- observium - lists.observium.org

Redundancy Mode (C2900)
by Robert Williams 22 Oct '18

22 Oct '18

Hi, We've had a few customer devices generate alerts overnight for 'Operational Redundancy Mode' = nonRedundant Example below: It appears to be a newly detected element during a discovery run - but in all (of our) scenarios it is now in alarm as the customers do not have them operating in redundancy mode. As far as I can tell it's not configured at all on them. Obviously I can filter them out from the alert ("Customer - Status Alert") but it would be nice if I could hide them from the main pages (or stop it from being polled at all). Alternatively, does anyone know what element in our device config may be triggering this to show up, so that I can modify the configs to remove it? Thanks! Robert Williams Custodian Data Centres https://www.CustodianDC.com

3 3

Alert Checker for Printer Toner
by Walter Onda 20 Oct '18

20 Oct '18

Hello I spent a long time to make a toner alert when it arrive lower than 2 %, it doesn't matter which color. Is this condition correct? Because some of this printer has just 1% but it shown as "ok". Has maybe somebody an suggestion? Regards and have a nice weekend Walter

2 3

Discovering storage again - every time discovery is run
by Niklas Larsson 18 Oct '18

18 Oct '18

Hi, after r9479 (ish) we get this in the log every time discovery is running: Attached log from: ./discovery.php -d -h gluster02.example.com -m storage storage module is creating the logging. /niklas

3 10

Distinct alerting when several custom OID on the same device
by Thibault Richard 17 Oct '18

17 Oct '18

Hello, I've finally succeed to create alerting on custom OID Unfortunately, I'm now facing another issue I've one device with 2 custom OIDs * The device called "depanne" have 2 custom OID named "mailnotsent" and "checkdbconnection" I 've created one alert with this basic condition Currently if one of the 2 OID got a different value than 0, I receive the alert message "checkdbconnections fails" which correspond to the message I've defined It's OK when "checkdbconnections" fails but not when "mailnotsent' fails In other words, if the OID value for "mailnotsent" is not 0, I'm receiving a non-related message. I would like to create one alert related to one OID As checker condition for a custom OID I can only use a metric and the only available metric is the OID value. I know I cannot filter on the condition So I'm trying to filter thanks to the "association" In the previous version (which is still the documented one) it was possible to specify a device and an entity But as the current version no longer propose us a free field for this, I've tried to filter with several solution like this one It unfortunately doesn't work. How could I specify an alert is only linked to one OID ? Best Regards Thibault

2 7

MIB for FS.COM switches
by Pieter Meyer 16 Oct '18

16 Oct '18

Hi guys How can we add better support for switches from FS.COM Regards Pieter Meyer Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: +27 83 233 6614 <https://goo.gl/maps/WHe3soT1fHm> map | <http://www.convergedgroup.net/> website | <http://www.convergedgroup.net/blog/> company blog | <http://www.linkedin.com/company/converged-telecoms> linkedin CAUTION: This email and any attachments may contain information that is confidential and subject to legal privilege. If you are not the intended recipient, you must not read, use, disseminate, distribute or copy this email or any attachments. If you have received this email in error, please notify us immediately and erase this email and any attachments. Thank you. DISCLAIMER: To the maximum extent permitted by law, Converged Group is not liable (including in respect of negligence) for viruses or other defects or for changes made to this email or to any attachments. Before opening or using attachments, check them for viruses and other defects. The information contained in this document is confidential to the addressee and is not the view nor the official policy of Converged Group unless otherwise stated.

2 1

Stormshield firewalls log
by Luca Sasdelli 16 Oct '18

16 Oct '18

Hello all, we've several Stormshield firewall (FreeBSD-based) to monitor with Observium; most of them send their syslog properly, but with three of them, the syslogs are correctly received on observium server (seen with tcpdump), but not displayed within the respective entries. The hostnames does match the ones used with the device names. The Syslog setup allows unknown host. The syslog messages filters doesn't match any possible string in the incoming logs on mentioned devices. By enabling syslog debug, the observium log writes the correspondent files successfully. What else should I check for this issue? Rev. 18.10.9470 Thanks! Luca

3 4

Citrix Netscaler 12.x
by Adam Armstrong 15 Oct '18

15 Oct '18

Hi Guys, Citrix seem to have broken SNMP in Netscaler 12.x. Best not to try those versions for now if you value your data collection. Adam. ⁣Sent from BlueMail

3 3

RANCiD version labels
by Eric W. Bates 14 Oct '18

14 Oct '18

Just finished adding RANCiD configs to observium and it's quite slick. Thanks for doing that. When displaying config versions, observium uses the git'ish 7-char truncations of the full hash to label those versions. While the time stamps are viewable when hovering the mouse over those links, most of my network team are non-coders and are put off by hex strings (never heard of git). Is there a knob I can tweak in config.php to just change those labels to the time stamp instead? Thanks for your time. -- Clark 159a, MS 46 508/289-3112

1 0

pdf.php
by David Jesus Maturano Sanchez 13 Oct '18

13 Oct '18

Testing this file, I see this message: /opt/observium/html# php pdf.php PHP Fatal error: require_once(): Failed opening required 'includes/tcpdf/config/lang/eng.php' (include_path='/opt/observium/libs/pear:/opt/observium/libs:.:/usr/share/php') in /opt/observium/html/pdf.php on line 27 What do I need to run this? Rergards David.

2 1

Change e-mail address at jira.observium.org
by xomka686 13 Oct '18

13 Oct '18

Hi, I want to change an e-mail used in my account at jira.observium.org, but User Profile page in Jira doesn't allow to do that (in fact, account Summary page is just empty). Can you advice me the right button for e-mail change? -- Best, Sergey

1 0