- observium - lists.observium.org

Assistance with Port Alert Checker
by Chip Pleasants 18 Nov '14

18 Nov '14

Hi all, I'm looking for a little help figuring our why my port alert checker didn't seem to work.I set up port alert checker to trigger when greater than 80%. The actual usage was at 100% for a couple hours. This is a gigabit interface set to 100m with a bandwidth statement. The screen shot reflects the 100m speed correctly. I've attached a couple screen shots with my port and alert check. Any ideas why it didn't fire off? Thanks, Chip

3 3

Exim module problem
by Manuele Di Nunzio 18 Nov '14

18 Nov '14

Hi al All, I've added at Unix agent the exim module (I've already apache). But Observium can't locate this module. If I type from local server 'telnet myip 36602' there are the exim information. What could be the problem? Thank You in advance for your help

1 0

Performance
by Desir Antoine 18 Nov '14

18 Nov '14

Hi, A solution for a large network like yours could be using a distributed architecture. Here is a feedback from our usage : Current architecture in our organisation graphs 2000 devices and 70k ports and target is 6000 devices. We have built a farm of Observium pollers ( 6 physical servers ) and 1 more for mysql server (+Apache for GUI). Our 6 poller servers are 70% CPU idle and disks are ok for now. We progressively are adding new devices. We did a small patch in mysql scheme, to add a "poller_id" into devices table. At each new device added, script "add_device.php" choose the poller the least used (based on numbers of devices per poller server). Each poller asks to SQL Server devices with its poller_id. The GUI server can read via NFS all rrd files stored in pollers. Hardware used for each poller is HP DL360 Gen7 / 4 GB RAM / 6 disks SAS 10k Raid 1+0 / 2*E5620 2.40Ghz (4 cores each). Here is a diagram : http://imagizer.imageshack.us/a/img538/3225/iMXiYb.png By the way, may it be a good idea to add this distributed feature for monitoring of large platforms (adding the poller_id field into devices table) ? Cheers, Antoine Desir ________________________________ Ce message et les pi?ces jointes sont confidentiels et r?serv?s ? l'usage exclusif de ses destinataires. Il peut ?galement ?tre prot?g? par le secret professionnel. Si vous recevez ce message par erreur, merci d'en avertir imm?diatement l'exp?diteur et de le d?truire. L'int?grit? du message ne pouvant ?tre assur?e sur Internet, la responsabilit? de Worldline ne pourra ?tre recherch?e quant au contenu de ce message. Bien que les meilleurs efforts soient faits pour maintenir cette transmission exempte de tout virus, l'exp?diteur ne donne aucune garantie ? cet ?gard et sa responsabilit? ne saurait ?tre recherch?e pour tout dommage r?sultant d'un virus transmis. This e-mail and the documents attached are confidential and intended solely for the addressee; it may also be privileged. If you receive this e-mail in error, please notify the sender immediately and destroy it. As its integrity cannot be secured on the Internet, the Worldline liability cannot be triggered for the message content. Although the sender endeavours to maintain a computer virus-free network, the sender does not warrant that this transmission is virus-free and will not be liable for any damages resulting from any virus transmitted.

3 2

E-mail Notifications & Backend Settings
by Jacob Chavez 18 Nov '14

18 Nov '14

Hello, does anyone know which parameters need to be added within config.php to enable e-mail notifications. Also, where do I configure the backend settings? Is that in config.php as well? Below is what I got from the documentation and I was able to send a test e-mail from Observium, but not receive a message if a device was down when I tested that portion. Any help is appreciated. Thank you! Jacob Email backend settings $config['email']['enable'] = TRUE; Enable/Disable send email globally $config['email']['from'] = NULL; Mail from. Default: "Observium" <observium@`hostname -f`> $config['email']['default'] = NULL; Default alert recipient $config['email']['default_only'] = FALSE; Only use default recipient (all alerts send to default recipient) $config['email']['backend'] = 'mail'; Mail backend. Allowed: "mail" (PHP's built-in), "sendmail", "smtp". $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; // The location of the sendmail program. Sendmail specific options $config['email']['smtp_host'] = 'localhost'; // Outgoing SMTP server name. $config['email']['smtp_port'] = 25; // The port to connect. $config['email']['smtp_timeout'] = 10; // SMTP connection timeout in seconds. $config['email']['smtp_secure'] = NULL; // Enable encryption. Use 'tls' or 'ssl' $config['email']['smtp_auth'] = FALSE; // Whether or not to use SMTP authentication. $config['email']['smtp_username'] = NULL; // SMTP username. $config['email']['smtp_password'] = NULL; // Password for SMTP authentication. SMTP specific options For test email settings use test_mail.php script from main observium dirrectory.

