- observium - lists.observium.org

professional edition and supported distributions?
by Pablo Escobar Lopez 12 Sep '14

12 Sep '14

Hi, We have been testing observium and now we are considering the possibility to upgrade to the professional version. Is CentOS supported under the professional license or should we stay using ubuntu or debian? thanks for your help. Pablo. -- Pablo Escobar López HPC systems engineer Biozentrum, University of Basel Swiss Institute of Bioinformatics SIB Email: pablo.escobarlopez(a)unibas.ch Phone: +41 61 267 15 82 http://www.biozentrum.unibas.ch

2 1

keepalived
by Stefan 12 Sep '14

12 Sep '14

1 0

June Changelog
by Adam Armstrong 12 Sep '14

12 Sep '14

Hi Guys, June Changelog! http://www.observium.org/wiki/Changelog#June_2014 Mike was away last month, and it shows. No Rusglish! :D Thanks, adam.

8 37

Manually edit the port name / description
by Anthony Polselli 12 Sep '14

12 Sep '14

We have a Zyxel DSLAM ADSL switch and Observium is polling fine, but it doesn't pull the customer name field. Is there a way (if I can figure out the OID) to add that to the polling or manual set a description for each ADSL port? [cid:image001.jpg@01CFCDA3.30938010] __________________________________________ Anthony Polselli, Chief Technology Officer Natural Networks, Inc. 10225 Barnes Canyon Rd. Suite A105 San Diego, CA 92121 anthony(a)naturalnetworks.com<mailto:anthony@naturalnetworks.com> http://www.naturalnetworks.com<http://www.naturalnetworks.com/> (619) 222-3232 office (858) 202-0301 fax

2 1

Real time graphs resets much before
by Arya, Renuka [BSD] - MED 12 Sep '14

12 Sep '14

Hi Team, I was doing some "real time graphs" for interfaces on one of our switch devices. I ran the tests for 15 seconds of Polling interval. The page says the "graph shows last 3600 (60 mins)" but it seems they get resets in 4-5 mins and restarts itself. Has anyone see anything similar before? Version of Observium : CE 14.4.5229 Thanks! Regards Renuka ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

