- observium - lists.observium.org

"No devices found" shown on Devices pages
by Stuart Shelton 09 Sep '13

09 Sep '13

Many of the pages beneath the "Devices" menu incorrectly display "No devices found". For example, choosing "All Devices" lists two devices, but clicking any of the controls in the '<div class="well">' segment - even the "Detail" button which is active by default - no longer shows the two devices but again reverts to "No devices found". Further down the "Devices" menu, "Servers (2)" is shown, but choosing this also displays "No devices found". Other menus, such as "Ports", appear to display all of their data correctly. This occurs with both SVN-3763 and the latest SVN-4451. When I spoke to another Observium user, they had the same issue, but no solution. Has anyone else seen this problem, or can anyone suggest anything I might do to resolve the issue? Many thanks, Stuart

2 1

Automated CSV/XCL/etc Traffic Billing Report?
by Luis Quintana 07 Sep '13

07 Sep '13

I was looking at the Traffic Billing piece and was curious to know if there is a way to setup an automated monthly report for each individual "customer" that is listed under that area? I dont seem to find anything at the moment. Would be cool to automate that and shoot out the raw data, in addition to the graphs for each individual "customer" on a monthly basis to whatever email address(s) specified. Would that ever be a feature or does anyone know how it could be accomplished?

3 4

Traffic Bill
by Maximilian Jacobsen 06 Sep '13

06 Sep '13

Hi, thanks for the development of observium! I want to use Observium to calculate the traffic of my clients. Now I have the following problem: Under "used" always "0B" is displayed. The same goes for "Over Usage" where only "-" is displayed. In the bar where the traffic usage should be displayed in percent is nothing. In the observium main directory I have found the file poll- billing.php I run it, but unfortunately nothing has happened here. I would be very grateful for a little assistance. For your information: Observium 0.13.9.4451 -- Mit freundlichen Grüßen Maximilian Jacobsen

2 1

False service down alerts
by Wijdan Mohamed 05 Sep '13

05 Sep '13

Hi, I get in the overview page false alarms that my ssh service is down since 43y 258d 19h 50m 43s, while its up and running. I get the same messages for http and smtp services in random hosts. Any idea how can I stop them? Thanks, Wijdan Mohamed Eltayeb Senior Infrastructure Engineer Infrastructure Department Tel: +249(0)183 740 840 Mob: +249(0)91 216 7725 Fax: +249-183-790864 Central Bank of Sudan Khartoum Branch Building-4th floor Osman Digna Street P.O.Box 12595- Khartoum - Sudan <http://www.ebs-sd.com/> www.ebs-sd.com P Please consider the environment before printing this email.

2 1

is_file() usage for rrd file existance
by Peter Childs 05 Sep '13

05 Sep '13

Gday folks. I'm fiddling around with remote RRD storage via rrdcached. Most of the rrdtool stuff is wrapped in includes/rrdtool.inc.php which is wonderful from this perspective. Not within this include is the usage of is_file() to determine the existence of an rrd file. In discovery the pattern is something like If( ! is_file( some.rrd ) ) { rrdtool_create ( … )} In graphing the pattern is something like If ( is_file( some.rrd ) { graph some stuff… } Would there be any support for moving this usage into a rrdtool_file_exists( ) thin wrapper for is_file ? This would make it much easier to extended includes/rrdtool.inc.php to support storage of RRD's on remote storage (and potentially distribute over multiple remote storage devices ..) Thoughts? I had a quick check for usage of scandir/readdir to determine all the rrd's in a 'device' directory, but this doesn't seem to be a common pattern. My other evil thought is to use rename_function/override_function to work around this, but it seems very very WRONG. Cheers, Peter

3 8

Re: [Observium] Cisco LWAPP info
by Adam Armstrong 04 Sep '13

04 Sep '13

At the moment we don't really have much specifoc wireless support at all. Adding it involves writing code. Adam. Sturla Þórsson <stullith(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

