- observium - lists.observium.org

Aggregate graphs for Peering Ports
by Tim Calvin 22 Apr '14

22 Apr '14

I was curious if there was a way to group together Peering ports in a way that it shows an aggregate graph similar to how Customer ports are handled. On the customer ports page, I can see an aggregate graph of all a particular customers circuits. It seems all I have to do here is make sure they are named the same. We have a few peering circuits to one entity and it would be nice to have that same behavior. I have them named the same but on the peering page the two circuits are shown individually with no aggregate totals. Just wondering if there was some type of configurable option to enable this or not. Let me know if I need to provide anymore info. Hopefully that makes sense. Thanks, Tim Calvin Texas Lone Star Network

3 3

Frontpage Map Zoom
by Johnson, Edward A. 22 Apr '14

22 Apr '14

All of our devices are located within the state of Indiana. On the frontpage the map zooms from Utah to Nova Scotia with Indiana in the middle. Of course I can manually zoom in as far as I need but would like the default to zoom 1x more so I can see the entire state of indiana from north to south. Is there a setting in config.php that will let me do that?

2 2

Re: [Observium] Port 'Last Changed' visibility
by Jake Turner 22 Apr '14

22 Apr '14

After much debugging, tweaking the code and playing around with timestamp to epoch functions I’ve finally managed to get this working and it seems to be pretty accurate (for the Cisco devices at least). Thanks for your help Jake Turner [cid:94259173-8184-4F71-8163-56004829AE3C@turnerhouse.local] I am running 0.13.10 (rev. 4585) so yes, a pretty old version. I will update asap and that should shed a little more light (Y). Cheers Jake Turner On 19 Apr 2014, at 05:35, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: Are you running some horrifically old version? root@alpha:/home/observium/dev# wc -l includes/polling/ports.inc.php 719 includes/polling/ports.inc.php adam. On 2014-04-18 23:32, Jake Turner wrote: Weird, my /includes/polling/ports.inc.php file only has 617 lines. Cisco devices at least report the time that the system was up when the interface changed and I don’t mind having to calculate him many days/hours/minutes etc that was and then displaying that on the appropriate page. I see what you’re saying when it comes to providing the most compatibility with all the different vendors as they probably report it slightly different (or not at all) and so updating it with 'on update CURRENT_TIMESTAMP’ ensures that you’ll always have something there. I only have Cisco devices though so it’s not too much of a problem. Thanks, I’ll do some more digging tomorrow, need to sleep now! Jake Turner On 19 Apr 2014, at 05:10, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: Line 623 and below of includes/polling/ports.inc.php. This should use the port's ifLastChanged if it exists, else it'll use the current polling time. At some point we decided it was totally unrealiable and decided to track it ourselves by having the database update the value when the port configuration in the database changed. It sounds more like you'd want the "down since" number calculation changed to include the total time that the alert wasn't up (or unknown). adam. On 2014-04-18 22:58, Jake Turner wrote: Thank you for your reply. I take it from your response that there is some code that will update the ifLastChange field. Unfortunately I can not find it anywhere and as a desperate attempt to see if it were specified anywhere I performed a very dirty search: 'grep -r "ifLastChange" /etc/observium/‘ which yielded nothing of any significance. Sorry if you feel I’m being retarded but I simply can’t find it :/ Jake Turner On 19 Apr 2014, at 03:58, Adam Armstrong <adama(a)memetic.org<mailto:adama@memetic.org>> wrote: On 2014-04-18 21:34, Jake Turner wrote: Hmm, not sure what documentation is in the code, perhaps I was looking at the wrong files. It would appear however that the ifLastChange field is only changed whenever that particular record gets ‘updated’. The MySQL column has 'on update CURRENT_TIMESTAMP’ as it’s attribute. I’m thinking of removing that and creating a separate script to update this column with the interface change time as reported by the device. If you're not capable of finding where it's updated in the code, you possibly don't want to be modifying the code you can't be bothered to read. adam. _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium _______________________________________________ observium mailing list observium(a)observium.org<mailto:observium@observium.org> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

