- observium - lists.observium.org

Device Alerts on the Frontpage
by Aaron Hite 07 Jul '15

07 Jul '15

Guys, I have a question regarding alerts showing up on the frontpage. I have alerts coming to me via email when I have a alert checker looking at the memory going above 50% (testing this operation). But on the frontpage I do not see this show up in either the status boxes or under the device alerts section. I search around and can not find anything that I changed that would prevent this from showing up on the frontpage. I am sure I did something, but just not sure what? Any pointers or direction to start looking would be appreciated. Thanks, Aaron

2 5

Linux Memory Alerts
by Jason LeBlanc 07 Jul '15

07 Jul '15

Hi all, We're running PE 0.15.7.6539, it seems no matter what I set thresholds for on memory utilization for cached (I can ignore this..) and physical memory. I can look at the graphs and set thresholds to 90-95% and always get alarms. Any ideas or advice? Jason LeBlanc IT Consultant Direct: 678-387-5529 | Cell: 954-461-6492 [CTG-logo-TAG-COLOR] 2030 Powers Ferry Road SE | Suite 130 | Atlanta, GA 30339 Main: 404.352.3000 | Fax: 404.352.2962 | www.ctgatlanta.com

2 2

virtual hosts stats
by Patrick Marquetecken 07 Jul '15

07 Jul '15

All, Is it possible to display traffic for several hosts ? Now I can see only the compete traffic for the http service, I would like to see the traffic for each virtual host. Or give me some pointers to get me on the way, BTW i’m not a programmer only a system engineer. Thanks

3 3

Support
by Dave Bats 07 Jul '15

07 Jul '15

Dear Observium Team,, We need your support on this, we try to install MIB's from Eltek(power supply tool) in Observium. We did receive the MIB's from Eltek. After install the MIB's and reboot we see that the system is trying to Read the Eltek MIB's but we see that OID's in the system are not recognized. Is there a way how we can solve this problem, do we need to add some script in Observium to make it work? You support is more than welcome! Kind Regards, Dave Bats

2 3

mysql_fetch_array replacement?
by Robert Williams 06 Jul '15

06 Jul '15

Hi, After the SVN up on the 18th July the script we use for generating the Smokeping targets stopped producing any data (the list of slightly reformatted hostnames). The script itself was taken from this mailing list about 2 years ago and is as follows: #!/usr/bin/env php <?php include("/opt/observium/includes/defaults.inc.php"); include("/opt/observium/config.php"); include("/opt/observium/includes/definitions.inc.php"); include("/opt/observium/includes/functions.php"); echo "*** Targets ***\n\nprobe = FPing\n\nmenu = Top\ntitle = Network Latency Grapher\nremark = Welcome to SmokePing\n\n"; $query = mysql_query("SELECT hostname FROM `devices` WHERE `disabled`=0 ORDER BY hostname"); while ($data = mysql_fetch_array($query)) { $hostid = str_replace(".","_",$data['hostname']); $hostname = $data['hostname']; echo "+ $hostid\n\nhost = $hostname\n\n"; } ?> I can see that /includes/functions.php no longer exists but it’s replacement in functions.inc.php does not appear to have a function for mysql_fetch_array(). So my question is, can someone point me to the correct replacement function for this? I’ve had a look through it and can’t see what I’m looking for, but PHP is not my ‘thing’ so I’m missing it. Any assistance appreciated! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 6

Access to Alerts
by Andrew Colin 06 Jul '15

06 Jul '15

Hi Guys Is there a way to give a user that has "normal user" Level access to view their event logs as currently it doesn't allow. Kind Regards Andrew Colin Converged Telecoms (Pty) Ltd. Licensed Telecoms Operator : (0258/IECS/JAN/09) (0258/IECNS/JAN/09) Switchboard: +27 (0)10 591 4600 Email: <mailto:andrew@convergedgroup.net> andrew(a)convergedgroup.net Web: http://www.convergedgroup.net 75 Witkoppen Road, Northriding, Johannesburg, 2169 P O Box 7246, Weltevredenpark, 1715 This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you.E-mail including attachments is susceptible to data corruption, interception, unauthorized amendment, tampering and viruses, and we only send and receive emails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.

1 0

DD-WRT question
by Roland Hill 06 Jul '15

06 Jul '15

Hi, I run Observium on my home network, so appreciate the CE Edition (CE 0.15.6.6430). I have 2 dd-wrt based switches, and I remember when they were first discovered by Observium quite a while back, they displayed a dd-wrt logo on the device list. This hasn't occurred for a while now, and I just was interested to know if it is possible for this to happen? Screen shots attached fyi (hopefully they won't get stripped). This is a very minor question (hope the "noise is okay"), but if anyone has an answer I'd appreciate it. -- Regards, Roland Hill

3 7

Re: [Observium] potential purchase issue
by Adam Armstrong 03 Jul '15

03 Jul '15

Hi Andy, It seems sometimes the payment processor is a tiny bit slow at sending us subscription creation events. It is all automated, though! Usually on a Friday, too! Thanks, Adam. On 3 Jul 2015 11:28, "Franks Andy (IT Technical Architecture Manager)" <Andy.Franks(a)sath.nhs.uk> wrote: > > Hi All, > > The subs are showing now, not sure if someone tweaked something somewhere. Still no email but thanks. > > Thanks > > Andy > > > > From: observium [mailto:observium-bounces@observium.org] On Behalf Of Franks Andy (IT Technical Architecture Manager) > Sent: 03 July 2015 10:39 > To: 'observium(a)observium.org' > Subject: [Observium] potential purchase issue > > > > Hi all, > > Who would I speak to about not having purchase confirmation come back from the paddle purchasing screen? > > I fought for ages to get my boss to approve of the spend and the hospital actually got a credit card in line with the requirements for the site. Now we’ve paid for the subs, got the big green tick under the hamster logo in the payment processing screen, but then after dropping back to the subs screen in the account area, it says we have no paid subscription. I also haven’t received an email yet, and it’s been a while. > > I am concerned! > > Thanks > > Andy Franks. > > > > > >

1 0

Scaling adjustment for UPS sensors
by Robert Williams 03 Jul '15

03 Jul '15

Hi, Is there a way to adjust the re-scaling for auxiliary UPS sensors? We’ve just been given some external sensors for our Riello units to play with; and whilst Observium can indeed see them, their temperatures are out by one decimal place: [cid:image001.png@01D0B4D2.A73E1560] (it should be 19.5C, obviously) The RH is fine interestingly, and this is only affecting the ‘external’ sensors in the NetMan card, not the built-in sensor. Interestingly, Riello also give out the ‘chassis’ temperature under the ‘battery’ temperature OID, which is why it shows our batteries as 27 degrees, they are not - and this is not Observium’s fault ☺ Anyway, is there a manual ‘tweak’ to correct the scaling for the temperature? Cheers! Robert Williams Custodian Data Centre Email: Robert(a)CustodianDC.com http://www.CustodianDC.com

4 12

Re: [Observium] ifSpeed/ifHighSpeed messages - HP C7000 Virtual Connect
by Oesterlin, Robert 03 Jul '15

03 Jul '15

We saw the same thing when we tested SolarWinds, so it’s definitely on the HP side. Pending me to get HP to actually fix the bug, can you think of a way I can suppress these messages, either filtering them out or limiting the SNMP response? Of course I can always tweak the code, but that’s a last resort option. Bob Oesterlin Sr Storage Engineer, Nuance Communications 507-269-0413

2 2