2 1

Re: [Observium] observium Digest, Vol 50, Issue 45
by Dudu 11 Sep '14

11 Sep '14

Hi All. Thank you for the reply. I do agree that this information is not published via snmp. Maybe it will be the first system to use telnet or ssh and do some text parsing. Its also a lot more reliable. That can be a great thing. Thanks again David. Sent from my Samsung Galaxy smartphone. -------- Original message -------- From: observium-request(a)observium.org Date:11/09/2014 19:32 (GMT+02:00) To: observium(a)observium.org Cc: Subject: observium Digest, Vol 50, Issue 45 Send observium mailing list submissions to observium(a)observium.org To subscribe or unsubscribe via the World Wide Web, visit http://postman.memetic.org/cgi-bin/mailman/listinfo/observium or, via email, send a message with subject or body 'help' to observium-request(a)observium.org You can reach the person managing the list at observium-owner(a)observium.org When replying, please edit your Subject line so it is more specific than "Re: Contents of observium digest..." Today's Topics: 1. Re: Maybe I got it Wrong. (Spencer Gaw) 2. Re: Maybe I got it Wrong. (Tristan Rhodes) 3. Re: Maybe I got it Wrong. (Tristan Rhodes) 4. Manually edit the port name / description (Anthony Polselli) ---------------------------------------------------------------------- Message: 1 Date: Thu, 11 Sep 2014 08:18:54 -0600 From: Spencer Gaw <spencerg(a)frii.net> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Maybe I got it Wrong. Message-ID: <5411AF4E.7080506(a)frii.net> Content-Type: text/plain; charset=windows-1252; format=flowed You might want to read up on SNMP and how it operates. Observium does not run commands on any device - it merely reports the data it gathers via SNMP. Regards, SG On 9/11/2014 4:31 AM, Dudu wrote: > Hi All, > I'm new here and I'm not sure about the port view. I can see the > neighbours and computers on the vlan on right side , the command looks > like show ip arp > > Maybe it's better to map the computer to the port itself? sh mac > address-table > > So out of the box we will know which server is connected to which > port. That could help to find VM's as well. > > Many Thanks > David. > > > > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium ------------------------------ Message: 2 Date: Thu, 11 Sep 2014 10:06:18 -0600 From: Tristan Rhodes <tristanrhodes(a)weber.edu> To: Observium Network Observation System <observium(a)observium.org> Subject: Re: [Observium] Maybe I got it Wrong. Message-ID: <CALeA1nfH+R-g7JdeQ4UD9nbtv6cN87-1UVDhcxSAveJ4WHC3ZQ(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" David, I think you had the same confusion as me, regarding how to find MAC addresses of nodes (computers). 1) Start by clicking on the name of a device. (You can search for it on the top right) 2) Click on the "Ports" tab. 3) If this is a router, there will be a tab called "ARP/NDP Table", this is IPv4 and IPv6 mapping of MAC address to IP address. If this device was only a layer-2 switch, then this tab would not be displayed. 4) There is a tab called "FDB Table", this is the mapping of MAC address to switchport. (I have always called this the CAM table). Due to the functionality of broadcasts, this will show every device in the same VLAN (the MAC address is seen on switch uplinks) However, I wish there was a node lookup tool that showed which switchport a computer was plugged into. We should be able to identify the interface closest to the computer by removing all interfaces that are CDP/LLDP neighbors with another known network device. Does this make sense? Cheers, Tristan *Tristan Rhodes* Network Engineer Weber State University 801.626.8549 On Thu, Sep 11, 2014 at 8:18 AM, Spencer Gaw <spencerg(a)frii.net> wrote: > You might want to read up on SNMP and how it operates. Observium does not > run commands on any device - it merely reports the data it gathers via SNMP. > > Regards, > > SG > > > On 9/11/2014 4:31 AM, Dudu wrote: > >> Hi All, >> I'm new here and I'm not sure about the port view. I can see the >> neighbours and computers on the vlan on right side , the command looks like >> show ip arp >> >> Maybe it's better to map the computer to the port itself? sh mac >> address-table >> >> So out of the box we will know which server is connected to which port. >> That could help to find VM's as well. >> >> Many Thanks >> David. >> >> >> >> >> _______________________________________________ >> observium mailing list >> observium(a)observium.org >> http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >> > > _______________________________________________ > observium mailing list > observium(a)observium.org > http://postman.memetic.org/cgi-bin/mailman/listinfo/observium >

2 1

Maybe I got it Wrong.
by Dudu 11 Sep '14

11 Sep '14

Hi All, I'm new here and I'm not sure about the port view. I can see the neighbours and computers on the vlan on right side , the command looks like show ip arp Maybe it's better to map the computer to the port itself? sh mac address-table So out of the box we will know which server is connected to which port. That could help to find VM's as well. Many Thanks David.

3 3

Re: [Observium] how to make observium not to poll certain mibs
by Zhenhui Liang 10 Sep '14

10 Sep '14

I tried that. But seems only a few module are listed there. I think if I disable any of them, a big class of monitors would be disabled with it. I am looking for a way to disable certain mib/objects. Thanks a lot. Would removing/commenting out those objects from the mib file help? On 9/9/14, 2:19 PM, "Pedersen, Sean" <spedersen(a)io.com> wrote: >On the device's page in Observium, there is a small gear icon on the far >right hand side of the screen. Click on that. Then click on the MIBs link >in the Edit bar. You should see a list of MIBs associated with that >device. From there you can disable individual MIBs from being polled. > >-----Original Message----- >From: observium [mailto:observium-bounces@observium.org] On Behalf Of >Zhenhui Liang >Sent: Tuesday, September 09, 2014 2:11 PM >To: Observium Network Observation System >Subject: [Observium] how to make observium not to poll certain mibs > >Hi, Sorry if this has been answered. But I didn't find the answer in >doing search. > >So we have a router bug of memory leak core-dump which was caused by >observium trying to do snmpwalk against a certain mib. Vendor advise us >to upgrade the code to latest, which we can't do without significant >amount of coordination. So I am trying to figure out how to make >observium not to poll it. didn't find from gui. >If I delete the mib definition from the mibs/ sub dir, would that be >enough? > >Thanks a lot. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium > > >Founded in 2007, IO is a worldwide leader in software defined data center >technology, services and solutions that enable businesses and governments >to intelligently control their information. > >The communication contained in this e-mail is confidential and is >intended only for the named recipient(s) and may contain information that >is privileged, proprietary, attorney work product or exempt from >disclosure under applicable law. If you have received this message in >error, or are not the named recipient(s), please note that any form of >distribution, copying or use of this communication or the information in >it is strictly prohibited and may be unlawful. Please immediately notify >the sender of the error, and delete this communication including any >attached files from your system. Thank you for your cooperation. >_______________________________________________ >observium mailing list >observium(a)observium.org >http://postman.memetic.org/cgi-bin/mailman/listinfo/observium

