- observium - lists.observium.org

UPS autodiscovery
by Eric W. Bates 24 Aug '18

24 Aug '18

What flavor UPS'en do folks find work best with Observium? The brand I'm using now doesn't support lldp or cdp and I haven't been able to collect anything. -- Clark 159a, MS 46 508/289-3112

3 4

Re: [Observium] Static routes
by Mike Stupalov 23 Aug '18

23 Aug '18

This is huge.. NO, really very huge tables. Discovery can fetch this table more than 10-20-30 mins. I already was test with such ability, many devices just did stop respond after try to fetch this table. > Klimek, Denis <mailto:DKlimek@Stadtwerke-Norderstedt.de> > 23 August 2018 at 13:55 > > Hi, > > what is your opinion about extracting also the static configured > routes from the device? > > Possible SNMP OID would be .1.3.6.1.2.1.4.24.7 > > We have the case that multiple prefixes are staticly configured and > that we are able to fetch them in the Observium database for 3^rd > party purposes that we built around. > > I know that pulling the routes from a device with a BGP full route > takes a lot of time, but maybe it can be implemented into the > discovery module instead of the poller. > > A way to ignore BGP or to exclude everything except static is not > known so far…. From my side. > > Mit freundlichem Gruß > > Stadtwerke Norderstedt > > *Denis Klimek* > > Professional Network Engineer > > IP-Systemtechnik > > Tel: 040 / 521 04 – 1049 > > Mobil: 0151 / 652 219 06 > > dklimek(a)stadtwerke-norderstedt.de > <mailto:dklimek@stadtwerke-norderstedt.de> > > www.stadtwerke-norderstedt.de <http://www.stadtwerke-norderstedt.de/> > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1

Dashboards
by Cederlund Tobias 23 Aug '18

23 Aug '18

Hi A few months ago I noticed the appearance of a "Default Dashboard" under Overview in the menu. There's also a nice "Add to Dashboard" button on graph-pages to add the graph to a dashboard. This seems like a fantastic feature but right now there only the "Default Dashboard". Is it possible add more dashboards? ...and if so, how? I also haven't seen any documentation of this very nice feature. Are there any? Med vänlig hälsning Tobias Cederlund Systemspecialist Driftstöd Länsstyrelsernas IT-avdelning 351 86 VÄXJÖ Besök: Kungsgatan 8, Växjö 010 - 224 44 61 (+46 10 - 224 44 61) 070 - 524 85 57 (+46 70 - 524 85 57) tobias.cederlund(a)lansstyrelsen.se<mailto:tobias.cederlund@lansstyrelsen.se> www.lansstyrelsen.se/vastragotaland<http://www.lansstyrelsen.se/vastragotaland>

1 0

Hardware showing as generic not openvz
by Simon Mousey Smith 23 Aug '18

23 Aug '18

Hi All Im trying to work out if im being stupid or something isnt right? Some machines we monitor are showing the hardware as 'OpenVZ Containers' but others are being found as 'Generic x86' I have installed the distro script on all the machines and im using the latest version 2.0 script Output from one of the machines which is an openvz container - Linux|4.4.0|amd64|Ubuntu|16.04||openvz Am I missing something? Regards Simon

2 2

Static routes
by Klimek, Denis 23 Aug '18

23 Aug '18

Hi, what is your opinion about extracting also the static configured routes from the device? Possible SNMP OID would be .1.3.6.1.2.1.4.24.7 We have the case that multiple prefixes are staticly configured and that we are able to fetch them in the Observium database for 3rd party purposes that we built around. I know that pulling the routes from a device with a BGP full route takes a lot of time, but maybe it can be implemented into the discovery module instead of the poller. A way to ignore BGP or to exclude everything except static is not known so far.... From my side. Mit freundlichem Gruß Stadtwerke Norderstedt Denis Klimek Professional Network Engineer IP-Systemtechnik Tel: 040 / 521 04 - 1049 Mobil: 0151 / 652 219 06 dklimek(a)stadtwerke-norderstedt.de<mailto:dklimek@stadtwerke-norderstedt.de> www.stadtwerke-norderstedt.de<http://www.stadtwerke-norderstedt.de/>

