containing the output of the commnad. ./poller.php -h <device> -m unix-agent,applications -d Regards Gaurav On Fri, May 20, 2016 at 4:30 PM <observium-request(a)observium.org> wrote: > Message: 2 > Date: Thu, 19 May 2016 12:34:09 +0100 > From: Adam Armstrong <adama(a)memetic.org> > To: Observium Network Observation System <observium(a)observium.org> > Cc: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] Help needed with unix-agent > Message-ID: <9c7c1b52-f513-4f8d-8720-82d898fc3b47(a)typeapp.com> > Content-Type: text/plain; charset="utf-8" > > ./poller.php -h <device> -m unix-agent,applications -d > > Adam. > > Sent from BlueMail > >

1 0

Missing BGP Peers
by Duncan Mossop 25 May '16

25 May '16

Afternoon, Before I open a ticket with JTAC, I have a Juniper MX router that currently displays no BGP peer data (it used to once upon a time). I ran ./poller.php -h <device_id> -m bgp-peers –d against it and got the attached output. I also get the below every day or so: [cid:image001.png@01D1B683.F2B58B50] I could be wrong but from that log file it looks like the snmpwalk is returning data from the device? Could someone run their eyes over the log and see if they agree and if so where do I need to look next in order to resolve this issue? Thanks, Duncan Mossop • Operations Manager, SystemHOST Ltd ________________________________ dmossop(a)systemhost.co.uk [cid:imagee10b23.PNG@cbb8f5da.4085b26d] 01524 737414 systemhost.co.uk<http://www.systemhost.co.uk> [Twitter]<https://twitter.com/systemhost> Follow us on Twitter ________________________________ SystemHOST Ltd Registered office: Holmere Hall, Yealand Conyers, Carnforth, Lancs, LA5 9SN Registered in England No.05028996 VAT No. 927386490 This e-mail and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. By opening this email or its attachments, you accept liability for any damage that may be caused to your computer hardware, software or data. ________________________________

3 9

Alert Checker options
by Lyndon Labuschagne 25 May '16

25 May '16

Hi All Is there a way of removing a subset of device names from the alert checker configs, i.e. !somename.* * or NOT EQUAL somename.* * or similar so if there are devices that I want to graph, but dont care if they are up or down. Which brings me to another point I guess, is there a way of not showing certain things on the dashboard or diminishing the value / time of a notified device, I dont need to know about a rebooted device for 24 hours, also is there are 2 or 3 errors on an interface I may not need to know about them, and as per above I may only want to graph traffic on a device if it is up, and dont need to know if it isnt up

2 6

Disable re-alert interval
by Gumilar Siegfried 25 May '16

25 May '16

Hello, Observium re-alerts on a configurable interval with the "$config['alerts']['interval']" setting. We don't want any re-alerts. Is there a way to disable the re-alerts entirely? Setting it to 0 would be a good idea to implement this. Regards, Siegfried

1 0

Missing module "LM-SENSORS-MIB"
by kontakt＠leonkrieg.de 24 May '16

24 May '16

Since we've upgraded to Observium Professional 0.16.5.7872, we are getting an error about a missing MIB file every 30 minutes: > MIB search path: /opt/observium/mibs > Cannot find module (LM-SENSORS-MIB): At line 0 in (none) It seems like older versions of Observium have this file but the latest one hasn't. How should we go about fixing this error? Sincerely, Leon