3 4

The ports on the switches doesn't seems to display correct network throughput
by Arya, Renuka [BSD] - MED 10 Sep '14

10 Sep '14

Hi Team, I installed Observium recently. It seems to be working just fine. However, I do see discrepancies in the throughput result. When I run a network performance tool (Nuttcp) on one of the server and monitor the corresponding port on the switch through observium. I observe that the the server is generating around 9.8 Gbps data. If I check the ports directly on the switch I see same thing (~9.8 Gbps) but when I see in through observium on the corresponding port , I see frequent spikes to 12 - 15 Gbps. I am not sure why I am seeing these high value because the NICs on servers are having a 10 G NICs and I never see anything higher than 10 Gbps on server or on the port on the switch. But the real time graphs on Observium shows the spikes of around 12 - 15 Gbps. I would be really glad if you help me on this. I really like the tool but the discrepancy in the throughput result is kind of driving me crazy. Thanks! Regards Renuka ________________________________ This email is intended only for the use of the individual or entity to which it is addressed and may contain information that is privileged and confidential. If the reader of this email message is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this communication is prohibited. If you have received this email in error, please notify the sender and destroy/delete all copies of the transmittal. Thank you.

4 9

Re: [Observium] Eventlog time and date
by Tomasz Karczewski 10 Sep '14

10 Sep '14

Ok i've changed in php.ini date.timezone value to Europe/Warsaw and now is fine :) Tnx for the advice. Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Tomasz Karczewski Sent: Wednesday, September 10, 2014 1:22 PM To: 'Observium Network Observation System' Subject: Re: [Observium] Eventlog time and date SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); +--------------------------------+ | TIMEDIFF(NOW(), UTC_TIMESTAMP) | +--------------------------------+ | 02:00:00 | +--------------------------------+ 1 row in set (1.18 sec) php -i | grep timezone PHP Warning: Unknown: It is not safe to rely on the system's timezone settings. You are *required* to use the date.timezone setting or the date_default_timezone_set() function. In case you used any of those methods and you are still getting this warning, you most likely misspelled the timezone identifier. We selected the timezone 'UTC' for now, but please set date.timezone to select your timezone. in Unknown on line 0 Default timezone => UTC date.timezone => no value => no value date +%::z +02:00:00 Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie From: observium [mailto:observium-bounces@observium.org] On Behalf Of Mike Stupalov Sent: Wednesday, September 10, 2014 1:00 PM To: Observium Network Observation System Subject: Re: [Observium] Eventlog time and date Hi, On 10.09.2014 13:07, Tomasz Karczewski wrote: Hi there, I've got one question. Fresh eventlogs and syslogs have format <https://observium.man.olsztyn.pl/> -1y -1d -2h . How to change it? pls show some info for your server: 1. mysql timezone, from console: $ mysql SELECT TIMEDIFF(NOW(), UTC_TIMESTAMP); 2. php timezone: $ php -i | grep timezone 3. system timezone: $ date +%::z Tomasz Karczewski Administrator Sieci tkarczewski(a)man.olsztyn.pl http://www.man.olsztyn.pl http://www.uwm.edu.pl tel. (89) 523 45 55 fax. (89) 523 43 47 Ośrodek Eksploatacji i Zarządzania Miejską Siecią Komputerową OLMAN w Olsztynie Uniwersytet Warmińsko-Mazurski w Olsztynie _______________________________________________ observium mailing list observium(a)observium.org http://postman.memetic.org/cgi-bin/mailman/listinfo/observium -- Mike Stupalov http://observium.org

1 0