- observium - lists.observium.org

Enhancement Request: Export Inventory to CSV
by techuser6＠gmail.com 09 Apr '14

09 Apr '14

It would be really nice if there was a way to export the Inventory to a CSV. This would greatly help with renewing maintenance and SmartNet Contracts for Cisco Devices.

1 0

Multiple Pollers Guidance
by Chip Pleasants 09 Apr '14

09 Apr '14

When there are multiple pollers via NFS how do they pick the devices to poll? Basically how to they not step all over each other polling the same nodes? I'm seeing snmp and ping alerts like 15 or so every hour come in that didn't come in when it was a single server solution. It does seem to be the same 20 or so devices. These particular devices do typically take around 60 sec to poll. Looking at devices that generated alerts their cpu, snmp response time, and ping time was all over the place. Meaning cpu doubled (10% to 20%), ping times went up to 200ms from 10ms, and snmp response time average when from 50ms to 556ms. I'm wondering if I was polling these devices multiple times within 5 minutes? Would this be related to NFS IO issues? I reverted back to a single solution for now. Any assistance is greatly appreciated. -Chip Config Sniplet $config['alerts']['email']['enable'] = TRUE; $config['poller-wrapper']['alerter'] = TRUE; $config['snmp']['timeout'] = 6; $config['snmp']['retries'] = 3; $config['snmp']['max-rep'] = 10; $config['fping'] = "/usr/sbin/fping -t2000";

3 5

Calculating availability
by Tom Henderson 08 Apr '14

08 Apr '14

Good morning list. Does anyone know if Observium is able to show the total uptime (or downtime) between two points in time? Is this be something the billing module can handle? Cheers Tom Henderson IT Manager | Pack & Company | 027 461 4403 | 09 929 2750 | tom(a)pack.co.nz -- ---------------------------------------------------------------------------If you are not the intended recipient of this email, you must not disclose, copy, or distribute any information contained in or attached to it, or take any action/inaction based on it. Please contact us immediately, and delete this email from your system. Any views or opinions presented in this email are solely those of the author and not of Pack & Company (NZ) Limited (the "Company"), however any intellectual property contained in or attached to this email is the property of the Company. Thank you.

1 0

Ubiquiti AirOS MIB
by Robbie Wright 08 Apr '14

08 Apr '14

UBNT has finally released their officially supported MIB's in their most recent release. I know a few folks are lurking on this list that would love to see those MIB's officially supported and a few of us more than happy to pay for said support in Observium. Todd/Adam/Mike, an interest in taking this on as a sponsored improvement? I can send you the MIB privately if you'd like a sneak peek. Robbie Wright Siuslaw Broadband <http://siuslawbroadband.com> 541-902-5101 **For support issues, please email support(a)siuslawbroadband.com.**

5 9

Remote SysLogging
by Marco Spicuglia 08 Apr '14

08 Apr '14

Hello there, it seems that I have some issues with remote syslogging. Some network devices work well, some others don't. The problem seems to be related to the Observium host, I think, as running syslog-ng -Fevd on my observium server, shows that log entries are coming in also from the devices that do not have any log entry in the GUI. It seems that syslog-ng gets the log entries, but they do not get properly passed to Observium, for some reason, at least for some devices. Therefore, those entries do not show up in the mysql database and thus neither in the GUI. I had this problem also on two other Observium hosts I have tried, but only since an upgrade I performed around October 2013. Before it was working fine for all those devices. Anything I can check/do for fixing this? Thanks in advance for your help. Best regards, Marco Met vriendelijke groet/ Kind regards, Marco Spicuglia Network engineer - Programmer ReasonNet B.V. Gyroscoopweg 134 - 140 1042AZ Amsterdam W. www.reasonnet.com E. Marco.Spicuglia(a)reasonnet.com T. F. ReasonNet zoekt datacenter support engineers. Ga voor deze en andere interessante vacatures binnen ReasonNet naar http://www.reasonnet.com/nieuws ReasonNet, shall not be liable for damages resulting from the use of electronic means of communication, including -but not limited to- damages resulting from failure or delay in delivery of electronic communications, interception or manipulation of electronic communications by third parties or by computer programs used for electronic communications and transmission of viruses and other malicious code.

