- observium - lists.observium.org

wrong post
by Joel Guillerm 05 Sep '14

05 Sep '14

sorry for previous post about netdisco; my mistake

1 0

(no subject)
by Joel Guillerm 05 Sep '14

05 Sep '14

Hello Chris, thanks for your feedback; in the meantime, I had downloaded and tested the netdisco demo VMware appliance and got some problems ; I posted the following mail on the netdisco mailing list but did not get any feedback yet; if you have any ideas, thanks in advance Joel ************************************************* newbie in netdisco, just downloaded and tested netdisco demo VMWare package (V1.0 netdisco version ... a bit too old maybe, even for a test) To run a quick test, 1) I just edited community values and uncomment "discover_only =" statement followed by a comma-separated list of IP routers to be discovered in /usr/local/netdisco/netdisco. conf ; I let "#discover_no =" statement untouched ; 2) then, I restart netdisco via : ./netdisco -p restart ==> OK after a few minutes, I still did not see any IP routers added on the discover_only list shown via web interface; nothing shown in /usr/local/netdisco/data/logs apart from messages related to "netdisco starting" 3) so, I tested the 2 manual commands below via SSH : ./netdisco -d xxx.xxx.xxx.xxx (for 1 single IP) ./netdisco -r xxx.xxx.xxx.xxx,yyy.yyy.yyy. yyy, zzz.zzz.zzz.zzz, .... for my list of IPs routers Both commands work successfully and results are OK via web interface Questions : a) what else should I do to avoid having to issue the manual commands and let netdisco do its job ? b) with recent netdisco versions, is there a function that allows to export resulting infos (such as the Devices List with their discovered ard/soft infos) as a CSV file for example ? thanks for any help *************************************************

1 0

Accounting for electricity
by Simon Schmitz 05 Sep '14

05 Sep '14

Hi, what do you think of an accounting for electricity, the same as the network port on a switch only here of a PDU switch. Simon

3 2

Alerts for Network devices›
by Darian Jimenez 04 Sep '14

04 Sep '14

Hello, I just need basics on alerting if device is down or maybe if VPN interface is down etc. Attached I set an alert to just try and find devices that are currently "up" to see if it discovers them with the names starting as fw*. Once it works I will change to check for devices that are “down” What am I doing wrong here since it isn't finding anything.

3 4

Re: [Observium] Alerts for Network devices›
by Adam Armstrong 04 Sep '14

04 Sep '14

1 0

How to limit Discovery/Polling to infos visible on the main Device panel ?
by Joel Guillerm 04 Sep '14

04 Sep '14

Hello, newbie in Observium ; is it possible to configure Observium to limit its job to get only the informations available on the main Devices panel ? i.e. Device/Location, Platform, Operating System, Uptime/Sysname so, nothing about interfaces, CP, RAM, ... This would be for quick and basic Device inventory purpose only for some environments The idea is to reduce the total discovery/polling time to the minimum for this basic inventory, otherwise, this could last very long time in case of 100's of devices to deal with. thanks for any advice

2 1

Re: [Observium] Google Maps not showing
by Christian Gerbrandt 03 Sep '14

03 Sep '14

I have this in my config: $config['geocoding']['api'] = 'google'; And is working fine. Where can I find information about this config changes? On Sep 01, 2014, at 05:02 PM, Adam Armstrong <adama(a)memetic.org> wrote: On 2014-09-01 16:23, Sebastian Pitei wrote: > Hi everyone, > > First, congrats ot the devs for making such a nice piece of software. > Simple, to the point, perfect! > > Second, my issue: I'm trying to change the maps engine to Google Maps. > I've change the engine to "google" in config.php but unfortunately > nothing is happening. Any ideas? google-mc is the default, and the only one currently expected to work. The old API map was kinda messy, and no one really uses it anymore. adam. _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 2

Observium Draw errors
by Adriaan Smuts 03 Sep '14

03 Sep '14

Hi Guys, For some reason Observium is giving Draw Errors on all of our graphs. This started happening after the latest svn update. We have this error on our live observium and our staging/testing one. Does anyone know how to fix this? Please see screenshot below: [cid:image001.png@01CFC769.4007A4D0] Regards Adriaan Smuts Systems Administrator - Windows [file:///C:\Users\adriaan\AppData\Roaming\Microsoft\Signatures\WebAfrica_Files\signature_logo.jpg] ________________________________ Direct Line +27 21 464 9565 Reception 086 000 9500 Website www.webafrica.co.za<http://www.webafrica.co.za/>

2 2

Apache 2.4 config (for newer versions of Linux)
by Tristan Rhodes 03 Sep '14

03 Sep '14

I saw in the list archives that someone recently asked about using newer versions of Linux with Observium. I am not an Apache expert, but I got it working by simply changing to "Require all granted" in the recommended Observium config: http://httpd.apache.org/docs/2.4/upgrading.html root@observium:/opt/observium/includes# cat /etc/apache2/sites-available/000-default.conf <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /opt/observium/html <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /opt/observium/html/> Options Indexes FollowSymLinks MultiViews AllowOverride All Require all granted </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined ServerSignature On </VirtualHost> I also had to manually enable the php5-mcrypt module: sudo php5enmod mcrypt sudo service apache2 restart I hope this was helpful! Tristan *Tristan Rhodes* Network Engineer Weber State University 801.626.8549

