- observium - lists.observium.org

itsafeaturenotabug (was re: routing tab)
by Rob VanHooren 13 Jan '16

13 Jan '16

it’s not “broken” in the sense that CSCO officially considers multicontext snmp the “by-design” method (and I have the TAC cases to prove it). remember, snmp *works* which means it’s for grouchy old [grey|neck]beards. netconf & shiny-api-disaster-of-the-week are supposed to rule the new agile! world! of! devops! ( *gag* ) not just ASRs … for instance, it’s the same thing (multicontext snmp hell) with VRFs on n7k’s. so, it’s a “feature” not a “bug” smh R. > On Jan 13, 2016, at 07:00, observium-request(a)observium.org wrote: > > Because the MIB is broken and doesn?t have any concept of VRF awareness. > > The workaround that I used on my ASR9Ks was to create a different context for the VRF in question. > > This config example basically treats the vrf Inetv4 as the default vrf when polling with community blahpoo. It only applies to that community. I have non-contextual communities to catch my default stuff, i.e. my MP-BGP underpinnings. > > It?s not ideal because you need to create two of the same device in Observium; one for each community (vrf and non-vrf), but it sucks less than the alternative, which is to not have this functionality at all. > > ! > snmp-server vrf Inetv4 > context BGPVRF > ! > snmp-server context BGPVRF > snmp-server community-map blahpoo context BGPVRF > snmp-server community blahpoo RO MANAGEMENT > ! > > http://postman.memetic.org/pipermail/observium/2015-June/010467.html <http://postman.memetic.org/pipermail/observium/2015-June/010467.html>

3 2

95th percent billing
by ChanTy 13 Jan '16

13 Jan '16

Hi, I just want to clarify the burstable rate calculation which should work as below according to wikipedia (https://en.wikipedia.org/wiki/Burstable_billing#95th_percentile) : “ Bandwidth is measured (or sampled) from the switch or router and recorded in a log file. In most cases, this is done every 5 minutes. At the end of the month, the samples are sorted from highest to lowest, and the top 5% (which equal to approximately 36 hours of a 30-day billing cycle) of data is thrown away. The next highest measurement becomes the billable use for the entire month. “ Is observium applying the same calculation on BILLING feature ? Is it possible to download RAW file in which has sample of every 5 minutes ? Regards, chanty

2 1

Routing Tab
by Serghei Golipad 12 Jan '16

12 Jan '16

Guys, Any reason why BGP in a VRF peers are not getting displayed? Cheers PLEASE CONSIDER THE ENVIRONMENT BEFORE PRINTING THIS EMAIL. Kelway (UK) Ltd is a Company registered in England and Wales. This email is sent for and on behalf of Kelway Holdings Limited. Kelway Holdings Limited is the UK holding company for Kelway (UK) Limited trading as Kelway. The registered office for Kelway Holdings Limited (Company Number 05872067) and its UK group undertakings is 10 Fleet Place, London, EC4M 7RB. VAT Registration 902 1949 39. Confidentiality: This e-mail contains proprietary information, some or all of which may be confidential and/or legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail and then delete the original. If you are not the intended recipient you may not use, disclose, distribute, copy, print or rely on any information contained in this e-mail. You must not inform any other person other than Kelway or the sender of its existence. For more information about Kelway please visit www.kelway.co.uk

2 1

ALert on Vlan change
by David Schrok 12 Jan '16

12 Jan '16

Hello all. Is there a way, or can it be programmed, to get an alert when a port gets set on a particular Vlan or is moved out of it? Example: We have networks (vlans) where admins are put into. Is there a wat to get an alert when a port is set to an admin vlan or is set from an admin vlan to another vlan? With kind regards, David

1 0

Alert options of a device....................!
by Chaman Rathee 12 Jan '16

12 Jan '16

Hi Team, How to use and enable alert options for an added device ? I have already configured postfix service on observium monitor machine. ......... With Best Regards, Chaman Rathee Mob. No:- +91-9560055816 [Fabrikam] Privileged or confidential information may be contained in this message. If you are not the addressee indicated in this message (or responsible for delivery of the message to such person), please delete this message and kindly notify the sender by an emailed reply. Opinions, conclusions and other information in this message that do not relate to the official business of Progression and its associate entities shall be understood as neither given nor endorsed by them.