1 0

Ricoh private MIB
by Mike Stupalov 22 Aug '18

22 Aug '18

Someone can get RicohPrivateMIB from an restricted vendor area? RICOH places in open access only PDF file with mib description. > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 09:39 > Haha, new words for learn: zaebis', pizdetc > > I did not plan on writing it.. but a small insomnia :D > Mike Stupalov <mailto:mike@observium.org> > 22 August 2018 at 03:01 > Hi, > > do not post here links to an *nms urls/issues ;) > > Ricoh is very hidden vendor.. No ways for fetch latest private MIB. > > But I was added toner/ink discovery for Ricoh in r9379 :P > -- Mike Stupalov Observium Limited, http://observium.org

2 1

Custom OID Metric Conditions (now with 100% more attachment)
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0

Custom OID Metric Conditions
by Brandwatch NOC 22 Aug '18

22 Aug '18

Hi, The attached image shows some custom OIDs I have set up to monitor Juniper QFX VCP link status. These work fine and I see the custom graphs (gauges where state 1 = link up, state 0 = link down). The last bit I need to figure out is how to alert on them. I think I'm 90% of the way there. You can see the custom OIDs in the top browser window. In the bottom browser window, I'm unsure how to refer to the custom OIDs in the "conditions" bit. Any help gratefully accepted - I've got this far without bothering anyone but I've fallen at the last hurdle. Thanks! Chris -- Chris Tomkins Brandwatch | Senior Network Engineer (Linux/Network) christ(a)brandwatch.com | (+44) 01273 448 949 @Brandwatch New York | San Francisco | Brighton | Singapore | Berlin | Stuttgart Discover how organizations are using Brandwatch to create their own success <https://www.brandwatch.com/customer-success/> Email disclaimer <http://www.brandwatch.com/email-disclaimer/> [image: bw-signature logo.png]

1 0

Re: [Observium] Show ink levels for Ricoh printers
by Mike Stupalov 22 Aug '18

22 Aug '18

Hi, do not post here links to an *nms urls/issues ;) Ricoh is very hidden vendor.. No ways for fetch latest private MIB. But I was added toner/ink discovery for Ricoh in r9379 :P > Simon Mousey Smith <mailto:simonsmith5521@gmail.com> > 21 August 2018 at 16:48 > Hi All > > This is a message to ask people can they try these SNMP OIDs in the > link below on there Ricoh printers? > > We have a few Ricoh printers that just show SOME SPACE in observium > and would love to see values! > > I discovered this link by accident and they appear to be working on > our few printers! > > Currently using the printer-mib only reveilles -3, -2, -1 which isnt > helpful... > > But the link below uses ricohs private mib which appears to work! > > https://github.com/librenms/librenms/issues/4177#issuecomment-241957542 > > If they work for others, could the wonderful amazing observium team > implement these oids into the existing checker to show stats :) > > Regards > > Simon - Hestor Ltd > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 2

Re: [Observium] db.log - Failed dbQuery
by Mike Stupalov 21 Aug '18

21 Aug '18

I think should be fixed in r9378. > Aaron Mayfield <mailto:amayfield@neverfail.com> > 21 August 2018 at 03:22 > > I recently noticed my db.log file had grown to 18GB in size (I noticed > because it filled my drive). It is filled by entries like this: > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-2320-005056a94437-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','2320','223078','005056a94437','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3004-005056a93130-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3004','223078','005056a93130','') > > [2018/08/20 14:11:56 -0500] poller.php(12451): Failed dbQuery (#1062 - > Duplicate entry '88-3031-0050565b341c-223078' for key > 'dev_vlan_mac_port'), Query: INSERT INTO `vlans_fdb` > (`device_id`,`vlan_id`,`port_id`,`mac_address`,`fdb_status`) VALUES > ('88','3031','223078','0050565b341c','') > > It continues to quickly grow and log entries all for different > devices/mac addresses/vlans. Anyone else run into this recently? > > Here is version info (I updated today to make sure there wasn’t a > recent fix): > > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov Observium Limited, http://observium.org

2 1