2 2

Error Adding Device
by Mohd Zainal Abidin Rabani 24 May '16

24 May '16

Hi, Getting this error: observium@observium-desktop:/opt/observium$ ./add_device.php -d 10.2.30.2 N0c53rd0tn3t v2c DEBUG! SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'dbSchema';] SQL RUNTIME[0.00069404s] SQL[SELECT `attrib_value` FROM `observium_attribs` WHERE `attrib_type` = 'current_rev';] SQL RUNTIME[0.00053310s] SQL[SELECT * FROM `config`] SQL RUNTIME[0.00061989s] CMD[/bin/hostname -f] EXITCODE[0] CMD RUNTIME[0.0076s] STDOUT[ observium-desktop ] Observium CE 0.16.1.7533 Add Device(s) CMD[/opt/observium/scripts/distro] EXITCODE[0] CMD RUNTIME[0.38s] STDOUT[ Linux|4.4.0-21-generic|amd64|Ubuntu|16.04 ] CMD[/usr/bin/env python --version 2>&1] EXITCODE[0] CMD RUNTIME[0.0565s] STDOUT[ Python 2.7.11+ ] SQL[SELECT version();] SQL RUNTIME[0.00033402s] CMD[/usr/bin/snmpget --version 2>&1] EXITCODE[0] CMD RUNTIME[0.1467s] STDOUT[ NET-SNMP version: 5.7.3 ] CMD[/usr/bin/rrdtool --version |head -n1] EXITCODE[0] CMD RUNTIME[0.2724s] STDOUT[ RRDtool 1.5.5 Copyright by Tobias Oetiker <tobi(a)oetiker.ch> ] SQL[SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP);] SQL RUNTIME[0.02811098s] CMD[/usr/bin/env apache2 -v | awk '/Server version:/ {print $3}'] EXITCODE[0] CMD RUNTIME[0.1172s] STDOUT[ Apache/2.4.18 ] SQL[SELECT @@sql_mode;] SQL RUNTIME[0.02187586s] SQL[SHOW VARIABLES LIKE 'character_set_connection'] SQL RUNTIME[0.02842999s] ##### Software versions ##### o OS Linux 4.4.0-21-generic [amd64] (Ubuntu 16.04) o Apache 2.4.18 o PHP 7.0.4-7ubuntu2 o Python 2.7.11+ o MySQL 5.7.12-0ubuntu1 (extension: mysqli 5.0.12-dev) o SNMP NET-SNMP 5.7.3 o RRDtool 1.5.5 ##### MySQL mode ##### o MySQL ONLY_FULL_GROUP_BY,STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FO R_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION ##### Charset info ##### o PHP UTF-8 o MySQL utf8 ##### Timezones info ##### o Date Tuesday, 24-May-16 09:55:39 MYT o PHP +08:00 o MySQL +08:00 Try to add 10.2.30.2: SQL[SELECT COUNT(*) FROM `devices` WHERE `hostname` = '10.2.30.2'] SQL RUNTIME[0.00078392s] Could not resolve 10.2.30.2. Devices failed: 1. USAGE: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] add_device.php <hostname> [any|nanp|anp|ap] [v3] [user] [password] [enckey] [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] add_device.php <filename> EXAMPLE: SNMPv1/2c: add_device.php <hostname> [community] [v1|v2c] [port] [udp|udp6|tcp|tcp6] SNMPv3 : Defaults : add_device.php <hostname> any v3 [user] [port] [udp|udp6|tcp|tcp6] No Auth, No Priv : add_device.php <hostname> nanp v3 [user] [port] [udp|udp6|tcp|tcp6] Auth, No Priv : add_device.php <hostname> anp v3 <user> <password> [md5|sha] [port] [udp|udp6|tcp|tcp6] Auth, Priv : add_device.php <hostname> ap v3 <user> <password> <enckey> [md5|sha] [aes|des] [port] [udp|udp6|tcp|tcp6] FILE : add_device.php <filename> ADD FROM FILE: To add multiple devices, create a file in which each line contains one device with or without options. Format for device options, the same as specified in USAGE. OPTIONS: -p Skip icmp echo checks, device added only by SNMP checks DEBUGGING OPTIONS: -d Enable debugging output. -dd More verbose debugging output. -t Do not add device(s), only test auth options. Need advice please. Regards, Mohd Zainal Abidin Rabani Technical Support

4 4

Monitor by Port
by Mohd Zainal Abidin Rabani 24 May '16

24 May '16

Hi, Is it possible to monitor bandwidth on each port? The document not so complete. Regards, Mohd Zainal Abidin Rabani Technical Support

1 0