- observium - lists.observium.org

observium.org down?
by Julian Rutz 05 Mar '13

05 Mar '13

Hello, Is observium.org down? It gives me only "Http/1.1 Service Unavailable". Cheers, Julian

1 0

Discovery of large stack causes hardware to become unresponsive
by Patrick Zaloum 05 Mar '13

05 Mar '13

Hello I are testing Observium in a new environment after previous success stories elsewhere. We have noted that when we run device discovery on a stack of 5 Cat3750 (12.2-50-SE1) the "device" becomes unresponsive to any other queries / pings / ssh for approximately 5-6 minutes (during the discovery cycle). Once the discovery is complete, the poller, pings, and other operations return to normal. Note that traffic flow does not appear to be affected across the switch. Total ports on the stack are 278 (no argument that it is a large number of ports to poll from a single device). Regular polling of the device does not appear to have any consequences, it is specific to the discovery module. Does anyone have any insight into this? Thanks Patrick

4 5

Re: [Observium] Graphs stopped working
by Tom Taylor 04 Mar '13

04 Mar '13

It's definitely getting data, but not drawing the graphs. [cid:DC1FB0AD-5669-4C3A-9092-6F2E5B63F45F@mill-ny.com] On Feb 20, 2013, at 2:23 PM, Tom Taylor <taylor(a)themill.com<mailto:taylor@themill.com>> wrote: That worked fine, got results out of it: | 109add5bb619 | 16|16 (16|16) | learned 1 | 10bf48777e67 | 37|37 (37|37) | learned 1 | 1803732a0dba | A1|49 (49|49) | learned 1 | 18037340b783 | A1|49 (49|49) | learned It popped them into the DB SQL[INSERT INTO `vlans_fdb` (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES ('1','1','8','00e081df7140','learned')] + And nope, no SELINUX I'm stumped. On Feb 20, 2013, at 12:38 PM, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: run the poller on a single host with debugging enabled : ./poller.php -h <host> -d Did your selinux enable itself? adam. On Wed, 20 Feb 2013 18:01:15 +0000, Tom Taylor <taylor(a)themill.com<mailto:taylor@themill.com>> wrote: Hi there, I was wondering if anyone's got an idea as to why graphs would suddenly stop working? (see attachment) I hadn't updated anything or changed anything, the rrd's all have data in. It's running off Centos 6.2 Any ideas on how to troubleshoot? [cid:18152FC1-6ED1-47C0-8A4D-DC5CBEF4B7BF@mill-ny.com<mailto:DC5CBEF4B7BF@mill-ny.com>] _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 6

Re: [Observium] Discovery of large stack causes hardware to become unresponsive
by Tom Laermans 04 Mar '13

04 Mar '13

Hi Patrick. That's surely not supposed to happen. It's quite a number of ports, but certainly nothing that should be an issue, i poll larger stacks and people poll devices with thousands of interfaces. I would try to check with the -d switch and see which queries lock it up, then report this to cisco as that's simply unacceptable. If you know what causes it and you don't happen to need that info, you could disable that discovery module for those devices. That should help you out while cisco will treat your issue with utmost urgency and does the needful *cough* Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "Patrick Zaloum" <pzaloum(a)gmail.com> To: <observium(a)observium.org> Subject: [Observium] Discovery of large stack causes hardware to become unresponsive Date: Mon, Mar 4, 2013 16:02 HelloI are testing Observium in a new environment after previous success stories elsewhere. We have noted that when we run device discovery on a stack of 5 Cat3750 (12.2-50-SE1) the "device" becomes unresponsive to any other queries / pings / ssh for approximately 5-6 minutes (during the discovery cycle). Once the discovery is complete, the poller, pings, and other operations return to normal. Note that traffic flow does not appear to be affected across the switch. Total ports on the stack are 278 (no argument that it is a large number of ports to poll from a single device). Regular polling of the device does not appear to have any consequences, it is specific to the discovery module. Does anyone have any insight into this? ThanksPatrick

1 0

Re: [Observium] Web UI doesn't show
by Adam Armstrong 04 Mar '13

04 Mar '13

This is lack of mod_rewrite. It is documented in the install guide and in the FAQ. Adam. orznew orznew <orznew(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Re: [Observium] Web UI doesn't show
by Tom Laermans 04 Mar '13

