- observium - lists.observium.org

Subgroups under Custom OIDs just like Devices -> Locations
by Silvio del Val Hinojal 31 Aug '18

31 Aug '18

Hello, Would it be very difficult to have subgroups under "Custom OIDs" menu so that I would navigate in web to Home -> Custom OIDs -> <Group of Custom OIDs> -> Custom OIDs ? I don't know if have explained correctly. I only would like to organize my Custom OIDs in groups in menu bar in the web, just like "Devices -> Locations" do, that there are one subgroup for each location. If it's a lot of work for an small improvement, forget about it. I currently group my Custom OIDs by name. Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

1 0

Localization
by Luca Sasdelli 30 Aug '18

30 Aug '18

Hi, our customers are almost all non-english speaking, therefore I'd like to offer them a localized interface. is it planned some localization for Observium? Could we contribute in some way to italian translation? Best Luca

4 4

HP Procurve - dot1q and OSFP
by Christian Eriksson 29 Aug '18

29 Aug '18

Hi, 1. dot1Q All interfaces whether they be untagged or tagged, are marked as dot1q in the UI I have attached a debug of a device from the modules "ports" and "vlan"(debug.txt). Also a show vlan <id>(showvlan.txt) to prove that they really are untagged ;) 1. OSPF A lot of devices with no OSPF configuration have a routing button with OSPF in the UI(see attached file OSPF.png). Debug file is also attached(ospf_debug.txt) Output from show command [cid:image001.png@01D43FC7.747651A0] If you think I should open a JIRA case instead, i'll do it Running 18.8.9405 Regards Christian

1 0

Location mass edit
by Luca Sasdelli 29 Aug '18

29 Aug '18

Hi all, should I change the location of a whole 42U-rack equipments to a new one, does it exist any tool to do it in a single-shot? Or should I operate on the db? (or to uniquely name the racks, but this is another affair) Thanks Luca

3 4

ifIndex IPv4 addresses
by Christian Eriksson 29 Aug '18

29 Aug '18

Hi, I think this used to work before? IPv4 address tab doesn't show the interface name anymore, but instead ifIndex value. Under details I can see the ifName and IPv4 address correlation Running 18.8.9403 Vänliga hälsningar / Best regards, [Advania_Trappa_CMYK] Christian Eriksson System Consultant [cid:image003.png@01D43F94.18030DB0]<mailto:christian.eriksson@advania.se>[Advania-Bikupa Facebook]<https://www.facebook.com/advania.se/>[Advania-Bikupa LinkedIn]<https://www.linkedin.com/company/advania-ab/>[Advania-Bikupa Twitter]<https://twitter.com/advania_se> +4641090488<tel:+4641090488> | +46761400400<tel:+46761400400> www.advania.se<http://www.advania.se/> | Stockholm<https://www.google.se/maps/place/Advania+Sverige+AB/@59.3062176,18.0278762,…>

3 5

ifindex instead of ports
by Tomasz Karczewski 29 Aug '18

29 Aug '18

I noticed that i see ifindex instead of ports in ip address search page. When i manually discovered devices i see logs: Invalid arguments passed into function get_port_by_index_cache(). Please report to developers. So i'm reporting. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie

2 1

Polling times grew a lot upgrading to 18.8.9403 from 18.7.9337
by Silvio del Val Hinojal 29 Aug '18

29 Aug '18

Hello, This morning I upgraded our Observium Pro machines from prior version 18.7.9337 to last 18.8.9403 and, since then, polling times growed by almost 3 or 4 times: [cid:image003.jpg@01D43ED6.AFE37570] I upgraded using "svn update" in our polling machines and "discovery.php -u" to upgrade DB schema. I even tried to activate "$config['snmp']['max-rep'] = TRUE;" with no luck. What should I change to fix this times? Regards, Silvio [cid:image001.png@01D03B1C.E8E96F80]<http://www.pandasecurity.com/spain/> Silvio del Val Systems Engineer - Panda Security +34 944 343 728 silvio.delval(a)pandasecurity.com<mailto:silvio.delval@pandasecurity.com> pandasecurity.com<http://www.pandasecurity.com/> This e-mail contains confidential information owned by Panda Security. Any such copy, or use, or distribution or disclosure of its contents is strictly forbidden. Please notify us immediately at our phone number (+34 94 425 11 00) if you receive this e-mail and are not its consignee, and then delete this message from your system without copying it, distributing it, or disclosing its contents P Before printing this message, please make sure it is really necessary

5 7

Get more information on Dashboard for Process consumption
by Kaustubh Parthasarthy, CLSA 29 Aug '18

29 Aug '18

I have been using observium for few months now. I wanted some info from the graphs that observium spins off. Following is the graphs for running process consumption: [cid:image001.png@01D43EAC.03C3D610] Can I get something like top 10 process graphs? Let me give you an example, I sometimes get requests from folks asking, "Ok my memory utilization on a server ABC was 90% on this particular day. Can we get list of processes consuming high memory on that particular day ? " So as per this, can I customize the graph to get process level info ? Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

6 17

Observium Database
by Kaustubh Parthasarthy, CLSA 29 Aug '18

29 Aug '18

Hi Team, I have implemented observium in my environment. I wanted to look at some background scripts etc which gets the performance data like CPU, memory etc. For that I like to check the MYSQL database. Can someone please guide me if there is a way I can get access to the DB and have a look and also where the scripts are stored ? Regards Kaustubh Kaustubh Parthasarthy Analyst, Production Management Group D +91 20 6646 8625 | M +91 989 284 4625 | T +91 20 6646 8888 4/F, C-Wing, Panchshil Tech Park-1, Yerawada, Pune 411006, India [:1. Social Media Icons:CLSA_Social Media Icons_linkedin.png]<https://hk.linkedin.com/company/clsa>[:1. Social Media Icons:CLSA_Social Media Icons_twitter.png]<https://twitter.com/clsainsights?lang=en>[:1. Social Media Icons:CLSA_Social Media Icons_youtube.png]<https://www.youtube.com/channel/UC0qWp_lLnOcRYmBlCNQgZKA>[:1. Social Media Icons:CLSA_Social Media Icons_facebook.png]<https://www.facebook.com/clsacommunity/> clsa.com<https://www.clsa.com/> Insights. Liquidity. Capital. [CLSA_RGB]<https://www.clsa.com/member> A CITIC Securities Company The content of this communication is intended for the recipient and is subject to CLSA Legal and Regulatory Notices. These can be viewed at https://www.clsa.com/disclaimer.html or sent to you upon request. Please consider before printing. CLSA is ISO14001 certified and committed to reducing its impact on the environment.

3 3

Dashboards
by Cederlund Tobias 27 Aug '18

27 Aug '18

Hi (...threw the to the list yesterday, but it didn't came through...) A few months ago I noticed the appearance of a "Default Dashboard" under Overview in the menu. There's also a nice "Add to Dashboard" button on graph-pages to add the graph to a dashboard. This seems like a fantastic feature but right now there only the "Default Dashboard". Is it possible add more dashboards? ...and if so, how? I also haven't seen any documentation of this very nice feature. Is there any? We're on 18.8.9355 Best regards, Tobias

4 4