2 1

Power Statistics
by Josh Hopper 15 Nov '14

15 Nov '14

How do I make an alert for power where it alerts me if my amperage (current) is over 80%. For me that would be about 11 AMPs on my UPS. -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image001.jpg@01CFFFFF.5CF8B420] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

4 5

Junos 4-byte ASN support
by bt 15 Nov '14

15 Nov '14

Hello, I tried digging through the mailing archives but jet lag from my recent trip is stymieing my efforts in finding relevant threads. I'm running 0.14.11.5945 and notice that 4-byte ASN is still not supported. We use 4-byte ASN for the greater range as we eventually plan to run eBGP down to our servers. On Junos devices -- anything from MX, QFX to SRX -- I notice that ASNs show as a negative integer (example "-94967243"). On our Cisco's, they show up as our favorite 23456. The main question is: Are the negative integers a limitation of the Junos MIB? On those individual devices I do not have a "tab=routing/proto=bgp/", the BGP sessions do not show up at all under the general "routing -> BGP All Sessions" tab, and consequently we're missing a large chunk of our network and we don't have any BGP alerts (though I have all the above with Cisco Nexus gear). Are there any workarounds or plans to support 4-byte ASN in Observium, specifically with Junos equipment? Thank you! bt

3 3

Linux Load Average Alert Check
by Lane Eckley 15 Nov '14

15 Nov '14

Hi Guys, Has there been any changes to the alerting system that will allow us to create a check for a Linux system’s load average? Looking through the list archives it appears it wasn’t yet supported back in August, but I am unsure if that may have changed since then. Thanks! -Lane

3 3

Auto-discovery Woes
by Garland McAlexander 14 Nov '14

14 Nov '14

I'm having some major issues with Auto-discovery (read, I can't seem to get it working at all). Here is what I have in my config: $config['autodiscovery']['xdp'] = TRUE; // Autodiscover hosts via discovery protocols (CDP, LLDP, FDP, AMAP and other) $config['autodiscovery']['ospf'] = TRUE; // Autodiscover hosts via OSPF $config['autodiscovery']['bgp'] = TRUE; // Autodiscover hosts via iBGP $config['autodiscovery']['libvirt'] = TRUE; // Autodiscover hosts found via libvirt $config['autodiscovery']['ip_nets'] = array("10.0.0.0/8"); // Networks to permit autodiscovery $config['discover_services'] = TRUE; // Autodiscover services via SNMP on devices of type "server" I'm using resolution via hosts file, and I have about 150 machines there. However, autodiscovery seems to do nothing.

5 9

Re: [Observium] observium Digest, Vol 52, Issue 51
by Brett Jones 14 Nov '14

14 Nov '14

Hi there, We monitor APC pdu's here and have set up the following metrics: 41 PDU SENSOR ALARM notification of a warning/alert/down event on sensor sensor_event eq warning sensor_event eq alert sensor_event eq down type match power * This then picks up on all the sensors on that device: power banks 1 and 2 , power supply and voltage. Then if you go into the the node, click settings and then "sensor" you can manually set the min/ max for each one . once this hits it will alarm! Hope this helps ndex MIB Type Class Descr Current Min Max Custom Limits Reset Limits Alerts rPDULoadStatusLoad.1 apc current Bank Total 8.1A xx rPDULoadStatusLoad.2 apc current Bank 1 6.2A xx rPDULoadStatusLoad.3 apc current Bank 2 1.8A rPDUIdentDevicePowerWatts.0 apc power Input 1.86kW rPDUIdentDeviceLinetoLineVoltage.0 apc voltage Line-to-Line 230V rPDUPowerSupply1Status.0 powernet-rpdusupply1-state state Power Supply 1 powerSupplyOneOk Brett Jones 2nd/3rd line support engineer Tel: 01202 612000 Fax: 01202 612111 W:www.voip-unlimited.net E:brett.jones@voip-unlimited.net E:support@voip-unlimited.net Registered Office: Co Carter & Coley, 3 Durrant Road, Bournemouth, Dorset BH2 6NE Registered in England No: 05225497 -----Original Message----- From: observium [mailto:observium-bounces@observium.org] On Behalf Of observium-request(a)observium.org Sent: 14 November 2014 16:38 To: observium(a)observium.org Subject: observium Digest, Vol 52, Issue 51 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Power Statistics (Josh Hopper) ---------------------------------------------------------------------- Message: 1 Date: Fri, 14 Nov 2014 11:37:25 -0500 From: Josh Hopper <joshhopper(a)protectplus.com> To: Observium Network Observation System <observium(a)observium.org> Subject: [Observium] Power Statistics Message-ID: <5BBFC1D5E54E9341821836E23038ADEC04DC527A21E1@SVR-EXCHANGE> Content-Type: text/plain; charset="us-ascii" How do I make an alert for power where it alerts me if my amperage (current) is over 80%. For me that would be about 11 AMPs on my UPS. -- Sincerely, Joshua Hopper, A+ CE Network Administrator [cid:image001.jpg@01CFFFFF.5CF8B420] 420 3rd Ave NW Hickory NC 28601 Office: 828-449-1839x2160 | Cell: 828-855-7565 Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

1 0

Memory Metrics
by Josh Hopper 14 Nov '14

14 Nov '14

I'm having a little trouble. Metrics mempool_free mempool_perc mempool_used Using the above how would I properly setup an alert to notify me if my memory being used is over 65%? I'm not sure I understand how to properly use _free, _perc and _used. -- Sincerely, Josh Protect Plus Air Holdings, LLC and Affiliates, Protect Plus, LLC and Affiliates, Imagine One Resources, LLC and Affiliates, Protect Plus Surfaces, LLC and Affiliates Confidentiality Notice: This e-mail is intended only for the addressee named above. It contains information that is privileged, confidential or otherwise protected from use and disclosure. If you are not the intended recipient, you are hereby notified that any review, disclosure, copying, or dissemination of this transmission, or taking of any action in reliance on its contents, or other use is strictly prohibited. If you have received this transmission in error, please reply to the sender listed above immediately and permanently delete this message from your inbox. Thank you for your cooperation.

2 2