1 0

graphs for power usage on Tripplite PDUMH30ATNET
by Jeff Courtade 22 Apr '14

22 Apr '14

Hello, I have successfully added in a Tripplite PDUMH30ATNET. It successfully detects and uses the OPS mib when it sets up and has a nice little tripplite icon. The only thing it seems to be graphing is the Ethernet traffic on the one ethernet interface on the device. What I want to see graphs of are the power usage on each of the power outlets and inputs. Any help would be appreciated. -- Thanks, Jeff Courtade Director of Systems Engineering Adjuggler Inc http://www.adjuggler.com M: 240.507.6116

4 5

Re: [Observium] Ubiquiti AirOS MIB (Robbie Wright)
by Josh Reynolds 22 Apr '14

22 Apr '14

Robbie, Thanks for staying on top of this. We've been trying to scare up support on the UBNT forum for about 6 months now to get a large group of people to donate to the Observium project, but until it works... it's hard to get people to pay for it. *Josh Reynolds* Chief Information Officer SPITwSPOTS josh(a)spitwspots.com | www.spitwspots.com

5 6

Re: [Observium] Ubiquiti AirOS MIB (Robbie Wright) (Moore, Cameron)
by Josh Reynolds 22 Apr '14

22 Apr '14

The new MIB will only work on 5.6-beta and above. Or AirFiber v2.0+ -- Josh Reynolds : Chief Information Officer : SPITwSPOTS : josh(a)spitwspots.com On Mon, 2014-04-21 at 23:58 +0100, observium-request(a)observium.org wrote: > Re: Ubiquiti AirOS MIB (Robbie Wright) (Moore, Cameron)

1 0

Trying to update Commnuity edition...
by Boardman, Nick 21 Apr '14

21 Apr '14

Good afternoon, I am trying to update my Community version .4585 to the latest version listed on the Observium page of .5229 but it fails. I have installed the Subversion client using apt-get. The specific error message when attempting to upgrade is: Skipped '.' Any help would be appreciated. Nick Boardman MCSE, MCSA: Security, CCA, Security+ HRSD Systems Engineer

3 4

Map issue
by Johnathon Voegeli 19 Apr '14

19 Apr '14

Does anyone know how to fix this? All the SysLocation fields are identical, but when they go on the map it places 2 blips a few miles a part. This is on all of my locations. I suspect its an easy fix to blow that part of the database away and let it reload them. I believe it started happening when the map updated the last time. Using the subscription. ~JV [cid:36A15709-7D97-40E0-AEAC-EFDF91B3CCBC] CONFIDENTIALITY NOTICE: This e-mail message, and any documents, files, or previous e-mail messages attached to it, may contain information that is confidential, proprietary, and/or legally privileged. If the reader of this e-mail message is neither the intended recipient nor an employee or an agent responsible for delivering this e-mail message to the intended recipient, you are hereby notified that any unauthorized review, use, disclosure, reproduction, distribution or the taking of action in reliance on the contents of the information of this communication is prohibited. If you have received this communication in error, please notify the sender by replying to the e-mail message and delete it from your computer, without reading it or saving it in any manner.

1 0

Port 'Last Changed' visibility
by Jake Turner 19 Apr '14

19 Apr '14

Hi all, I can't seem to see this feature on the port details page or the 'all ports' list but forgive me if it is visible somewhere. It would be useful to have a 'last changed' time (30 mins ago) etc... on the port details page. This info can be gained from SNMP and from what I can see is already in the DB so it would just be a case of adding it to the page code. Thanks Jake

3 12

Re: [Observium] Observium] Brocade MLXe and ICX support / question
by Adam Armstrong 18 Apr '14

