- observium - lists.observium.org

Geocoding
by Scott Brawner 12 Feb '14

12 Feb '14

OK I'll admit I was goofing around, in config.php I changed the geocoding API setting from google to mapquest for like ten seconds. Most of my sites are now clumped in the island off Portugal now. I've tried editing the sysLocations and rediscovering/polling to no avail. Halp! Now what? Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

5 9

ifAlias Script replacement
by Sascha Schaal 12 Feb '14

12 Feb '14

2 1

MAC Accounting
by James Bensley 12 Feb '14

12 Feb '14

Hi All, I'm sure this was discussed a while back but I've searched the mailing list and can't find anything. Is MAC accounting still supported in Observium or is this feature present in the code but awaiting removal? If it is support how are people using it? I am testing on Cisco IOS devices and its not working very well for me. I have configure under a physical interface the following: ip accounting output-packets ip accounting mac-address input ip accounting mac-address output I have some juniper MX tin in the lab I can test. Is this feature supported on Juniper too, would one perhaps have to configure "mac-learn-enable" as per this document? http://www.juniper.net/techpubs/en_US/junos13.2/topics/usage-guidelines/int… Below are the results I am getting from a Cisco 2821 for example running c2800nm-adventerprisek9-mz.124-25f.bin; All MACs have no IP addresses: http://i.imgur.com/CMBPjHf.png If I switch to the graph view they are all blank: http://i.imgur.com/nlaRqar.png If I click on any graph I get a permissions error (my user account is in the admins group): http://i.imgur.com/NcwKy8O.png The Top10 is partially working, it seems to be missing a lot of data: http://i.imgur.com/NraRHVc.png I have the same results (most data is missing) on a Cisco 1841 running c1841-adventerprisek9-mz.124-25f.bin in our office. Many thanks, James.

2 6

SVN working but not working
by Scott Brawner 12 Feb '14

12 Feb '14

I finally got svn to work by proxying it through a server with actual internet access. I love how I have to make an end-run around the network guys so I can give them what they want. Hilarious. Anyway I did the svn co http://..... Blah blah and it seemed to work properly. Then I run discovery and get this. (poller does the same thing) ./discovery.php -h dc-m-sitelink svn: '/opt/observium' is not a working copy Observium v0.SVN.ERROR Discovery Do I need to wipe and reinstall? I'd prefer not to as I have ~50 hosts set up and everything is otherwise working well. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

5 8

Discovery stuck on updating
by Nitesh Mistry 12 Feb '14

12 Feb '14

When I run discovery.php -h none the update process is stuck at... Please help. bservium:/opt/observium# ./discovery.php -h none Observium v0.14.2.4966 Discovery -- Updating database/file schema 080 -> 081 ... (db) done. 081 -> 082 ... (db) (STUCK HERE) Thanks Nitesh

3 4

LDAP auth and permissions levels
by Scott Brawner 12 Feb '14

12 Feb '14

Hi all- I'm using level 10 for admins and that is working fine, however, with level 1 users they can log in but cannot see any devices or ports. Is there something else I need to set up inside the application? Using latest stable svn. Best regards, Scott Brawner IS Manager - Infrastructure Kratos Defense and Security Solutions, Inc. o. 843-308-2364 m. 843-814-3912 Description: cid:image002.jpg@01CBD278.0CADB410 For every complex problem, there is a solution that is simple, neat, and wrong. -- H. L. Mencken

4 4

No graphs linux
by Tamino Grentzius 11 Feb '14

11 Feb '14

Hi, I am new to observium and after having multiple deploys I discovered that it works mostly really well, but on my linux machines it seems I have an error with drawing the graphs for memory, cpu and that... Anyone got a tip where I should start (client/server side) I have no clue at this point :) My esxi works, my cisco works, but no linux... :| Cheers, Tamino

3 3

Api question
by Marc 11 Feb '14

11 Feb '14

Hi All, First off all observium rocks :) I'm using observium for the testing purpose the CE version and I want to test the api but i get no result back in de data login is succeeded. api.php?username=[me]&password=idonttell&module=inventory&device=71 And the result is {"login":{"success":{"code":"101","msg":"User authentification succeeded"}},"data":[]} And yes the device is pressent --SNIP-- rrdtool graph /tmp/t21fHtvFkNKxDMW5.png -g --alt-autoscale-max --rigid -E --start 1391802941 --end 139188934 --SNIP-- php version PHP 5.4.4-14+deb7u7 restclient from philsturgeon codeigniter 2.1.4 -- *Met vriendelijke groet,* Marc de Rooy Technische medewerker Datacenter Engineer Flexwebhosting/FXW DISCLAIMER De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, vragen wij u het volgende: gebruik de inhoud niet; informeer de afzender door het bericht te retourneren; en vernietig de inhoud. The information contained in this message may be confidential and is intended to be exclusively for the addressee. If you have received this message in error, please do not use the contents, inform us immediately and delete its content.

2 3

Scaling Observium with Rancid, Smokeping, and Syslog-ng
by Chip Pleasants 11 Feb '14

11 Feb '14

Anyone have suggestions or real world experiences they could share scaling Observium with Rancid, Smokeping, and Syslog-ng. I have about 1000 router/switches in my network that equate to about 30k of interfaces. Half the interfaces will probably be down, although I'm not sure that makes a difference. Basically I'm wondering if I should break out my tools to individual VMs and use something like NFS for Observium to be able to see Rancid,Smokeping, and Syslog-ng data. Feel free to shoot me a private note. I appreciate any feedback. -Chip

4 6

ad ldap config brings up a blank page
by Chip Pleasants 11 Feb '14

11 Feb '14

I'm hoping someone could provide a little assistance helping me debug this problem. I'm seeing a blank home page when I change the authentication type to ldap. As soon as I put it back to mysql the home page displays. I'm using a working ldap config currently be used on a Ubuntu 12.04. I'm attempting to migrate over to a corporate supported RHEL 6 box. I dont see anything any log file indicating an ldap issue or configuration. Here's my ldap config. SELinux is disabled. Any assistance is greatly appreciated. Thanks. -Chip // Authentication Model #Required LDAP Settings $config['auth_ldap_binddn'] = "CN=foo,OU=foo,OU=foo Users,OU=foo,DC=foo,DC=foo,DC=NET"; $config['auth_ldap_bindpw'] = "foo"; $config['auth_ldap_attr']['uid'] = "sAMAccountName"; $config['auth_ldap_attr']['uidNumber'] = "objectSid"; $config['auth_ldap_attr']['cn'] = "name"; $config['auth_ldap_objectclass'] = "person"; $config['auth_mechanism'] = "ldap"; $config['auth_ldap_version'] = 3; $config['auth_ldap_server'] = "foo-adc05.foo.net"; $config['auth_ldap_port'] = 389; $config['auth_ldap_starttls'] = "false"; #User Account $config['auth_ldap_prefix'] = "cn="; $config['auth_ldap_suffix'] = ",OU=foo,OU=foor Users,OU=foo,DC=foo,DC=foo,DC=NET"; $config['auth_ldap_group'] = "CN=foo,OU=foo,OU=E-mail foo,OU=foo Groups,OU=foo,DC=foo,DC=foo,DC=NET"; $config['auth_ldap_groupbase'] = "OU=foo,OU=E-mail foo,OU=foo Groups,OU=foo,DC=foo,DC=foo,DC=NET"; $config['auth_ldap_groupmembertype'] = "fulldn"; $config['auth_ldap_groupmemberattr'] = "member"; unset($config['auth_ldap_groups']); $config['auth_ldap_groups']['foo']['level'] = 10;

3 7