- observium - lists.observium.org

No storage graphs and storage module keeps switching to disabled
by Richard Boezerooij 12 Nov '14

12 Nov '14

Hello, Several (virtual) servers (Windows 2008 R2) do not show the storage graphs in Observium. On these servers the poller module keeps switching to disabled. The amount of storage used do show up on these servers. Other servers, same configuration, do show the storage graphs. On these servers the storage poller module do stay enabled. I've checked and restarted the SNMP service locally on these servers. I've updated CorreLog (syslog agent) on the servers to the latest version. Observium is installed on a Ubuntu server. I've updated Observium to 0.14.11.5963. How can I fix this problem? Kind regards, Richard De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt, wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door dit bericht te retourneren. Aan de inhoud van deze e-mail kunnen geen rechten worden ontleend. Incassade staat niet in voor de juistheid en volledigheid van dit e-mailbericht. Niet gegarandeerd kan worden dat dit bericht vrij is van virussen noch dat dit bij de geadresseerde is overgekomen zonder inbreuk of tussenkomst van onbevoegde derden.

2 1

s/MySQL/MariaDB/ ?
by Xavier Beaudouin 12 Nov '14

12 Nov '14

Hi, I have tried some times ago to change the MySQL server into MariaDB on my Observium server (community), but it seems that is breaking some parts of Observium and doesn't seems to update things. Anybody here have a good experience about moving MySQL to MariaDB with observium ? Regards, Xavier -- Xavier Beaudouin - Senior Network and System Administrator Infrastructure and network director Horizon Software - http://www.hsoftware.com/ 13 rue La Fayette - 75009 PARIS - France Phone: +33 (0)1 4260 9490 Fax: +33 (0)1 44 56 97 01

5 5

Re: [Observium] san
by Rob VanHooren 12 Nov '14

12 Nov '14

josh> I have mine on EMC. Does just fine. ditto (iSCSI). VAAI ESXi 55u2 vm's too; noop kernel elevator and etc other tweaks for the guests. one on a Nimble (cached with violin), and another on a QNAP (cached with slc ssd). bonded dual 10gigE +8k jumbo though. probably makes a big difference vs. 2 or 4G FC back-ended with creaky legacy FCAL spinners. ymmv. depends *highly* upon how well the environment is built for i/o ... which is likely why Adam has the wisdom to be wary & prefers DAS on a physical host. Typogaphical errors courtesy of iPhone > On Nov 11, 2014, at 17:45, observium-request(a)observium.org wrote: > > I have mine on an EMC. Does just fine.

2 1

mysql listed in modules when should be wmi
by Simon Smith 11 Nov '14

11 Nov '14

Hi All not sure if this is a bug ive found or simple me being dumb! ive just enabled a 2008r2 server with WMI to monitor it abit more… and ive noticed in the Timing panel of the device its listed the module mssql ? the mssql wasn’t listed before i enabled the WMI module for the device? shouldn’t it read WMI ? ive attached a screenshot showing what i mean Regards Simon

1 0

Interface Uptime as a Percentage
by Bruce Guthrie 11 Nov '14

11 Nov '14

Hi, With the information Observium currently collects is it possible to obtain the percentage uptime of a given interface for a day, a week, a month? Thanks and regards, Bruce

1 0

Rancid SVN integration makes apache2 crash
by Ole Hansen 11 Nov '14

11 Nov '14

Hi, We're using Observium Subscription-version on a Ubuntu 14.04 LTS server. I've configured the Rancid-integration and the basic "show configuration" works, but as soon as i click the button for a previous version Apache restarts with: [Mon Nov 10 10:33:09.544998 2014] [core:notice] [pid 1327] AH00051: child pid 1337 exit signal Segmentation fault (11), possible coredump in /tmp/dump I've configured apache to core dump into /tmp/dump and gdb tells me: Core was generated by `/usr/sbin/apache2 -k start'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00007f82cbbf0398 in is_numeric_string_ex (allow_errors=-1, oflow_info=0x0, dval=<synthetic pointer>, lval=0x1, length=<optimized out>, str=0x7f82c198cf38 "164") at /build/buildd/php5-5.5.9+dfsg/Zend/zend_operators.h:255 255 /build/buildd/php5-5.5.9+dfsg/Zend/zend_operators.h: No such file or directory. I'm suspecting some svn permissions or likewise, but my www-data user (which runs apache) is a member of the rancid group and should have permission to read the files. Any clues where to look? -- Ole Hansen

3 7

unscribe
by Pierre Menard 11 Nov '14

11 Nov '14

Please remove me from mailing list Regards, [Description: http://webmail.chipworks.com/Chipworks-logo.gif] Pierre Menard, Logistics, Parts Procurement T: 613.829.0414 x4072 1891 Robertson Rd. Suite 500, Ottawa, ON K2H 5B7 Canada www.chipworks.com<http://www.chipworks.com/> | Blog<http://www.chipworks.com/en/technical-competitive-analysis/resources/blog> | Twitter<https://twitter.com/Chipworks> | LinkedIn<http://www.linkedin.com/company/chipworks> PATENT AND TECHNOLOGY PARTNER TO THE WORLD'S MOST SUCCESSFUL COMPANIES This e-mail message may contain client privileged and/or confidential information, and is intended only for the use of the individual or entity named above. Any unauthorized use, dissemination or copying is strictly prohibited. If you have received this communication in error, please notify us immediately by reply e-mail and delete or discard this message.