18 Apr '14

No such object is irrelevant, it is from another polled module. I'm not sure why it's discovering incorrectly, I will try to look tomorrow. Adam. "Swen Veckes (KDDI)" <s.veckes(a)de.kddi.com> wrote: OK, I’m not a programmer, so I can’t proof. But I have deleted the device „br00“ from observium and added it again. Now the result is the same as for the other device „mlx01“. So observium changed the way it calculates processor load. But why should this been changed? Any of the developers who can help me to understand, especially on the „No Such Object …“ messages which makes me think that Broke support does not work correctly for MLXe devices? Regards, Swen Am 17.04.2014 um 09:14 schrieb Swen Veckes (KDDI) <s.veckes(a)de.kddi.com>: > OK then. I have tried to further investigate my problem and run poller.php and discover.php in debug mode and got the following result for the processors: > > SQL[SELECT `processors`.*, `processors-state`.processor_usage, `processors-state`.processor_polled FROM `processors` LEFT JOIN `processors-state` ON `processors`.processor_id = `processors-state`.processor_id WHERE `device_id` = '88'] > Processor Slot 1 BR-MLX-10Gx8-X [1] DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpget -v2c -c '****' -O Uqnv -m "" -M /opt/observium/mibs 'udp':'ffm-th-mlx01':'161' .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.1.1.300 > 100 > > 100% > RRD[cmd[update /opt/observium/rrd/ffm-th-mlx01/processor-ironware-1.1.300.rrd N:100] > stdout[OK u:0.00 s:0.00 r:1.27] > stderr[]] > > SQL[UPDATE `processors-state` set `processor_usage` ='100',`processor_polled` ='1397716569' WHERE `processor_id` = '480'] > > > > SQL[SELECT `processors`.*, `processors-state`.processor_usage, `processors-state`.processor_polled FROM `processors` LEFT JOIN `processors-state` ON `processors`.processor_id = `processors-state`.processor_id WHERE `device_id` = '49'] > Processor Slot 1 BR-MLX-10Gx8-X [1] DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpget -v2c -c '****' -O Uqnv -m "" -M /opt/observium/mibs 'udp':'br00':'161' .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.1.1.300 > 100 > > 1% > RRD[cmd[update /opt/observium/rrd/br00/processor-ironware-1.1.300.rrd N:1] > stdout[OK u:0.00 s:0.00 r:0.90] > stderr[]] > > SQL[UPDATE `processors-state` set `processor_usage` ='1',`processor_polled` ='1397716171' WHERE `processor_id` = '160'] > > > > > DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpget -v2c -c '****' -Oqv -m FOUNDRY-SN-AGENT-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/foundry 'udp':'ffm-th-mlx01':'161' snAgentConfigModuleDescription.1 > "BR-MLX-10Gx8-X 8-port 10GbE (X) Module" > > 88 -> .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.1.1.300, 1.1.300, ironware, Slot 1 BR-MLX-10Gx8-X [1], 1, 100, , > > SQL[SELECT * FROM `processors` WHERE `device_id` = '88' AND `processor_index` = '1.1.300' AND `processor_type` = 'ironware'] > . hrDevice: DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpbulkwalk -v2c -c '****' -OQUs -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'ffm-th-mlx01':'161' hrDevice > hrDevice = No Such Object available on this agent at this OID > > DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpbulkwalk -v2c -c '****' -OQUs -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'ffm-th-mlx01':'161' hrProcessorLoad > hrProcessorLoad = No Such Object available on this agent at this OID > > > > DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpget -v2c -c '****' -Oqv -m FOUNDRY-SN-AGENT-MIB -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp:/opt/observium/mibs/foundry 'udp':'br00':'161' snAgentConfigModuleDescription.1 > "BR-MLX-10Gx8-X 8-port 10GbE (X) Module" > > 49 -> .1.3.6.1.4.1.1991.1.1.2.11.1.1.6.1.1.300, 1.1.300, ironware, Slot 1 BR-MLX-10Gx8-X [1], 1, 100, , > > SQL[SELECT * FROM `processors` WHERE `device_id` = '49' AND `processor_index` = '1.1.300' AND `processor_type` = 'ironware'] > . hrDevice: DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpbulkwalk -v2c -c '****' -OQUs -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'br00':'161' hrDevice > hrDevice = No Such Object available on this agent at this OID > > DEBUG: SNMP Auth options = -v2c -c '****' > /usr/bin/snmpbulkwalk -v2c -c '****' -OQUs -m HOST-RESOURCES-MIB:HOST-RESOURCES-TYPES -M /opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp 'udp':'br00':'161' hrProcessorLoad > hrProcessorLoad = No Such Object available on this agent at this OID > > > > Even the result of CPU load is the same for both devices, one is inserted to the database as 1% the other as 100%. Both queried OID’s are the same. Not sure about the „No such Object ….“ but that may be the problem!? > > > Regards > Swen > > > > > > > Am 16.04.2014 um 17:34 schrieb Raphael Maunier <raphael.maunier(a)gmail.com>: > >> Not sure, >> >> I will upgrade this observium later this month, but for now, I can’t :) >> >> I’ll let you know when this will be done, and I’ll update here >> >> Raphael >> >> On 16 Apr 2014, at 17:13, Swen Veckes <s.veckes(a)de.kddi.com> wrote: >> >>> Hi Raphael, >>> >>> thanks a lot for your answer. I tried downgrading to 5.4e and memory seems ok now, however, CPU is still 100%. Observium version is at v0.14.4.5323, as you are running a much older version that might make a difference!? >>> >>> Regards, >>> Swen >>> >>> >>> ----- Ursprüngliche Mail ----- >>> Von: "Raphael Maunier" <raphael.maunier(a)gmail.com> >>> An: "Observium Network Observation System" <observium(a)observium.org> >>> Gesendet: Dienstag, 15. April 2014 22:43:12 >>> Betreff: Re: [Observium] Brocade MLXe and ICX support / question >>> >>> >>> Hello Swen, >>> >>> >>> I have a couple MLX-8 MLX-16 running 5.4E and I don’t have this issue for Memory / cpu. >>> For your vlan issue, I can’t check it as our mlx are a full vpls fabric, so all the ports are seen in vlan1 ( even if the vpls vlan is 4 ) >>> >>> >>> There is plenty of bugs on Broke -aid , the most stable version we have in production is this one. >>> >>> >>> 5.4B is bugued on the lag( ask brocade about this internal ID : DEFECT000440912 ) , so the minimum version you have to use is 5.4C >>> >>> >>> Regarding the ICX, I tried them and … I removed them and I will forget them :) >>> >>> >>> Attached a capture of one MLX16. >>> >>> >>> This customer is running CE 0.13.10.4585 >>> >>> >>> Raphael >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On 15 Apr 2014, at 14:28, Swen Veckes (KDDI) < s.veckes(a)de.kddi.com > wrote: >>> >>> >>> >>> Does no one have a glue on this? >>> >>> >>> cheers >>> Swen >>> >>> >>> >>> Am 11.04.2014 um 11:14 schrieb Swen Veckes (KDDI) < s.veckes(a)de.kddi.com >: >>> >>> >>> >>> Hi, >>> >>> we use a couple of MLXe’s and ICX’s which seem fine at the first place running observium’s subscriber edition. However, a few part seems not working correctly: >>> >>> + MLXE’s >>> - Memory shown as -1 on the device main page and has no graphs „nan“ at all >>> - Memorypool usage graphs show -nan >>> - Observium recognizes the installed Line card CPU but report 100% CPU on another machine adder 3 month earlier it reports OK >>> - VLAN’s are reported fine, however, on the VLAN tab only untagged vlan1 (default vlan) has port associated with it, others are empt >>> >>> + ICX’s >>> - CPU reported 100% all time, but same switch installed earlier shows fine >>> - Compared to the MLXe it does not show LAG interfaces >>> >>> >>> Any hints on the the graphing which works for one device but another added later does not as well for the memory? I Don’t hink that observium suddenly broke the support for this, as it is still working for the other devices (exactly the same device). >>> >>> What do I need to provide to help fixing the other things such as the LAG display for the ICX or others and to get more current Brocade device support? >>> >>> >>> Cheers, >>> Swen >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> <observium_mlx8.PNG>_______________________________________________ >>> observium mailing list >>> observium(a)observium.org >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

2 1