2 1

Re: [Observium] observium Digest, Vol 50, Issue 5
by matthew waterman 03 Sep '14

03 Sep '14

ok great, I will get a few basic alerters programmed and await an update at some stage with further examples. I will update tommorrow if the alerts have been successful. I like the send recovery toggle - sometimes the little hamster would go ape for up to 20 emails with a missed SNMP down. Glad to send the end of that. Matt On 1 September 2014 20:34, <observium-request(a)observium.org> wrote: > Send observium mailing list submissions to > observium(a)observium.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > or, via email, send a message with subject or body 'help' to > observium-request(a)observium.org > > You can reach the person managing the list at > observium-owner(a)observium.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of observium digest..." > > > Today's Topics: > > 1. Re: observium Digest, Vol 50, Issue 3 (Tom Laermans) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 01 Sep 2014 10:32:27 +0200 > From: Tom Laermans <tom.laermans(a)powersource.cx> > To: Observium Network Observation System <observium(a)observium.org> > Subject: Re: [Observium] observium Digest, Vol 50, Issue 3 > Message-ID: <54042F1B.8060804(a)powersource.cx> > Content-Type: text/plain; charset="windows-1252"; Format="flowed" > > Hi Matt, > > Yes, the legacy alerters have been removed as they did not work very > well. The new alerting system is a lot better. > > I was planning to create example alerts to replicate the old ones, but I > haven't gotten around to that unfortunately. > > For example, device rebooted: > > - Entity type: device > - Alert conditions: device_uptime < 300 > - Entity match: * > - Device match: * > > + Turn off "Send recovery" so you don't get a recovery mail after 5 > minutes. > > Tom > > On 09/01/2014 10:25 AM, matthew waterman wrote: > > hmmm, > > > > I think I am beginning to see the error in my ways perhaps, > > > > I do not have any Alert-checkers..... > > > > I have never had to add them or go near them as the version I was > > originally running just simply emailed me with Device down, device up, > > device rebooted, or if I wanted it to - port down etc > > > > So the new version will not do this by default? Do I need to created > > alert checkers for all my devices? > > > > matt > > > > > > > > On 1 September 2014 19:53, <observium-request(a)observium.org > > <mailto:observium-request@observium.org>> wrote: > > > > Send observium mailing list submissions to > > observium(a)observium.org <mailto:observium@observium.org> > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > or, via email, send a message with subject or body 'help' to > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > > You can reach the person managing the list at > > observium-owner(a)observium.org <mailto:observium-owner@observium.org> > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of observium digest..." > > > > > > Today's Topics: > > > > 1. Re: observium Digest, Vol 50, Issue 1 (Tom Laermans) > > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Mon, 01 Sep 2014 09:52:26 +0200 > > From: Tom Laermans <tom.laermans(a)powersource.cx > > <mailto:tom.laermans@powersource.cx>> > > To: Observium Network Observation System <observium(a)observium.org > > <mailto:observium@observium.org>> > > Subject: Re: [Observium] observium Digest, Vol 50, Issue 1 > > Message-ID: <540425BA.6050808(a)powersource.cx > > <mailto:540425BA.6050808@powersource.cx>> > > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > > > Hi, > > > > Please share your alert checker configuration (screenshot) so we > > can see > > if those are alright, first. > > > > Tom > > > > On 01/09/2014 09:46, matthew waterman wrote: > > > Thanks for your replies, > > > > > > I have un commented the line "$config['poller-wrapper']['alerter'] > > > = TRUE;" , and also confirmed that I have the correct cron job > > > configured. I then gave the VM a reboot as It is one of the devices > > > that I observe. Unfortunalty i did not receive an email alert, so I > > > reboot another device for a full 5 minutes so I should have > > received 1 > > > x email alert for device down and 1 x reboot alert. I did not > > receive > > > either. Is there a way I can monitor/watch the email being sent or > > > processed to confirm that it is indeed happening? > > > > > > Matt > > > > > > > > > On 1 September 2014 11:20, <observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > <mailto:observium-request@observium.org > > <mailto:observium-request@observium.org>>> wrote: > > > > > > Send observium mailing list submissions to > > > observium(a)observium.org <mailto:observium@observium.org> > > <mailto:observium@observium.org <mailto:observium@observium.org>> > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > > or, via email, send a message with