04 Mar '13

Hi, The commad apache2ctl -s (if i recall correctly) shows you all vhost definitions and which file they're defined in. That should help. Sent from my mobile, please excuse brevity and spelling errors. ----- Reply message ----- From: "orznew orznew" <orznew(a)gmail.com> To: "Observium Network Observation System" <observium(a)observium.org> Subject: [Observium] Web UI doesn't show Date: Fri, Mar 1, 2013 08:04 Hi Adam, Thanks a lot. Guess need to dig in a lot more to confirm. On Fri, Mar 1, 2013 at 2:02 PM, Adam Armstrong <adama(a)memetic.org> wrote: I'm not sure. /etc/apache2/htdocs is not a standard path for any Linux distro I know of, so something has been changed. You'll need to work out what that is :) adam. On Fri, 1 Mar 2013 12:26:48 +0800, orznew orznew <orznew(a)gmail.com> wrote: > Hi Adam, > > I'm quite new to Apache2. Can I know if there is any specific file for me > to configure the pointing? > > Thank you. > > On Fri, Mar 1, 2013 at 11:29 AM, Adam Armstrong <adama(a)memetic.org> wrote: > >> >> You have an existing default site configuration which is pointing at >> /etc/apache2/htdocs. >> >> adam. >> >> On Fri, 1 Mar 2013 10:06:54 +0800, orznew orznew <orznew(a)gmail.com> >> wrote: >> > Dear All, >> > >> > I need some help for installing observium in Ubuntu 12.04. I've >> > followed >> > the manual in the website for the installation and everything went >> smooth >> > until I actually want to deploy the web UI. I've managed to add in the >> > device and had paste the code listed in the page to >> > /etc/apache2/sites-available/default. But when I access the website, it >> > shows nothing but error message saying that nothing has been found. >> > I've >> > checked my apache2 error log and it says "File does not exist: >> > /etc/apache2/htdocs". I have another website in the server as well, >> > does >> it >> > have a problem with something else hosted in it? Below is the result I >> get >> > from apache2 -V: >> > apache2 -V >> > Server version: Apache/2.2.22 (Ubuntu) >> > Server built: Nov 8 2012 21:37:36 >> > Server's Module Magic Number: 20051115:30 >> > Server loaded: APR 1.4.6, APR-Util 1.3.12 >> > Compiled using: APR 1.4.6, APR-Util 1.3.12 >> > Architecture: 64-bit >> > Server MPM: ITK >> > threaded: no >> > forked: yes (variable process count) >> > Server compiled with.... >> > -D APACHE_MPM_DIR="server/mpm/experimental/itk" >> > -D APR_HAS_SENDFILE >> > -D APR_HAS_MMAP >> > -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) >> > -D APR_USE_SYSVSEM_SERIALIZE >> > -D APR_USE_PTHREAD_SERIALIZE >> > -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT >> > -D APR_HAS_OTHER_CHILD >> > -D AP_HAVE_RELIABLE_PIPED_LOGS >> > -D DYNAMIC_MODULE_LIMIT=128 >> > -D HTTPD_ROOT="/etc/apache2" >> > -D SUEXEC_BIN="/usr/lib/apache2/suexec" >> > -D DEFAULT_PIDLOG="/var/run/apache2.pid" >> > -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" >> > -D DEFAULT_LOCKFILE="/var/run/apache2/accept.lock" >> > -D DEFAULT_ERRORLOG="logs/error_log" >> > -D AP_TYPES_CONFIG_FILE="mime.types" >> > -D SERVER_CONFIG_FILE="apache2.conf" >> > >> > >> > Any help is very much appreaciated. >> > >> > Thank you. >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1

Re: [Observium] The table 'ports-state' is full
by Adam Armstrong 02 Mar '13

02 Mar '13

You need to increase php memory then :-) With 10k ports its probably running out of memory there too. Adam. Ciro Iriarte <cyruspy(a)gmail.com> wrote: >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 2

The table 'ports-state' is full
by Ciro Iriarte 01 Mar '13

01 Mar '13

Hi!, does anybody recognized this error?, comments?. Regards, -- Ciro Iriarte http://cyruspy.wordpress.com --

2 3

Web UI doesn't show
by orznew orznew 01 Mar '13

01 Mar '13

Dear All, I need some help for installing observium in Ubuntu 12.04. I've followed the manual in the website for the installation and everything went smooth until I actually want to deploy the web UI. I've managed to add in the device and had paste the code listed in the page to /etc/apache2/sites-available/default. But when I access the website, it shows nothing but error message saying that nothing has been found. I've checked my apache2 error log and it says "File does not exist: /etc/apache2/htdocs". I have another website in the server as well, does it have a problem with something else hosted in it? Below is the result I get from apache2 -V: apache2 -V Server version: Apache/2.2.22 (Ubuntu) Server built: Nov 8 2012 21:37:36 Server's Module Magic Number: 20051115:30 Server loaded: APR 1.4.6, APR-Util 1.3.12 Compiled using: APR 1.4.6, APR-Util 1.3.12 Architecture: 64-bit Server MPM: ITK threaded: no forked: yes (variable process count) Server compiled with.... -D APACHE_MPM_DIR="server/mpm/experimental/itk" -D APR_HAS_SENDFILE -D APR_HAS_MMAP -D APR_HAVE_IPV6 (IPv4-mapped addresses enabled) -D APR_USE_SYSVSEM_SERIALIZE -D APR_USE_PTHREAD_SERIALIZE -D SINGLE_LISTEN_UNSERIALIZED_ACCEPT -D APR_HAS_OTHER_CHILD -D AP_HAVE_RELIABLE_PIPED_LOGS -D DYNAMIC_MODULE_LIMIT=128 -D HTTPD_ROOT="/etc/apache2" -D SUEXEC_BIN="/usr/lib/apache2/suexec" -D DEFAULT_PIDLOG="/var/run/apache2.pid" -D DEFAULT_SCOREBOARD="logs/apache_runtime_status" -D DEFAULT_LOCKFILE="/var/run/apache2/accept.lock" -D DEFAULT_ERRORLOG="logs/error_log" -D AP_TYPES_CONFIG_FILE="mime.types" -D SERVER_CONFIG_FILE="apache2.conf" Any help is very much appreaciated. Thank you.

2 4

Hide Device Alerts header
by Maarten De Wispelaere 28 Feb '13

28 Feb '13

Hey, As a cosmetic improvement to the overview page: might be interesting to hide the "device alerts" title & table header, when no such alerts are active ? Nothing critical of course, but seems like an improvement to me ? BTW : new style = LOVE IT :) Thanks for all the good work Regards, Maarten De Wispelaere

1 0