Re: [Observium] Switch HP Procurve 3800
by Daniel Fankhauser 04 Sep '13

04 Sep '13

OK, I ran an update from Observium 0.13.9.4449 to Observium v0.13.9.4450 Now 2 hours later, the problem is solved! The device is now recognized as: HP ProCurve KA.15.09.0009 Thank you very much. U made my day. Daniel -----Ursprüngliche Nachricht----- Von: Mike Stupalov [mailto:landy2005@gmail.com] Gesendet: Mittwoch, 4. September 2013 17:33 An: Daniel Fankhauser Betreff: Re: [Observium] Switch HP Procurve 3800 On 04.09.2013 19:17, Daniel Fankhauser wrote: > Hi Mike > > Thanks. I did so (snmpwalk -v2c -Ovqn -c rocommunity ip-address sysObjectID) and the response is: > > Response: .1.3.6.1.4.1.11.2.3.7.8.5.2 Check latest revision (r4450). > > Daniel > > > -----Ursprüngliche Nachricht----- > Von: Mike Stupalov [mailto:landy2005@gmail.com] > Gesendet: Mittwoch, 4. September 2013 17:12 > An: Observium Network Observation System > Cc: Daniel Fankhauser > Betreff: Re: [Observium] Switch HP Procurve 3800 > > On 04.09.2013 19:03, Daniel Fankhauser wrote: >> Hi All >> >> I have a new HP Procurve 3800 switch stack which is recognized as >> "generic device" only. >> >> The device information show as: >> "HP Stack, revision KA.15.09.0009, ROM KA.15.06 >> (/ws/swbuildm/KA_rel_hartford_qaoff/code/build/tam(KA_rel_hartford_qaoff >> )) (Formerly ProCurve)" >> >> Does anyone have an idea how I could fix this? > > show: > snmpwalk -v2c -Ovqn -c <community> <device> sysObjectID > >> >> Thank you >> >> Daniel >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > -- Mike Stupalov

1 0

Cisco LWAPP info
by Sturla Þórsson 04 Sep '13

04 Sep '13

Hi all, I got a Cisco AIR-CT5508-K9 WLC controlling our LWAPP's and I was wondering if there's any way to get info on the LWAPP's in Observium? With kind regards, Sturla Thorsson

1 0

Switch HP Procurve 3800
by Daniel Fankhauser 04 Sep '13

04 Sep '13

Hi All I have a new HP Procurve 3800 switch stack which is recognized as "generic device" only. The device information show as: "HP Stack, revision KA.15.09.0009, ROM KA.15.06 (/ws/swbuildm/KA_rel_hartford_qaoff/code/build/tam(KA_rel_hartford_qaoff )) (Formerly ProCurve)" Does anyone have an idea how I could fix this? Thank you Daniel

2 2

Raritan PDU MIB support
by Glen Whittle 04 Sep '13

04 Sep '13

Would it be possible for MIBS for the Raritan metered PDU's to be added to Observium I have attached the MIBS from the device. Kind Regards, [cid:interactive_logo27dd.jpg]<http://www.interactivesa.co.za/> Glen Whittle | Solutions Architect ________________________________ Tel: +27 31 538 4132 Fax: +27 31 538 4970 Mobile: +27 81 394 2540 | www.interactivesa.co.za<http://www.interactivesa.co.za> [cid:spacer2abd.jpg] [cid:facebook6d63.png]<http://www.facebook.com/BlakeHoldings> [cid:twitter1792.png]<http://www.twitter.com/blake_tweets> [cid:youtube6cb.jpeg]<http://www.youtube.com/watch?v=IcRXpUG6SvU&feature=youtu.be> [cid:map633f.png]<http://www.blake.co.za/contacts/> ________________________________ Disclaimer The information contained in this communication from the sender is confidential. It is intended solely for use by the recipient and others authorized to receive it. If you are not the recipient, you are hereby notified that any disclosure, copying, distribution or taking action in relation of the contents of this information is strictly prohibited and may be unlawful.

2 1