subject or body 'help' to > > > observium-request(a)observium.org > > <mailto:observium-request@observium.org> > > > <mailto:observium-request@observium.org > > <mailto:observium-request@observium.org>> > > > > > > You can reach the person managing the list at > > > observium-owner(a)observium.org > > <mailto:observium-owner@observium.org> > > <mailto:observium-owner@observium.org > > <mailto:observium-owner@observium.org>> > > > > > > When replying, please edit your Subject line so it is more > > specific > > > than "Re: Contents of observium digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Email setup in Config.php (matthew waterman) > > > 2. Re: Email setup in Config.php (Tristan Rhodes) > > > 3. Re: Email setup in Config.php (Nathan Phelan) > > > > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Mon, 1 Sep 2014 08:32:15 +1200 > > > From: matthew waterman <mwaterman1982(a)gmail.com > > <mailto:mwaterman1982@gmail.com> > > > <mailto:mwaterman1982@gmail.com > > <mailto:mwaterman1982@gmail.com>>> > > > To: observium(a)observium.org <mailto:observium@observium.org> > > <mailto:observium@observium.org <mailto:observium@observium.org>> > > > Subject: [Observium] Email setup in Config.php > > > Message-ID: > > > > > > > > <CAMq=ffcjUmV--G_kqRpXMK+ugBQ6OB2eK+6dEsqza4mteHZx4Q(a)mail.gmail.com > > <mailto: > ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q(a)mail.gmail.com> > > <mailto: > ffcjUmV--G_kqRpXMK%2BugBQ6OB2eK%2B6dEsqza4mteHZx4Q(a)mail.gmail.com > > <mailto: > ffcjUmV--G_kqRpXMK%252BugBQ6OB2eK%252B6dEsqza4mteHZx4Q(a)mail.gmail.com>>> > > > Content-Type: text/plain; charset="utf-8" > > > > > > Hi, > > > > > > I have been using Observium for about 1 year successfully and > > > recently, > > > approximately 3mth ago, I subscribed to the paid version, > > upgraded > > > via SVN > > > and copied my config.php. I do not have working email alerts at > > > the moment > > > and would like to know what needs to be changed to get this > > > working again. > > > Below is a print of my config.php file. Please advise me as to > > > what needs > > > to be changed to get email working again. > > > > > > Config.php: > > > > > > <?php > > > > > > ## Have a look in includes/defaults.inc.php for examples of > > > settings you > > > can set here. DO NOT EDIT defaults.inc.php! > > > > > > // Database config > > > $config['db_host'] = "localhost"; > > > $config['db_user'] = "myuesrname"; > > > $config['db_pass'] = "mypassword"; > > > $config['db_name'] = "observium"; > > > > > > // Location > > > $config['install_dir'] = "/opt/observium"; > > > > > > // Thie should *only* be set if you want to *force* a > particular > > > hostname/port > > > // It will prevent the web interface being usable form any > other > > > hostname > > > #$config['base_url'] = "http://observium.company.com"; > > > > > > // Default community list to use when adding/discovering > > > $config['snmp']['community'] = array("public"); > > > > > > // Authentication Model > > > $config['auth_mechanism'] = "mysql"; // default, other > > options: > > > ldap, > > > http-auth, please see documentation for config help > > > > > > // Enable alerter > > > // $config['poller-wrapper']['alerter'] = TRUE; > > > > > > // Set up a default alerter (email to a single address) > > > > > > // SNMP Settings > > > $config['snmp']['timeout'] = 1000; # timeout in ms > > > $config['snmp']['retries'] = 6; # how many times to > > > retry the > > > query > > > > > > //Ping Settings > > > $config['ping']['timeout'] = 2000; # timeout in ms > > > $config['ping']['retries'] = 10; # how many times to > > > retry the > > > query > > > > > > //Alert Settings > > > $config['alerts']['email']['default'] = > > "myemail(a)domain.co.nz <mailto:myemail@domain.co.nz> > > > <mailto:myemail@domain.co.nz <mailto:myemail@domain.co.nz>>"; > > > $config['alerts']['email']['from'] = "observium.dev < > > > myeamil(a)domain.co.nz <mailto:myeamil@domain.co.nz> > > <mailto:myeamil@domain.co.nz <mailto:myeamil@domain.co.nz>>>"; > > > $config['alerts']['email']['default_only'] = TRUE; > > > $config['alerts']['email']['enable'] = FALSE; > > > $config['uptime_warning'] = "14400"; ## Time > to > > > display > > > reboot warning > > > //Poller and Discovery Modules > > > > > > //Syslog settings > > > $config['enable_syslog'] = 1; > > > $config['syslog_filter'] = array("last message repeated", > > > "Connection from > > > UDP: [", > > > "ipSystemStatsTable node > > > ipSystemStatsOutFragOKs not implemented", > > > "diskio.c: don't know how to > > > handle"); ## > > > Ignore some crappy stuff from SNMP daemon > > > > > > //Geocoding Configuration > > > > > > > > > // End config.php > > > > > > > > > > > > *Observium*0.14.8.5763 *Apache*2.2.22 (Ubuntu) > > *PHP*5.3.10-1ubuntu3.13 > > > *MySQL*5.5.38-0ubuntu0.12.04.1 *SNMP*NET-SNMP version: 5.4.3 > > > *RRDtool*1.4.7 > > >

3 3