- observium - lists.observium.org

Storage size changes
by Luis Londoño 29 Jan '20

29 Jan '20

Hello, On our NAS devices, there are multiple entries where the storage size changes to 0 and then changes back to its original number. Is this something that can be changed? Or anybody know why it is doing that? I´m wondering if that is going to cause an issue if I enable an alert checker for disk size changes.

3 2

Re: [Observium] NetApp Storage FAS2552 - Interface Speed Change
by Mike Stupalov 28 Jan '20

28 Jan '20

Hi Basile, please try with latest revision (r10249). Issue should gone ;) Basile Bluntschli wrote on 28.01.2020 09:35: > Hi Make > > please see attached files. > As you can see from the screenshot the interface names get filled > wrong. As far as I can see in the debug. It would display the correct > Interface but it gets truncated. > > Thanks > Basile > > > > Am Di., 28. Jan. 2020 um 00:09 Uhr schrieb Mike Stupalov > <mike(a)observium.org <mailto:mike@observium.org>>: > > Hi Basile, > > you sent discovery debug, but this issue need to see poller debug. > > Please make this debug: > ./poller.php -d -m ports -h <device> > > Tnx. > > Basile Bluntschli via observium wrote on 27.01.2020 23:57: >> just sent to you via private reply >> >> Thanks! >> >> Am Mo., 27. Jan. 2020 um 19:59 Uhr schrieb Tom Laermans via >> observium <observium(a)observium.org <mailto:observium@observium.org>>: >> >> Probably better to ignore the -1 and consider ifHighSpeeed >> unreliable on that device? >> >> Debug output for the poller would definitely help! >> >> On 1/26/2020 6:44 PM, Adam Armstrong via observium wrote: >>> Is it always the same message? >>> >>> If so, I guess that database field can't contain -1 value. >>> >>> We can modify the schema for that, but it'd be useful to >>> know where the -1 is coming from. >>> >>> Adam. >>> >>> Sent from BlueMail <http://www.bluemail.me/r?b=15774> >>> On 26 Jan 2020, at 15:23, Basile Bluntschli via observium >>> <observium(a)observium.org <mailto:observium@observium.org>> >>> wrote: >>> >>> Hi All >>> >>> on our NetApp FAS2552 every polling interval the >>> interface speed changes: >>> Interface changed: [ifHighSpeed] '0' -> '-1' >>> >>> This happens at all polling intervals... >>> >>> Would a debug output help? >>> >>> Thanks >>> Basile >>> >>> >>> ------------------------------------------------------------------------ >>> >>> observium mailing list >>> observium(a)observium.org <mailto:observium@observium.org> >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >>> >>> >>> _______________________________________________ >>> observium mailing list >>> observium(a)observium.org <mailto:observium@observium.org> >>> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org <mailto:observium@observium.org> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org <mailto:observium@observium.org> >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > -- > Mike Stupalov > Observium Limited, http://observium.org > -- Mike Stupalov Observium Limited, http://observium.org

2 1

NetApp Storage FAS2552 - Interface Speed Change
by Basile Bluntschli 28 Jan '20

28 Jan '20

Hi All on our NetApp FAS2552 every polling interval the interface speed changes: Interface changed: [ifHighSpeed] '0' -> '-1' This happens at all polling intervals... Would a debug output help? Thanks Basile

4 4

Supermicro: Voltage scale unreliabe
by Torstein Eide 27 Jan '20

27 Jan '20

Hi For me the scale read by the supermicro voltage was unreliable, so i have change it to be 2 separately entries. Index: includes/definitions/mibs/supermicro.inc.php > =================================================================== > --- includes/definitions/mibs/supermicro.inc.php (revision 10173) > +++ includes/definitions/mibs/supermicro.inc.php (working copy) > @@ -29,6 +29,8 @@ > 'SUPERMICRO-HEALTH-MIB::smHealthMonitorName.1' => '/.+/' > ]; > > + > +// Tempeture and fanspeed > $config['mibs'][$mib]['sensor'][] = array( > 'table' => 'smHealthMonitorTable', > 'oid' => 'smHealthMonitorReading', > @@ -35,11 +37,12 @@ > 'oid_descr' => 'smHealthMonitorName', > 'descr_transform' => [ 'action' => 'ireplace', 'from' => [ > 'Temperature', 'Temp', 'Voltage', ' Fan Speed', ' Speed' ], 'to' => '' ], > 'oid_class' => 'smHealthMonitorType', > - 'map_class' => [ 0 => 'fanspeed', 1 => 'voltage', 2 => > 'temperature' ], > + 'map_class' => [ 0 => 'fanspeed', 2 => 'temperature' ], > // This table have unit oid smHealthMonitorDivisor, but it always 0 > 'oid_scale' => 'smHealthMonitorReadingUnit', > 'map_scale' => [ 'C' => 1, 'mV' => 0.001, 'RPM' => 1 ], > 'oid_num' => '.1.3.6.1.4.1.10876.2.1.1.1.1.4', > + 'min' => 0, > 'limit_scale' => 'scale', // limits scale same as main scale > 'oid_limit_high' => 'smHealthMonitorHighLimit', > 'oid_limit_low' => 'smHealthMonitorLowLimit', > @@ -47,6 +50,31 @@ > 'rename_rrd' => 'supermicro-%index%' > ); > > +// voltage > + > +$config['mibs'][$mib]['sensor'][] = array( > + 'table' => 'smHealthMonitorTable', > + 'oid' => 'smHealthMonitorReading', > + 'oid_descr' => 'smHealthMonitorName', > + 'descr_transform' => [ 'action' => 'ireplace', 'from' => [ > 'Temperature', 'Temp', 'Voltage', ' Fan Speed', ' Speed' ], 'to' => '' ], > + 'oid_class' => 'smHealthMonitorType', > + 'map_class' => [ 1 => 'voltage' ], > + // This table have unit oid smHealthMonitorDivisor, but it always 0 > + //'oid_scale' => 'smHealthMonitorReadingUnit', > + //'map_scale' => [ 'C' => 1, 'mV' => 0.001, 'RPM' => 1 ], > + 'limit_scale' => 'scale', // limits scale same as main scale > + 'scale' => 0.001, > + 'oid_num' => '.1.3.6.1.4.1.10876.2.1.1.1.1.4', > + 'min' => 0, > + 'max' => 250000, > + 'oid_limit_high' => 'smHealthMonitorHighLimit', > + 'oid_limit_low' => 'smHealthMonitorLowLimit', > + 'test' => [ 'field' => 'smHealthMonitorReadingUnit', > 'operator' => 'notin', 'value' => [ 'ThermalText', 'N/A' ] ], > + 'rename_rrd' => 'supermicro-%index%' > +); This fix the problem i had with scale changing for voltage. -- Torstein Eide Torsteine(a)gmail.com

