- observium - lists.observium.org

Need to create sensors and better support for Ubiquiti radio devices
by John Brown 26 Dec '14

26 Dec '14

I'm looking for help to improve the support of Ubiquiti microwave radio support in Observium. Mainly focused on the AirFiber 24 and AirFiber 5 products, along with the Rocket series. Would need the ability to alarm on RF Signal level changes (out side of acceptable range, etc). Same with receive Ether CRC on the radio's ether interface. Anyone interested in helping. There would some $$ avail.

1 0

Enable / Disable RANCID on a per device basis
by Nate Mellendorf 26 Dec '14

26 Dec '14

Hello everyone, I've implemented the RANCID integration feature, which has been working quite well over the past week. I'm very excited to have config diffs on the same page as the health of each device. It's little features like this that are allowing us to leverage Observium over other monitoring platforms. That said, I was curious about a related Observium feature request. Would it be possible to configure a RANCID on/off switch on the device settings page? Please allow me to clarify this further. When I run generate-rancid.php, It's going to generate a router.db for all of the devices listed within observium. While this is amazing and extremely useful, not all devices within Observium need to be added to this list. My idea is to add a switch that determines whether the device will be added to the router.db. That way, when our CRON job runs each night to update router.db, it only does so for the devices we know RANCID can log into. Again, this is just an idea I wanted to share. If you feel there is something I could do to get around this, please let me know. As of right now, I generate the new router.db myself and manually remove each device I know shouldn't be listed. Thanks in advance, Nate Mellendorf | Network Analyst | Netgain 720 West Saint Germain Street | St. Cloud | MN | 56301 Phone: 320.251.4700 x183 | 877.797.4700 x183 www.NetgainHosting.com<http://www.netgainhosting.com/> [cid:image002.png@01D02109.328DCB00] ________________________________ The information contained in this email message is for the designated recipient only and may be privileged, confidential, and protected from disclosure. If you have received this message in error, please notify the sender immediately and delete the original. Any dissemination, distribution, copying or other use of this message or any information contained within is strictly prohibited.

1 0

Many false positives
by John Brown 24 Dec '14

24 Dec '14

Hi I'm trying to troubleshoot the many false positives we are receiving from OB. The system will report a host as down, yet our legacy Nagios and out-of-band Pingdom do not show the host as down. It doesn't appear that OB records in the log what specifically is making OB think the host is down. I've increased the SNMP time out value to 3 seconds (which seems very long) and that has helped with some hosts, mostly Mikrotiks. But I doubt that our Juniper MX480's (which are lightly loaded) should need such long time frame to respond. How can I get OB to report what is the actual trigger for its "Host Down" alerts ?? Are there tweaks for performance monitoring / testing ?? Thank you in advance..

4 8

Trango Radios, wish list, support in Observium, $$
by John Brown 24 Dec '14

24 Dec '14

Hi, We are using lots of Trango microwave radios and would like to see better support for them in Observium. I'm willing to put a few $$ towards that integration and support....

1 0

set device for customer
by Simon Smith 24 Dec '14

24 Dec '14

Hi All, I have a feeling is more of a daft / random question, but ill ask it anyways Is it possible to set a list of devices for a customer in the customer view under the Ports menu? I can’t change the description of every single interface like described in here http://www.observium.org/wiki/Interface_Description_Parsing I would rather have a customer view of all there devices I understand i could create a user for the customer and assign those devices to that user, but thats not a view for myself as Admin the other issue i have is the Devices are assigned all over the place and not in one location either ? Regards Simon

1 0

recovering upload/download figures from dumped DB file
by Tshering DHENDUP 24 Dec '14

24 Dec '14

Dear Admin, Unfortunately, I forgot to take the backup of the rrd directory but I did take the backup of the dumped mysql. Is there a way/queries to get the upload/download figures from the database? Or is there a way like MRTG to get the graphs displayed by importing the dumped DB file to the new Observium system? Regards -- Tshering DHENDUP(MR) Systems DrukNet (Internet, Data & Enterprise Services) Bhutan Telecom www.bt.bt

2 2

Windows MIBS
by Darian Jimenez 24 Dec '14

24 Dec '14

are all windows MIBs loaded in observium? Can i add more if they are not there? I would like to see services on windows machine, is this possible at all?

2 1

growl? Re: sms
by Rob VanHooren 23 Dec '14

23 Dec '14

a while back (mailinglist archive search), there was someone who used the observium API to get alerts into a growl listener, which would dump it e.g. into prowl on ios or android device. maybe growl can get it into sms too. Typogaphical errors courtesy of iPad > On Dec 23, 2014, at 4:53 PM, observium-request(a)observium.org wrote: > > SMS gateway

1 0

Unable to update polling/alerts toggles
by Travis Kreikemeier 23 Dec '14

23 Dec '14

Large 3750 switch stack, unable to update polling/alerts toggles in Observium. Seems to only update the first 333 ports. Been an issue for a while. Observium 0.14.12.6098 (stable) If you toggle just one of those high ports by itself, you get this message "Device record unchanged. No update necessary." If you toggle it with some lower ports, the lower ports will update by not the very high ports. Thanks TRAVIS KREIKEMEIER

2 2

Re: [Observium] Alert by sms
by Welisson Tomé 23 Dec '14

23 Dec '14

Hi Xavier, >Hi, > >Doing a SMS gateway with perl or gnokii is really easy. Even Gnokii can have a look in a SQL database to get the data to send to sms. I don't know the project gnokii, i will to research more about it, but i don't have idea how to do it be integrated with Observium and the alert be sending at exactly moment that there is a problem with some device. >The main problem is "IP SMS" gateway there is on the network. I understand observium team, and really using plain SMTP with >small messages can be better to be done than adding an extra code. So, i understand about this main problem, but, not is necessary there is an "IP SMS" on the network, because with a modem 3G/4G, we can send sms using the tool gsmssender [¹], together with nagios[²], [¹]http://manpages.ubuntu.com/manpages/natty/man8/gsmsendsms.8.html [²]https://securfox.wordpress.com/2009/03/30/how-to-configure-nagios-to-send… Regards -- Welisson Tomé br.linkedin.com/in/welissontome/

1 0