6 5

Configuring E-mail Alert Settings
by Jacob Chavez 11 Nov '14

11 Nov '14

Hello, which file should I edit to configure and enable e-mail notifications for when a device is down? I need assistance configuring the mail backend settings and the alert itself. I was working on config.php, but haven't had success with messages being sent while a device is offline. Below is what I have thus far. // Set up a default alerter (email to a single address) $config['alerts']['alerter']['default']['descr'] = "Default Email Alert"; $config['alerts']['alerter']['default']['type'] = "email"; $config['alerts']['alerter']['default']['contact'] = "you(a)yourdomain.org"; $config['poller-wrapper']['alerter'] = TRUE; $config['alerts']['interval'] = 86400; $config['alerts']['bgp']['whitelist'] = NULL; $config['uptime_warning'] ="84600"; $config['email']['enable'] = TRUE; $config['email']['from'] = NULL; $config['email']['default'] = "XXXXX(a)XXXX.com"; $config['email']['default_only'] = FALSE; $config['email']['backend'] = 'mail'; $config['email']['sendmail_path'] = '/usr/sbin/sendmail'; $config['alerts']['alerter']['default']['enable'] = TRUE; $config['alerts']['email']['from'] = "Observium <XXXX(a)XXXXX.com>"; $config['email']['smtp_host'] = 'localhost'; $config['email']['smtp_port'] = 25; $config['email']['smtp_timeout'] = 10; $config['email']['smtp_secure'] = NULL; $config['email']['smtp_auth'] = FALSE; $config['email']['smtp_username'] = NULL; $config['email']['smtp_password'] = NULL; // End config.php Thanks! -- *Jacob Chavez - IT Support Technician Traffic Management, Inc. * *Toll Free: *800-763-3999 *Direct: *562-264-2275 *Mobile: *562-537-6205 *Fax: *562-424-0266 www.trafficmanagement.com California - Great Lakes - San Jose California License # 785804, Class C31 - Traffic Control Services - Sales and Rentals - Permits and Consulting - Engineering - Training

2 1

Syslogging & Expansion
by Lane Eckley 11 Nov '14

11 Nov '14

Hi Everyone, We are considering the possibility of using Observium's syslog capability to handle the syslog output of 50 machines which will be spitting out roughly 300K lines of log per hour for a grand total in the ball park 360,000,000 log entries per 24 hours. Has anyone used/attempted to handle this volume of logging with Observium in the past? If so, would you mind sharing your experience? I am also looking for feedback on hardware suggestions for both the Observium machine as well for the standalone database server. Any feedback is appreciated! Thanks, -Lane

5 6

Newbie... Cambium PTP wireless sorta contribution
by Ron Marosko 08 Nov '14

08 Nov '14

Greetings, New to the product, new to the list, trying it out to see if this will work for us. and I like what I see so far. I note with glee the upcoming support of the Cambium Canopy products with the patch filed under OBSERVIUM-1055, but also see that it's only for the PMP product line. Now it's important to note I'm a network engineer, not a coder, so I'm not sure how to go about some of the more (heck, even the lesser!) intricate details of PHP programming. I've been able to make it as far as the following for the os.inc.php include, but submission of same for the project. I have no idea how to go about doing, and again I'll point back to not being someone who knows how to write code. Just for testing sake, I put the following stuff into my own installation and tested, the discovery php is properly discovering/classifying the devices, and the poller phps being called are fetching the proper information from the devices. Thus, I submit for further determination for the os.inc.php: // Cambium PTP800 $os = "ptp800"; $config['os'][$os]['text'] = "Cambium PTP800"; $config['os'][$os]['type'] = "wireless"; $config['os'][$os]['icon'] = "cambium"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.17713.8"; $config['os'][$os]['mibs'][] = "CAMBIUM-PTP800-V2-MIB"; // Cambium PTP400/600 $os = "ptp400"; $config['os'][$os]['text'] = "Cambium PTP400/600"; $config['os'][$os]['type'] = "wireless"; $config['os'][$os]['icon'] = "cambium"; $config['os'][$os]['sysObjectID'][] = ".1.3.6.1.4.1.17713.1"; $config['os'][$os]['mibs'][] = "MOTOROLA-PTP-MIB"; For the polling/os part, I submit: ptp800.inc.php $version = trim(snmp_get($device, "CAMBIUM-PTP800-MIB::softwareVersion.0", "-OQv"),'"'); $hardware = trim(snmp_get($device, "CAMBIUM-PTP800-MIB::productName.0", "-OQv"),'"'); $serial = trim(snmp_get($device, "CAMBIUM-PTP800-MIB::rFUSerial.0", "-OQv"),'"'); ptp400.inc.php $version = trim(snmp_get($device, "MOTOROLA-PTP-MIB::softwareVersion.0", "-OQv"),'"'); $hardware = trim(snmp_get($device, "MOTOROLA-PTP-MIB::productName.0", "-OQv"),'"'); Now there are a lot of other pollable items in the MIBs, but I have no idea how to integrate any graphs or anything like that... I was looking (or trying to look at) the canopy.inc.php that is part of the -1055 patch, but it looks like a lot of gobbledygook to me.. just like Cisco router/switch configs may look to some of ya'll. Thus, if anyone can help with the PHP side of the stuff, I can handle the networking side. Regards, Ron -- Ron Marosko, Jr. . . . . . . . . . . . . . . . . . . . . . . . . . . CCIE No. 4526 (R/S), NN5DX Senior Network Engineer DirectBytes, LLC. 1108 West Dickinson Blvd, Suite A Fort Stockton, TX 79735 USA o: +1 432 336 5600 x115 c: +1 432 290 6344 e: ron(a)rjr-services.com pgp pubkey: <http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x778B3B0258AB8B5C> 0x58AB8B5C "To know me is to fly with me."

4 6