3 4

Recalculate history usage data
by Jimmy Samuel García Hynds 08 Apr '14

08 Apr '14

Hello, >From time to time I have this huge spikes in the traffic bills that are abnormal, in those cases I just change those values to 0 in the database, I replace them in the bill_data table, and the charts return to normal, I do not mind losing 10 or 20 minutes of readings. This is my question, Is there a way to recalculate the historical data? That data is updated even if I delete the date in the bill_data table, and I do not want to screw up my installation. Best Regards. ________________________________ AVISO DE CONFIDENCIALIDAD: Este e-mail contiene informacion que es confidencial y solo puede ser utilizada por las personas o entidades a la cuales esta dirigida. Si usted no es el destinatario autorizado, cualquier modificacion, retension, difusion o copia total o parcial esta prohibida. CONFIDENTIALITY NOTICE: This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you are not the named addressee you should not disseminate, distribute or copy this e-mail.

1 0

Re: [Observium] How do I get linux boxes to show up in the inventory?
by Ricardo M Meleschi 07 Apr '14

07 Apr '14

Hello Adam, Thank you for your quick response back. Which table is used to populate the inventory section of observium? I’ll poke it a bit and see what I can do with it.. Thanks again, Ricardo > Adam Armstrong Mon, 07 Apr 2014 11:03:12 -0700 > > Hi, > > The inventory page is for cisco/juniper/extreme linecard and other components. It populates from a different table. > adam. > > On 2014-04-07 12:26, Ricardo M Meleschi wrote: > Hello again! > > I noticed there’s an inventory option for Observium. I’m wondering > if there’s a way to get the linux boxes that are being monitored by > observium into the inventory list? it’d be a nice way to keep track > of things, even if I need to make manual modifications to the > database. I’ve already added the serial #’s for the systems, and I > was hoping that would be enough for the inventory page on observium to > populate, but it wasn’t. > > Thanks, > Ricardo > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

How do I get linux boxes to show up in the inventory?
by Ricardo M Meleschi 07 Apr '14

07 Apr '14

Hello again! I noticed there’s an inventory option for Observium. I’m wondering if there’s a way to get the linux boxes that are being monitored by observium into the inventory list? it’d be a nice way to keep track of things, even if I need to make manual modifications to the database. I’ve already added the serial #’s for the systems, and I was hoping that would be enough for the inventory page on observium to populate, but it wasn’t. Thanks, Ricardo

2 1

Port Properties do not work
by Marco Zberg 07 Apr '14

07 Apr '14

Hi Currently I feel stuck with an quite ordinary process, disabling of polling and alerts. Normally (on another Observium instance) we deactivate all ports with ifOperStatus=down and ifAdminStatus=down via select/update statement directy in mysql. On our affected Observium instance we have plenty of ports we do not like to poll and keep them deactivated. We have Cisco Catalyst 4507 in use, which are equipped with 400 customer ports (downstream). It is unpractical to activate them all and would overload our Observium with too may SNMP requests. We manually keep the upstream ports (10G Ethernet, Port-Channel etc.) and some specific customer ports activated. When I toggle the ports manually (yes or no) or via "Toggle All" button, it says: "Device record unchanged. No update necessary". Effectively nothing has changed and the ports are still active which should be deactivated. This problem affects the "Polling" and "Alerts" function. Maybe there is a workaround possible via manual update in the mysql DB? Currently we use Rev. 5163. BR, Marco Zberg [cid:image003.png@01CF4A6C.51881570] [cid:image002.png@01CF4A6D.47CF91B0] besuchen sie unsere neue website unter www.arcade.ch<http://www.arcade.ch> ____________________________ [cid:image005.png@01CF4A70.69C95AF0] marco zberg teamleader whitelabel & ott marco.zberg(a)arcade.ch arcade solutions ag winkelriedstrasse 37 6003 luzern tel +41 41 417 31 73 www.arcade.ch cloud + connectivity + ict ____________________________

2 2

March changelog and new Community Edition release
by Adam Armstrong 07 Apr '14

07 Apr '14

Hi All, The new March changelog is available at http://www.observium.org/wiki/Changelog#March_2014 Since it's been 6 months since the last release, we've released a new Community Edition .tar.gz at http://www.observium.org/wiki/Download_Community_Edition Thanks, adam.

3 4