- observium - lists.observium.org

Remove decommissioned poller
by Lars Joergensen 24 Aug '21

24 Aug '21

Hi list We have removed a poller in our partitioned poller setup, but it still appears in the list of selectable pollers for devices. What's the recommended way of removing it? We're not afraid of changes directly in the database. Lars ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 1

Debian 11
by Eric Sigurdsson 23 Aug '21

23 Aug '21

Hello! Does the automated install script works with Debian 11-systems? ES

2 1

Monitor ISP link down.
by Nishanth Abraham 23 Aug '21

23 Aug '21

Hello, The ISP internet link is terminated on a Cisco router/firewall. I would like to monitor the availability of internet service with a ping response from the link public IP. How can achieve this? Thanks, Nishanth

1 0

monitor specific ports
by Luis Olavarrieta 18 Aug '21

18 Aug '21

Hey guys, i am trying to monitor two things in a port, if is operational up with “ ifOperStatus notequals up” but if I set it up to all my switches, it sends 2221 (literally) emails regarding all the ports available in my networks. How can I specify certain ports in certain devices. The other one is to be able to see if there is “traffic”, the scenario is we have a several mikrotik devices connected to DSL modems, but we need to see if the DSL service is up and running and get a notification if this port / service goes down. Regards, Luis

2 1

monitor specific ports
by Luis Olavarrieta 18 Aug '21

18 Aug '21

Hey guys, i am trying to monitor two things in a port, if is operational up with “ ifOperStatus notequals up” but if I set it up to all my switches, it sends 2221 (literally) emails regarding all the ports available in my networks. How can I specify certain ports in certain devices. The other one is to be able to see if there is “traffic”, the scenario is we have a several mikrotik devices connected to DSL modems, but we need to see if the DSL service is up and running and get a notification if this port / service goes down. Regards,

2 1

Panduit Smartzone PDU support request
by Laszlo Nemeth 18 Aug '21

18 Aug '21

Hello, We have a lot of Panduit SmartZone G5 iPDU devices but as i see the Observium not fully supported it. We can see only the basic parameters (uptime, name etc) but not the outlet's usage and another PDU related things. I found the MIB file in the PDU's firmware update: https://www.panduit.com/en/support/download-center/power-distribution-units… and the current version is: G5 PDU Firmware 3.x, the link is: https://www.panduit.com/content/dam/panduit/en/support/download-center-asse… If You need any output from the current PDU device, please drop a mail. Thanks! Br Laszlo

1 0

CO2 Monitoring With Observium?
by Storer, Darren 13 Aug '21

13 Aug '21

Hi, Has anyone got any recommendations for in-building CO2 environmental monitor systems that are already working well with Observium? (long-term stats/alarms etc.) Many thanks Darren

1 1

Monitoring Ping-only devices
by Lars Joergensen 10 Aug '21

10 Aug '21

Hi We're loving Observium and are trying to expand it into our manufacturing network. Problem is, many of the devices located there only support ping. Is there any way to add them to Observium? Best regards Lars Joergensen IT Manager - Network Team - Global IT Chr. Hansen A/S - Boege Alle 10-12 - 2970 Hoersholm - Denmark Phone: +45 52 18 05 22 dklarj(a)chr-hansen.com<mailto:dklarj@chr-hansen.com> - www.chr-hansen.com<http://www.chr-hansen.com/> [cid:image001.gif@01D78DDD.E64B91C0] ________________________________ Disclaimer: This e-mail, including any attachments, is for the intended recipient only. If you have received this e-mail by mistake please notify the sender immediately by return e-mail and delete this e-mail and any attachments, without opening the attachments, from your system. Access, disclosure, copying, distribution or reliance on any part of this e-mail by anyone else is prohibited. This e-mail is confidential and may be legally privileged. Chr. Hansen does not represent and/or warrant that the information sent and/or received by or with this e-mail is correct and does not accept any liability for damages related thereto. https://www.chr-hansen.com/en/legal-notice

2 2

MSSQL database size
by Rando Sui 09 Aug '21

09 Aug '21

Hello, I would like to monitor MSSQL database size, how to do that? Has anybody done this? Greetings, Rando.

1 0

Empty alert check page
by Laszlo Nemeth 09 Aug '21

09 Aug '21

Hello After i upgraded to 11518 (from a 106XX) the Alerts check page is empty. I attached a picture about it. Looks like sometime some page can generate (so example after i press a rebuild or check any category like Devices or Storages sometimes (1 from 10 times) i got the list and all alert listed on the left side, but offen the page is just empty. Looks like every other things working, just the Alert check page is empty. Br Laszlo

2 2