2 3

Settings page for status?
by Torstein Eide 27 Jan '20

27 Jan '20

I the settings page we have option for "Ignore" and "Disable" for sensor, and in the database we have similar columns for status. Why is "section=status/" not a thing? -- Torstein Eide Torsteine(a)gmail.com

2 2

How to add support for status?
by Torstein Eide 27 Jan '20

27 Jan '20

Hi I like to add support for lcsStatusVcCllMngrLinesEntry, in LCOS-MIB. But i can't find any doc on how to add it. Can some point me to where i can read about what i need? I have found some example, like what is done in "apc.inc.php", but it does not contain any description. LcsStatusVcCllMngrLinesEntry ::= SEQUENCE { lcsStatusVcCllMngrLinesEntryIndex Integer32, lcsStatusVcCllMngrLinesEntryName DisplayString, lcsStatusVcCllMngrLinesEntryType INTEGER, lcsStatusVcCllMngrLinesEntryRegStatus INTEGER, lcsStatusVcCllMngrLinesEntryLineStatus INTEGER, lcsStatusVcCllMngrLinesEntryQuality INTEGER, lcsStatusVcCllMngrLinesEntryNumber DisplayString, lcsStatusVcCllMngrLinesEntryDomain DisplayString, lcsStatusVcCllMngrLinesEntryRegState INTEGER, lcsStatusVcCllMngrLinesEntryInccallrecv Integer32, lcsStatusVcCllMngrLinesEntryInccallansw Integer32, lcsStatusVcCllMngrLinesEntryInccallconn Integer32, lcsStatusVcCllMngrLinesEntryInccallfail Integer32, lcsStatusVcCllMngrLinesEntryOutcallattm Integer32, lcsStatusVcCllMngrLinesEntryOutcallansw Integer32, lcsStatusVcCllMngrLinesEntryOutcallconn Integer32, lcsStatusVcCllMngrLinesEntryOutcallfail Integer32, lcsStatusVcCllMngrLinesEntryRemoteIpAddress DisplayString } -- Torstein Eide Torsteine(a)gmail.com

3 6

Systemd files
by Torstein Eide 25 Jan '20

25 Jan '20

Hi I have made systemd files for Observium. This makes it simplare to log from poller or discovery. It also adds a Max runtime control. It should probably be a max runtime per device. https://github.com/Eideen/Observium-systemdfiles -- Torstein Eide Torsteine(a)gmail.com

4 5

Cisco IE1000 support
by Torstein Eide 24 Jan '20

24 Jan '20

Hi I have made model, mibs and os config for CIE1000 seire MIBS can be fond her: https://gofile.io/?c=HcnPNn config her: https://gist.github.com/Eideen/144d9b38f85042d77619f91985bd85b6 I was unable to get the status LED working. -- Torstein Eide Torsteine(a)gmail.com

3 8

Real Time port graphing not working when enabling SSL
by cody＠mail-server.cc 23 Jan '20

23 Jan '20

When i enable HTTPS on Apache2 vhost then the Real Time port graph stays blank - when i revert to HTTP it's working again. Checked with the stable, rolling and CE version - same behavior on all of them. Do i need to set something extra or does anyone else have the same issue? Thanks, cody

3 3

Blanks in graphs
by Thodoris Lakiotis 22 Jan '20

22 Jan '20

Hi I am facing blanks in my graphs. I fill like the polling time is taking longer than graphing time. Does anyone find a solution?? I mostly polling network devices? Kind Regards Theo

2 2