1 0

Not receiving email notifications. Has there been a change in Alert system I need to know about?
by Richard Kuhns 11 Jan '16

11 Jan '16

Hello, I recently updated my Observium installation; I'm now running 0.16.1.7473. I haven't changed any configurations. I followed procedure, as far as I know: polling was finished, I did the 'svn up' followed by './discovery.php -u' and everything looked fine. However, I should have just received an email both when a port I'm monitoring went down, and about half an hour later when it recovered. Looking through the alert log, I see the entries that say 'Alert notification sent' followed later by 'Recovery notification sent'. I didn't receive either notification, there's nothing in the mail queue, and maillog doesn't show any attempts. This was working perfectly before my update. I'm afraid I don't remember which version that was, but it was from about a week before I saw comments in the mailing list about the change in layout on the front page. Thanks, -- Richard Kuhns <rjk(a)wintek.com> Wintek Corporation 427 N 6th Street Lafayette, IN 47901-2211 Main: 765-742-8428 Direct: 765-269-8541

3 6

Info
by Gabriele Faucitano 11 Jan '16

11 Jan '16

Hi, We are currently evaluating Observium for a monitoring solution. I have some technical questions to understand if Observium is adequate to our needs. Is this the right contact? BR, -Gabriele

2 2

Reg: Maipu Switch Configuration with Observium
by Madhu Neal 11 Jan '16

11 Jan '16

Hi Guys, badly needed support to configure Maipu switch with Observium, tried many was I don't know how to add it.. Enabled SNMP in maipu device, find the maipu configuration below. snmp-server enable snmp-server view default 1.0.8802 include snmp-server view default 1.1.2 include snmp-server view default 1.3.111 include snmp-server view default 1.3.6.1 include snmp-server name skynetonline snmp-server contact alerts(a)skynetonline.solutions snmp-server location Adithya Tower snmp-server community public view default ro snmp-server enable traps alarm snmp-server enable traps snmp linkdown snmp-server enable traps snmp linkup I'm using Observium Subscription version, please suggest how to take it forward. I look forward to hear from you. //BR Madhu

2 1

Downgrade
by Andrew Colin 11 Jan '16

11 Jan '16

Hi All How do I downgrade to a previous version I am on the professional addition and I updated to the latest revision 7470. But now the layout is very messy and the top pages have moved to the left side How can I downgrade? Kind Regards Andrew Colin Converged Telecoms (Pty) Ltd. Licensed Telecoms Operator : (0258/IECS/JAN/09) (0258/IECNS/JAN/09) Switchboard: +27 (0)10 591 4600 Email: <mailto:andrew@convergedgroup.net> andrew(a)convergedgroup.net Web: <http://www.convergedtel.co.za/> http://www.convergedgroup.net 75 Witkoppen Road, Northriding, Johannesburg, 2169 P O Box 7246, Weltevredenpark, 1715 This communication is confidential and intended solely for the addressee(s). Any unauthorized review, use, disclosure or distribution is prohibited. If you believe this message has been sent to you in error, please notify the sender by replying to this transmission and delete the message without disclosing it. Thank you. E-mail including attachments is susceptible to data corruption, interception, unauthorized amendment, tampering and viruses, and we only send and receive emails on the basis that we are not liable for any such corruption, interception, amendment, tampering or viruses or any consequences thereof.

2 2

Feature request
by observium＠istar.net.nz 10 Jan '16

10 Jan '16

Just wondering how hard it would be to implement the following features, please le tme know if these already exist and I've just missed them! 1) Close window button on the hover popups. I think the pop ups are great but I find sometimes they don't disappear, a small X button on the top RH corner would be fantastic! 2) Adding AND and NOT to the Device/Entity filters It would be fantastic to have a little more flexibility in the filters used for Alerts and Groups etc. Would it be easy enough to be able to use AND and NOT statements? Thanks in advanced. SHANE lE <mailto:shanson@istar.net.nz> shanson(a)istar.net.nz lW <https://istar.net.nz/> istar.net.nz lA PO Box 911507, Victoria St West, Auckland lM +64 21 623 903

1 0